VERITAS NetBackup 5330 User manual

Veritas NetBackup™ 5330
Appliance Product
Description

Veritas NetBackup™ 5330 Appliance Product
Description
Last updated: 2019-03-06
Legal Notice
Copyright © 2018 Veritas Technologies LLC. All rights reserved.
Veritas, the Veritas Logo, and NetBackup are trademarks or registered trademarks of Veritas
Technologies LLC or its affiliates in the U.S. and other countries. Other names may be
trademarks of their respective owners.
This product may contain third party software for which Veritas is required to provide attribution
to the third party (“Third Party Programs”). Some of the Third Party Programs are available
under open source or free software licenses. The License Agreement accompanying the
Software does not alter any rights or obligations you may have under those open source or
free software licenses. Refer to the third party legal notices document accompanying this
Veritas product or available at:
https://www.veritas.com/about/legal/license-agreements
The product described in this document is distributed under licenses restricting its use, copying,
distribution, and decompilation/reverse engineering. No part of this document may be
reproduced in any form by any means without prior written authorization of Veritas Technologies
LLC and its licensors, if any.
THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED
CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH
DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. VERITAS TECHNOLOGIES LLC
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS
DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS
SUBJECT TO CHANGE WITHOUT NOTICE.
The Licensed Software and Documentation are deemed to be commercial computer software
as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19
"Commercial Computer Software - Restricted Rights" and DFARS 227.7202, et seq.
"Commercial Computer Software and Commercial Computer Software Documentation," as
applicable, and any successor regulations, whether delivered by Veritas as on premises or
hosted services. Any use, modification, reproduction release, performance, display or disclosure
of the Licensed Software and Documentation by the U.S. Government shall be solely in
accordance with the terms of this Agreement.
Veritas Technologies LLC
500 E Middlefield Road
Mountain View, CA 94043

http://www.veritas.com
.
Technical Support
Technical Support maintains support centers globally. All support services will be delivered
in accordance with your support agreement and the then-current enterprise technical support
policies. For information about our support offerings and how to contact Technical Support,
visit our website:
https://www.veritas.com/support
You can manage your Veritas account information at the following URL:
https://my.veritas.com
If you have questions regarding an existing support agreement, please email the support
agreement administration team for your region as follows:
[email protected]Worldwide (except Japan)
[email protected]Japan
Documentation
The latest documentation is available on the Veritas website:
https://sort.veritas.com/documents
Documentation feedback
Your feedback is important to us. Suggest improvements or report errors or omissions to the
documentation. Include the document title, document version, chapter title, and section title
of the text on which you are reporting. Send feedback to:
[email protected]
You can also see documentation information or ask a question on the Veritas community site:
http://www.veritas.com/community/
Veritas Services and Operations Readiness Tools (SORT)
Veritas Services and Operations Readiness Tools (SORT) is a website that provides information
and tools to automate and simplify certain time-consuming administrative tasks. Depending
on the product, SORT helps you prepare for installations and upgrades, identify risks in your
datacenters, and improve operational efficiency. To see what services and tools SORT provides
for your product, see the data sheet:
https://sort.veritas.com/data/support/SORT_Data_Sheet.pdf

Chapter 1 NetBackup 5330 Appliance overview ........................... 6
About the NetBackup 5330 Appliance ................................................ 7
NetBackup 5330 Appliance system features ........................................ 7
Serial number locations ........................................................... 10
NetBackup 5330 Appliance compute node disk drive configurations
..................................................................................... 11
NetBackup 5330 Appliance compute node control panel
information ...................................................................... 13
About the NetBackup 5330 Appliance compute node rear panel
..................................................................................... 14
NetBackup 5330 Appliance compute node PCIe slot I/O
configuration options ......................................................... 15
NetBackup 5330 Appliance compute node Ethernet port
configurations .................................................................. 17
Dual-port 10 Gb Ethernet card with SFP+ transceiver ports ............. 18
Dual-port 8 Gb Fibre Channel Host Bus Adapter (FC HBA)
specifications ................................................................... 19
About NetBackup 5330 Appliance storage shelves .............................. 20
Available appliance storage options ........................................... 20
About the NetBackup 5330 Appliance Primary Storage Shelf and
Expansion Storage Shelf front panel ..................................... 22
About the NetBackup 5330 Appliance Primary Storage Shelf and
Expansion Storage Shelf rear panels .................................... 23
Best practices for rack installation .................................................... 29
Chapter 2 NetBackup 5330 Appliance cables .............................. 31
Power cables ............................................................................... 31
Network cable .............................................................................. 32
Multi-Mode fiber optic cable ............................................................ 33
Appendix A Technical specifications, standards, and
compliance information .............................................. 35
NetBackup 5330 Appliance system technical specifications ................... 35
Environmental specifications ........................................................... 38
Contents

