Vemmio FL-100 User manual

WWW.VEMMIO.COM
flood
sensor
MODEL: FL-100
V1.0
INTRODUCTION
Thank you for choosing Vemmio. We welcome you in our customer society.
Flood Sensor is a battery powered Z-Wave Plus device that can detect wet-
ness and send a notification. With Vemmio Flood Sensor you can gain peace
of mind and reliable security against water damage. Perfect for use in fre-
quently wet spaces. This sensor can be set up to trigger sirens, lights or even
turn off the water when used with water main shut-off valve. The sensor
works with any Z-Wave-certified gateway.
PACKAGE CONTENTS:
• user manual
• sensor.
KE Y FE ATU RE S
Early detection of impending water damage
Low energy consumption
Easy to use in hard to reach area thanks to 120 cm long sensor cable.
Wireless standard Z-Wave Plu s
Frequency 868.40 MHz
Network range up to 100 m line of sight
Operating temperature -10°C ~ 50°C
Working humidity maximum 95%
Battery 2 x AAA
Battery: run time 1 year, low power indication
BAT TE RY INS TALLATION
When the device reports the low battery message, the
user should replace the batteries to new ones. The device
requires 2x AAA, 1.5V batteries.
To access the batteries, when the product is mounted, sim-
ply slide up the front cover.
INSTALL ATI O N
The Z-Wave button, located behind the cover, can add,
remove, reset or associate the sensor to Z-Wave network
ADDING THE DEVICE INTO THE Z-WAVE NETWORK
INCLUSION*
Bring the Flood Sensor within direct range of your controller. Slide down the
back cover to access Z-Wave button. Follow the instructions for your Z-Wave
certified controller to enter inclusion mode. When prompted by the control-
ler, press the Z-Wave button quickly 3 times in a row. You will notice green
LED flashing quickly 9 times and once it is included the flashing will stop in-
dicating successful inclusion to your Z-Wave network. The sensor should ap-
pear on your controller’s device list. If the first attempt is unsuccessful, please
repeat the process following all steps carefully.
*Please note: Always exclude a Z-wave product before trying to add it to a
Z-Wave network.
Please note: inclusion may vary depending on your gateway - please see
gateway manual for details.
EXCLUSION
Bring the Flood Sensor within direct range of your controller. Slide down
the back cover (or once mounted-slide up the front cover) to access Z-Wave
button. Follow the instructions for your Z-Wave certified controller to enter
exclusion mode. When prompted by the controller, press the Z-wave button
quickly 3 times in a row. The green LED indicator will flash slowly 6 times indi-
cating successful exclusion. The sensor should disappear from your control-
ler’s device list.
TROUBLESHOOTING TIPS
If you are unable to include the Flood Sensor to your controller, please try
one of the following:
• Bring the Flood Sensor closer to your Z-Wave controller.
• Once in inclusion mode, press and release the Z-Wave button quickly 6-7
times to ensure the command has gone through.
• Put your controller into exclusion mode. Press the Z-Wave button quickly 3
times, and then try adding it to your network again.
ASSOCIATION
Have Z-Wave Controller enter association mode.
Pressing Z-Wave button three times within 1.5 seconds will enter associa-
tion mode.
PHYSICAL INSTALLATION
Choosing a Suitable Location
a. Choose an area prone to flooding .
b. The probe should touch the surface.
c. When choosing a suitable location remember that the sensor will only
react once the water reaches the probe.
MOUNTING
Pay attention! Include the Flood Sensor to your Z-Wave network before
mounting it.
To mount the device, after having chosen even surface, remove protective
layer from the double coated tape and stick the sensor onto the surface.
Make sure the probe has contact with the surface prone to flooding.
Please note: After completing installation it’s recommended to test sen-
sor’s operation by placing the probe onto water surface.
Over the Air Firmware Update
The device supports the Z-Wave firmware update via OTA. Before starting
the procedure, please remove the cover of the device. Otherwise the hard-
ware check will fail. Let the controller into the firmware update mode, and
then press the Z-Wave button once to start the update. After completing
the firmware download, LED will start flashing every 0.5 second. During this
time, please don’t remove the battery, otherwise it will cause the firmware
failure, and the device will stop functioning. After LED stops flashing, it is rec-
ommended that user powers up the device. Caution: After battery removal,
please wait about 30 seconds, and then re-install the battery.
Supported Command Classes:
COMMAND_CLASS_ZWAVEPLUS_INFO
COMMAND_CLASS_VERSION
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_BATTERY
COMMAND_CLASS_ALARM
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_FIRMWARE_UPDATE_MD
COMMAND_CLASS_WAKE_UP
COMMAND_CLASS_SENSOR_BINARY
COMMAND_CLASS_SENSOR_ALARM
WARRANTY
This Limited Warranty applies to physical goods, and only for physical goods,
purchased from Vemmio (the “Physical Goods”). This Limited Warranty of
Vemmio, applies to products manufactured and distributed by Vemmio.
PRODUCTS COVERED AND DURATION OF WARRANTY
Warranty Period: 12 months for business customer and 24 months for indi-
vidual customer from the date of purchase.

WWW.VEMMIO.COM
The product purchased shall be free from defects in material and workmanship
from the date of purchase.
This Limited Warranty covers any defects in material or workmanship under
normal use during the Warranty Period.
PRODUCTION STATUS
Each product is manufactured from new parts.
TERMS OF THE WARRANTY
Vemmio warrants that the product you have purchased from Vemmio or a
Vemmio’s authorized reseller is free from defects in materials and workman-
ship under normal use during the warranty period. The warranty period begins
on the day of purchase. The warranty extends only to the original purchaser. It
is not transferable to anyone who subsequently purchases the product from
the original purchaser.
