Velocity VMultra User manual

Using the DVD-RW
1. Press the button on the front of the VMultra drive to open the
DVD tray.
2. Insert your media disc.
3. Slide the tray closed. It will click in place.
Connecting
1. Connect the included USB cord to the back of the VMultra drive.
2. Connect the other end of the USB to your desktop or laptop.
3. Drivers will install automatically.
External Power
The VMultraThe VMultra
TM
drive is powered by the USB port. You will only
need to connect the external power supply when running
multiple applications.
External USB All-In-One | Quick Start Guide

For questions or troubleshooting, visit
VelocityMicro.com/support
Visit VelocityMicro.com to learn about Velocity Micro’s
full line of desktops, tablets, and PC accessories.
Using the USB 3.0/2.0 Ports
Connect any USB 2.0 or 3.0 device to the appropriate ports on
the side of the VMultra
TM
drive. USB 3.0 is backwards
compatible.
Using the SD/SDHC/MMC Card Slot
1. Insert your media card face up in the SD card slot. It will
click into place.
2. To remove, push inward and release.