Protocol standards ........................................................................ 39
Regulatory, compliance, and certification information ........................... 40
Index .................................................................................................................... 41
5Contents

NetBackup 5330
Appliance overview
This chapter includes the following topics:
■About the NetBackup 5330 Appliance
■NetBackup 5330 Appliance system features
■About NetBackup 5330 Appliance storage shelves
■Best practices for rack installation
1
Chapter

About the NetBackup 5330 Appliance
Fibre channel (FC) cables connect the NetBackup 5330 Appliance compute node
to the Primary Storage Shelf. SAS cables connect the Primary Storage Shelf to the
Expansion Storage Shelf.
See “ NetBackup 5330 Appliance system features” on page 7.
NetBackup 5330 Appliance system features
Table 1-1 NetBackup 5330 Appliance system features
DescriptionFeature
Red Hat Enterprise Linux 7.4Operating system
7NetBackup 5330 Appliance overview
About the NetBackup 5330 Appliance

Table 1-1 NetBackup 5330 Appliance system features (continued)
DescriptionFeature
Processors
■Two Intel Xeon 10 core 2.80GHz E5-2680 v2 CPUs
or
Two Intel Xeon 10 core 3.00GHz E5-2690 v2 CPUs
■Supports high-performance processors with low-power
consumption.
■Provides high-capacity intra-appliance switching
bandwidth, along with high I/O throughput.
Performance
Up to 960 TiB (1,056 TB) for MSDP deduplication data
storage, and up to 1.374 PB for AdvancedDisk and Copilot
non-deduplicated data storage. The amount of MSDP or
AdvancedDisk/Copilot data storage you want to allocate
depends on the amount of storage that you purchase with
the NetBackup 5330 Appliance.
You can allocate the usable storage capacity in part or
completely to an MSDP deduplication pool, or to an
AdvancedDisk or Copilot non-deduplicated storage pool.
Note the following:
■Maximum usable storage capacity for an MSDP data
pool is 960 TiB (1,056 TB), even if the system supports
1.374 PBs of total usable storage capacity.
■Total usable storage capacity for an AdvancedDisk or
Copilot data can be up to 1.374 PB.
Note: Creating an MSDP deduplication pool may cause
the usable space that is available for the AdvancedDisk
or Copilot data pool to fluctuate. The amount of space
fluctuation depends on how much space the MSDP pool
uses.
Storage capacity
16 GB x 24; total RAM: 384 GBSystem memory configuration
(DIMMs)
24 GBRAID cache
The deduplication engine provides up to 100 times reduction
in storage. The client-side plug-in provides similar levels of
bandwidth reduction.
Space reduction
See “Available appliance storage options” on page 20.Scalable architecture
8NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

Table 1-1 NetBackup 5330 Appliance system features (continued)
DescriptionFeature
Supports redundant hot-swappable disks and power
modules.
High availability
Provides separate out-of-band management network
interfaces. You can remotely turn on, turn off, and reset
appliances through the network.
Supports the SNMP traps and automatically reports alarms.
Reports disk information through the out-of-band
management channel.
Easy management
RAID1 (striping and mirroring) and RAID6 (block level
striping with double distributed parity) are used as follows:
■NetBackup 5330 compute node system disks: RAID1
■Storage shelf data storage disks: RAID6
RAID levels
The NetBackup 5330 compute node can be ordered with
two, three, five, or six Fibre Channel (FC) HBA cards
already installed. Each card includes two standard Fibre
Channel ports. If less than six FC HBA cards are ordered,
a 10 Gb Ethernet card with two standard ports can be
ordered. The compute node uses the QLE2562, a QLogic
8 Gb FC PCIe dual port adapter.
Fibre Channel support
One 1 Gb/s IPMI remote network port
One VGA port
Four 1 GbE network ports, with an RJ-45 connector, and
link and activity LEDs. Two of the ports are reserved for
private networks.
Two 10 GbE network ports, with Small Form-factor
Pluggable (SFP) modules, and link and activity LEDs.
See “About the NetBackup 5330 Appliance compute node
rear panel” on page 14.
Rear panel ports
See “NetBackup 5330 Appliance compute node disk drive configurations”
on page 11.
See “NetBackup 5330 Appliance compute node disk drive LED descriptions”
on page 12.
See “NetBackup 5330 Appliance compute node control panel information”
on page 13.
9NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