During the Warranty Period, Vemmio will repair or replace (at the sole discre-
tion of Vemmio), at no charge, products or parts of a product that proves defec-
tive. Once the defected product, during the guarantee period, is returned, it
will be repaired or replaced no later than within 30 days. The warranty period
is extended by the amount of days it has taken to repair or replace the product.
All used elements changed under the guarantee become the property of Vem-
mio. The warranty period for replaced elements expires on the same date as
the original warranty period for the product. There is a possibility that it will
not be feasible to repair or replace the product ( for example when the product
is no longer a part of Vemmio’s offer). Should this happen, Vemmio will repair/
replace the product with parts/product of similar technical characteristics.
Such procedure will result in fulfilling Vemmio’s warranty obligation against
the customer. It is not possible to have money returned by Vemmio for the
purchased product. Warranty claim rated by Vemmio as unwarranted will be
charged for handling and servicing costs.
Vemmio may reject a warranty claim if:
• the product has not been operated according to its intended purpose and
the user manual
• the returned product is incomplete
• the cause of insufficient operation is other than a material or production defect
• warranty date has expired or if the customer can not provide proof of purchase.
The Limited Warranty extends only to products purchased from Vemmio or a
Vemmio’s authorized reseller. The Limited Warranty does not extend to any
product that has been damaged or rendered defective (a) as a result of acci-
dent, misuse or abuse; (b) as a result of an act of God; (c) by operation outside
the usage parameters stated in the user manual; (d) by the use of parts not
manufactured or sold by Vemmio (e) by modification of the product; (f) as a re-
sult of war or terrorist attack; or (g) as a result of service by anyone other than
Vemmio or a Vemmio’s authorized service center.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, VEMMIO MAKES
NO OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY
IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE. VEMMIO EXPRESSLY DISCLAIMS ALL WARRANTIES
NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES
THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS
EXPRESS LIMITED WARRANTY.
LIMITED WARRANTY STATEMENT
VEMMIO is not liable for any damages caused by the product or by the failure
of the product to perform, including any lost profits, lost savings, incidental
damages, or consequential damages. VEMMIO is not liable for any claim made
by a third party or made by you for a third party.
This limitation applies whether damages are sought, or a claim made, under
this warranty or as a tort claim (including negligence and strict product li-
ability), a contract claim, or any other claim. This limitation can not be waived
or amended by any person. This limitation of liability will be effective even if
VEMMIO or an authorized VEMMIO’S representative has been advised by
you of the possibility of any such damages.
HOW TO OBTAIN WARRANTY SERVICE?
Please contact us first through [e-mail] for advice because we are
very often able to resolve issues/problems without the need for warranty claim.
For a defect during the warranty period, you will need a proof of purchase.
Contact your place of purchase or a Vemmio’s authorized service center. Re-
turn the defective item, freight and insurance prepaid, in the original packaging
to your place of purchase. Vemmio is not responsible for any loss or damages
incurred in shipping. A Vemmio Failure Analysis/Test Engineer or a Vemmio’s
authorized reseller must validate all warranty claims.
WHAT IS NOT COVERED BY THIS WARRANTY?
Product purchased from anyone other than Vemmio or a Vemmio’s authorized
reseller.
Routine cleaning or normal cosmetic and mechanical wear.
Damage from misuse, abuse or neglect including ingress of water, dust or dam-
age from dropping.
Damage from use outside the product’s usage or storage parameters.
Damage from use of parts not manufactured or sold by Vemmio.
Damage from modification or incorporation into other products.
Damage from repair or replacement of warranted parts by a service provider
other than a Vemmio’s authorized service provider.
Damage from failure to perform preventative maintenance as imposed by the
application environment (such as recurrent cleaning in dusty surroundings).
DECLARATION OF CONFORMITY
The manufacturer Vemmio Sp. z o.o. declares under sole responsibility that
the product:
Marketing model: Flood Sensor
Regulatory model: FL-100
Brand name: Vemmio
is in conformity with the Low Voltage Directive 2009/95/EC, EMC Directive
2004/108/EC, R&TTE Directive 1995/5/EC and carries the CE marking ac-
cordingly.
The following harmonized standards were applied:
R&TTE (1995/5/EC)
EN 300 220-1: V2.4.1
EN 300 220-2: V2.4.1
EMC (2004/108/EC)
EN 301 481-1: V1.9.2
EN 301 489-3: V1.6.1
LVD (2006/95/EC)
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011
Changes of modification not expressly approved by Vemmio Sp. z o.o. for
compliance could void the user’s authority to operate the equipment.
FCC INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
IN ACCORDANCE WITH ROHS 2011/65/EU
WARNING
Do not dispose of electrical appliances as unsorted mu-
nicipal waste, use separate collection facilities. Contact
your local government for information regarding the
collection systems available. If electrical appliances
are disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and well-be-
ing. When replacing old appliances with new once, the retailer is legally obli-
gated to take back your old appliance for disposal at least for free of charge.
Please note: Vemmio provides this publication “as is” without warranty of
any kind, either express or implied, including, but not limited to implied war-
ranties of merchantability or fitness for a particular purpose. The published
information in the manual is subject to change without notice. Vemmio re-
serves the right to make changes in the product design, layout, and driver re-
visions without notification to its users. This version of the installation guide
supersedes all previous versions.
Although Vemmio has attempted to ensure the accuracy of the content of
this manual, it is possible that this document may contain technical inaccu-
racies, typographical, or other errors. Vemmio assumes no liability for any
error in this publication, and for possible damages, whether direct, indirect,
incidental, and consequential or otherwise, that may result from such error,
including, but not limited to loss of data or profits.