SubContractor
'·
Series
SC·S
Subwoofer
Velodyne Acoustics, the # 1 rated subwoofer company
for
over
20
years, now offers the SubContractor Series - a powerful, easy-to-insta
ll
line of subwoofers with
an
outboard. rack-mountable amplifier specially
designed f
or
any
custom installation need.
The
SC-B
is the sma
ll
est
of the
se
Series subwoofers. Its small size,
shallow depth, and flush
rear
panel a
ll
ow
it
to
fit
anywhere.
It
connects
to the
SC-1250
amplifier with conventional speaker wire, giving it
maximum
placement
flexibility. The SC-8 can be placed facing
downward,
for
venting through the kick plate of a custom cabinet. No
other subwoofers
of
fer the compact, powerful, low-distortion bass of
the
se
Series!
Features
• Incredibly easy to insta
ll
and configure using conventional
speaker wire
• Small and sha
ll
ow -just
10
3
/4"
x
10
1/2" x 9 1
/8"
(HWD)
including gr
in
and feet
• Front-firing, sealed cabinet can
be
placed down-firing (feet included)
• Elegant black pica finish
• The matched
SC-1250
amplifier can power one
or
two
SC-B
subs (amp sold separately)
Powerful,
Linear
Drivers
The
SC
Series employs Velodyne's multi-layer, Kevlar reinforced, resin cones mounted
in
die-cast aluminum baskets
with massive magnet
structures.
Each driver incorporates Velodyne's unique dual-wound voice coil
that
assures linear
travel and allows for the heat dissipation needed to handle
the
gigantic power output of the
SC-1250
amplifier.
Easy
to
Install
and
Configure
Placement of the
SC-B
is easy due to its compact size, outboard amplifier, and recessed speaker wire connector.
The
SC-1250
rack-mountable amp
li
fier features
3000
watts
dynamic power and
1250
watts
of continuous RMS
power. The
SC-1250
also comes with DSP control, a built-in
7-band
automat
ic room
EQ,
12-volt trigger,
IR
repeater
jack,
RS-232 control
port
(Crestron
Cert
ified). and a full-featured
remote with factory listening presets. Standard speaker wire
is used to connect the
SC-1250
to the
SC-B.
The
SC-1250
can power up to TWO
SC-8
subs.
www.velodyne.com