See “About the NetBackup 5330 Appliance compute node rear panel” on page 14.
See “NetBackup 5330 Appliance compute node PCIe slot I/O configuration options”
on page 15.
See “NetBackup 5330 Appliance compute node Ethernet port configurations”
on page 17.
See “Dual-port 8 Gb Fibre Channel Host Bus Adapter (FC HBA) specifications”
on page 19.
Serial number locations
A vertical bar on the rear panel of the compute node contains the serial number.
The serial number of the storage shelves is located in two places.
■The front of the shelf contains the serial number, on the lower right-hand corner.
■The top of the storage shelf includes the serial number label, near the rear of
the unit. The number is outlined in red.
10NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

NetBackup 5330 Appliance compute node disk drive configurations
Figure 1-1 NetBackup 5330 Appliance compute node front panel disk slot
assignments
NetBackup 5330 Appliance compute node disk slot assignments and RAID disk
assignments:
■Slot 0 - Disk0 of RAID1, Volume 0 (set as the Boot volume and contains the
operating system)
■Slot 1 - Disk1 of RAID1, Volume 0 (set as the Boot volume and contains the
operating system)
■Slot 2 - Hot spare disk
■Slot 3 - Disk0 of RAID1, Volume 1 (contains the swap file for the operating
system, along with log files)
■Slot 4 - Disk1 of RAID1, Volume 1 (contains the swap file for the operating
system, along with log files)
■Slot 5 - Hot spare disk
Note: Slots 6, 7, 8, 9, 10, and 11 are intentionally empty for compute node cooling
purposes.
See “NetBackup 5330 Appliance compute node disk drive LED descriptions”
on page 12.
11NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

NetBackup 5330 Appliance compute node disk drive LED
descriptions
Each disk drive module contains two LEDs on the left-hand side of each module.
The LEDs appear as follows:
■The LED on the top is solid amber when a disk drive fault occurs. This LED is
not lit when there are no disk drive faults.
■The LED on the bottom is solid green when power is supplied to the disk drive.
This LED flashes green when the disk drive is active.
Note that the disk drive modules that do not contain disk drives also have LEDs.
Although there is no drive activity going on, some colored lights may still be seen
through the disk modules.
Figure 1-2 Disk drive module LEDs
Amber Status LED
Green Activity LED
Table 1-2 Disk drive module LED descriptions
Description/BehaviorConditionLED color
No access and no faultOffAmber
A hard drive fault has
occurred
OnAmber
A RAID rebuild is in progress
(1 Hz), Identify (2 Hz)
BlinkingAmber
LED stays onPower on with no drive
activity
Green
LED blinks off when
processing a command
Power on with drive activityGreen
LED stays offPower on and drive spun
down
Green
LED blinksPower on and drive spinning
up
Green
12NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

NetBackup 5330 Appliance compute node control panel information
The front panel of the NetBackup 5330 Appliance compute node includes a small
panel that is attached to the right side of the device. System information is shown
on this panel.
Figure 1-3 NetBackup 5330 Appliance compute node control panel
1
4
2
3
5
6
7
8
10
9
Table 1-3 LED panel descriptions
DescriptionLabel
AC power button with integrated LED (executes a shutdown before turning
off power)
1
Hard drive activity LED2
ID button with integrated LED3
Cold reset button (restarts the appliance instantly)4
NIC4/eth3 activity LED (for public use)5
NIC3/eth2 activity LED (for public use)6
NMI button (recessed; a tool is required for use)7
NIC1/eth0 activity LED (for public use)8
NIC2/eth1 activity LED (for public use)9
Status LED10
13NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

