Veltia 02057 User manual

02055.W 0205902055.G 02063 02200.S 02200.W
TECHNICAL DATA
Related Products
Hair dryer to fix to wall
HAIR DRYER 02057
CODE
· Hot-air professional hair dryer.
· Support fixed to wall.
· Two selectors to adjust the flow and temperatureof air output with 2
positions each.
· Suitable for hotels.
· Operation: Continuous pressure switch.
· Fixing materials included.
· Support madeof black ABS, and chromeplated steel.
· Maximum dimensions: 220 highx 245 widex 118 deepmm. Spiral
cable length:450-1000 mm.
· Weight: 0,9Kg.
· Net voltage:220-240 V / 50-60Hz.
· Total power: 1600 W.
· Resistor power: 1450W.
· AC motor: 150W and22500 RPM.
· Electrical isolation: Class II. Protection rate:IP20.
· Airflow: 82 m3/h.
· Sound pressure:62 dBA.
·Air temperature at 10 cm: 59ºC.
Hot-air professional hair dryer VELTIA or similar, to fix to wall.
Equipped with two selectors to adjust the flow and the temperature
of air output. Total power: 1600 W. Maximum dimensions: 220
high x 245 wide x 118 deep mm.
SUGGESTED TEXT FOR PRESCRIPTION
These specifications can be modified and/or rectified due to manufacture requirements. PAGE 1

Ring base dimensions in mm
Productos Relacionados
Dimensions in mm
TECHNICAL DRAWING
To install the hair dryer, place the ring base at the desire position. Using it like a template, mark the position of the holes and make them through
a 6 mm drill . Insert the dowels into the holes, place the base in right position and screw the supplied screws. Fit the vandal-proof plastic caps in
the ring base holes (figure 2). Plug the appliance to the electric network. From that moment, the hair dryer can stay in the ring provided forthat
purpose and is ready for use.
Installation should be as shown in fig-0. The recommended heigh is 130-150 cm to floor, or 110 for adapted toilets.
INSTALLATION
These specifications can be modified and/or rectified due to manufacture requirements. PAGE 2
Hair dryer to fix to wall
HAIR DRYER 02057
CODE