About the NetBackup 5330 Appliance compute node rear panel
The rear panel of a NetBackup 5330 Appliance compute node has several access
ports and other features, which are displayed in the following diagram and table.
Figure 1-4 NetBackup 5330 Appliance compute node rear panel access
ports and features
1
11
23 4 5 6 7 8 9 10 11
13 12
Table 1-4 NetBackup 5330 Appliance compute node port functions
FunctionNumber
Power Supply Modules #1, #2 (120/220VAC)1,2
3,4
5,6
DB-15 VGA connector7
RJ45 Serial-A port (reserved)8
USB connectors9
A NIC port for IPMI remote management10
11
Add-in PCIe adapter slots (Fibre Channel, 1
Gb Ethernet)
12
Serial-B port (reserved)13
The serial number is located on a vertical bar on the rear panel of the appliance.
14NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

Figure 1-5 Serial number location
The ports on the rear panel are color-coded for easy identification.
Figure 1-6 NetBackup 5330 Appliance compute node rear port colors
NIC1/
ETH0
NIC2/
ETH1
NIC3/
ETH2
NIC4/
ETH3 IPMI NIC5/
ETH4
NIC6/
ETH5
The rear panel also has two sets of low profile, full height, 3.5" form factor PCIe
slots.
See “NetBackup 5330 Appliance compute node PCIe slot I/O configuration options”
on page 15.
NetBackup 5330 Appliance compute node PCIe slot I/O configuration
options
The rear panel of the NetBackup 5330 Appliance compute node contains six PCIe
slots that are numbered 1 to 6. Slots 1, 2, and 3 are located in PCIe Riser Assembly
2. Slots 4, 5, and 6 are located in PCIe Riser Assembly 1.
15NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

Riser 2 Riser 1
Slot 1
Slot 2
Slot 3 Slot 6
Slot 4
Slot 5
PCIe slots are populated with one of the following cards:
■16Gb Fibre Channel (FC) host bus adapter (HBA) card
■8Gb Fibre Channel (FC) host bus adapter (HBA) card
■10Gb Ethernet network interface card (NIC)
Slots 1 and 4 are reserved exclusively for attachment to the Primary Storage Shelf.
For complete information about FC HBA card usage, see the NetBackup Appliance
Fibre Channel Guide.
Table 1-5 describes the default PCIe slot I/O configuration options for the NetBackup
5330 Appliance.
Note: A NetBackup appliance high availability (HA) configuration must use two
identical appliances with regard to model number and hardware configuration.
For example, use two model 5330 appliances with configuration D. You cannot use
one model 5330 appliance with configuration D and one model 5340 appliance with
configuration D.
This requirement applies to all of the I/O configurations for each model.
Table 1-5 Available PCIe slot I/O configuration options for the NetBackup
5330 Appliance compute node
Slot 6Slot 5Slot 4Slot 3Slot 2Slot 1I/O
configuration
option
10GbE
NIC
10GbE
NIC
16Gb FC
HBA
10GbE
NIC
10GbE NIC16Gb FC
HBA
A
8Gb FC
HBA
10GbE
NIC
16Gb FC
HBA
10GbE
NIC
10GbE NIC16Gb FC
HBA
B
8Gb FC
HBA
8Gb FC
HBA
16Gb FC
HBA
10GbE
NIC
10GbE NIC16Gb FC
HBA
C
16NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

Table 1-5 Available PCIe slot I/O configuration options for the NetBackup
5330 Appliance compute node (continued)
Slot 6Slot 5Slot 4Slot 3Slot 2Slot 1I/O
configuration
option
8Gb FC
HBA
8Gb FC
HBA
16Gb FC
HBA
10GbE
NIC
8Gb FC
HBA
16Gb FC
HBA
D
8Gb FC
HBA
8Gb FC
HBA
16Gb FC
HBA
8Gb FC
HBA
8Gb FC
HBA
16Gb FC
HBA
E
See “NetBackup 5330 Appliance compute node Ethernet port configurations”
on page 17.
NetBackup 5330 Appliance compute node Ethernet port
configurations
The NetBackup 5330 Appliance includes the following Ethernet ports, which are
included along the base of the rear panel:
■1 GbE ports: eth0, eth1, eth2, and eth3
■10 GbE ports: eth4 and eth5
In addition, the NetBackup 5330 Appliance compute node also includes additional
PCIe card-based 10 Gb Ethernet ports.
The following picture shows the location of all Ethernet ports on the rear panel of
the compute node, including the PCIe card-based ports.
eth7 eth6
eth9 eth8
eth13 eth12
eth11 eth10
eith0
eth3eth1
eth2
eth5
eth4
NetBackup 5330 compute node PCIe card-based 10 Gb Ethernet port designations:
■Slot 2: eth9 (left), eth8 (right)
■Slot 3: eth7 (left), eth6 (right)
■Slot 5: eth11 (left), eth10 (right)
■Slot 6: eth13 (left), eth12 (right)
17NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

See “Dual-port 10 Gb Ethernet card with SFP+ transceiver ports” on page 18.
See “Dual-port 8 Gb Fibre Channel Host Bus Adapter (FC HBA) specifications”
on page 19.
Dual-port 10 Gb Ethernet card with SFP+ transceiver ports
The 10Gb Ethernet card with SFP+ transceivers is available with the appliance.
The card can be installed in the PCI Riser Assembly in addition to Fibre Channel
cards.
Table 1-6 Dual-port 10Gb Ethernet card specifications
SpecificationItem
2.54 in x 6.6 in (6.4516 cm to 16.764 cm)
(low-profile)
Dimensions
Typical: 7.4 watts at 0°C to 55°C (32°F to
131°F)
Power consumption
0°C to 55°COperating temperature
-40°C to +70°C (-40°F to +158°F)Storage temperature
10% RH to 90% RH (operating,
non-condensing) and 5% RH to 93% RH
(non-operating, non-condensing)
Storage humidity
PCIe v3.0System interface type
8.0 GT/s (gigatransfers per second)Speed and slot width
18NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

Table 1-6 Dual-port 10Gb Ethernet card specifications (continued)
SpecificationItem
Fibre Channel over Ethernet (FCoE), Network
File System (NFS)
Storage over Ethernet
Optical: 1GbE/10GbE
Direct attach: 10GbE
Data rate supported per port
LINK (solid) and ACTIVITY (blinking)
LINK SPEED (green=10Gbps; yellow=1Gbps)
LED indicators
FCC B, UL, CE, VCCI, BSMI, CTICK, KCCCertifications
50 LFM (linear feet per minute)Air flow (minimum)
0 to 55 C (32 to 131 F)Operating temperature
-40 to 70 C (-40 to 158 F)Storage temperature
90% non-condensing relative at 35 CStorage humidity
See “Dual-port 8 Gb Fibre Channel Host Bus Adapter (FC HBA) specifications”
on page 19.
See “NetBackup 5330 Appliance compute node Ethernet port configurations”
on page 17.
Dual-port 8 Gb Fibre Channel Host Bus Adapter (FC HBA)
specifications
The Fibre Channel (FC) host bus adapter ports are used to connect the appliance
to a Primary Storage Shelf, along with clients and other devices for Fibre Transport
data transfer.
8 Gb FC HBA
19NetBackup 5330 Appliance overview
NetBackup 5330 Appliance system features

Table 1-7 Dual-port 8 Gb Fibre Channel Host Bus Adapter specifications
DescriptionItem
2.54 in x 6.6 in (6.4516 cm to 16.764 cm)
(low-profile)
Dimensions
Typical: 6.2 watts at 0°C to 55°C (32°F to
131°F)
Power consumption
0°C to 55°COperating temperature
-40°C to +70°C (-40°F to +158°F)Storage temperature
10% RH to 90% RH (operating,
non-condensing) and 5% RH to 93% RH
(non-operating, non-condensing)
Storage humidity
See “Dual-port 10 Gb Ethernet card with SFP+ transceiver ports” on page 18.
See “NetBackup 5330 Appliance compute node Ethernet port configurations”
on page 17.
About NetBackup 5330 Appliance storage shelves
The NetBackup 5330 Appliance storage system supports two types of
externally-connected hard disk drive-based storage shelves.
These include:
■A Primary Storage Shelf (required)
■One or more Expansion Storage Shelves (optional)
Available appliance storage options
You can configure the NetBackup 5330 Appliance for use with up to 1374 TB of
available storage capacity.
The following sections explain the storage options that are available with the different
software versions of the NetBackup 5330 Appliance.
Storage options for a NetBackup 5330 Appliance that runs
software versions 3.1.1 an 3.1.2
The following table shows the available storage options for NetBackup 5330
Appliances that run software revisions 3.1.1 and3.1.2.
20NetBackup 5330 Appliance overview
About NetBackup 5330 Appliance storage shelves