Vermeer S925TX User manual

S925TX
Mini Skid Steer
Operator’s
Manual
S925TX_o1_00
Serial No. 101 -
Order No. 105400EM9
Cabled Assembly Order No. 163743991

Introduction S925TX Mini Skid Steer
Introduction
This manual explains the proper operation of your machine. Study and understand these instructions thoroughly before operating or
maintaining the machine. Failure to do so could result in personal injury or equipment damage. Consult your Vermeer dealer if you
do not understand the instructions in this manual, or need additional information.
The instructions, illustrations, and specifications in this manual are based on the latest information available at time of publication.
Your machine may have product improvements and features not yet contained in this manual.
Vermeer Corporation reserves the right to make changes at any time without notice or obligation.
Operation instructions are included in the two Operator’s Manuals provided with the machine. The tethered (cabled)
manual must remain attached to the machine for ready reference. Store it in the manual storage box when not in use.
Lubrication and maintenance procedures are in the Maintenance Manual provided with the machine. Refer to it for all
lubrication and maintenance procedures.
Additional copies of the manuals, and Operations and Safety video, are available from your dealer. Reorder numbers are listed on the
front covers of the manuals and on the video.
Copies of this manual, and the Operations and Safety video, are available in Spanish from your dealer. Other languages may be
available.
Su distribuidor dispone de ejemplares en español de este manual y del vídeo de Operaciones y Seguridad.
NOTICE TO OWNER
Replacement manuals are free of charge by registering your used Vermeer machine. Your machine’s Operator’s, Maintenance and
Parts Manuals may be available online at www.myvermeer.com. For questions about online or printed manuals, or to register a used
machine, contact the Customer Data Department by telephone: [phone] or 641-628-3141; email: [e-mail];
internet: www.vermeer.com or www.myvermeer.com; or, letter: Customer Data Dept., Vermeer Corporation, PO Box 200, Pella IA
50219 USA.

S925TX Mini Skid Steer Introduction
Orientation: Right and left sides of the machine are determined by standing on the operator platform and facing forward.
TRADEMARKS
VERMEER, VERMEER Logo, and EQUIPPED TO DO MORE are trademarks of Vermeer Manufacturing Company.
KUBOTA is a trademark of Kubota Co.
Chevron and Delo are trademarks of Chevron Intellectual property LLC.
Mobil and Delvac are trademarks of Exxon Mobil Corporation.
Shell and Rotella are trademarks of Shell Trademark Management B.V.

Introduction S925TX Mini Skid Steer
VERMEER NEW INDUSTRIAL EQUIPMENT LIMITED WARRANTY
(EFFECTIVE AUGUST 1, 2013) WARRANTY PERIOD: 12 Months / 1000 Hours
Vermeer Corporation (hereinafter “Vermeer”) warrants each new Industrial product of Vermeer’s manufacture to be free from defects
in material and workmanship, under normal use and service for one (1) full year after initial purchase/retail sale or 1000 operating
hours, whichever occurs first. This Limited Warranty shall apply only to complete machines of Vermeer’s manufacture, parts are
covered by a separate Limited Warranty. EQUIPMENT AND ACCESSORIES NOT OF VERMEER’S MANUFACTURE ARE
WARRANTED ONLY TO THE EXTENT OF THE ORIGINAL MANUFACTURER’S WARRANTY AND SUBJECT TO
THEIR ALLOWANCE TO VERMEER ONLY IF FOUND DEFECTIVE BY SUCH MANUFACTURER.
EXTENDED WARRANTY OPTIONS ARE AVAILABLE FOR PURCHASE WARRANTY TERMS During the Limited
Warranty period specified above, any defect in material or workmanship in any warranted item of Vermeer Industrial Equipment not
excluded below shall be repaired or replaced at Vermeer’s option without charge by any authorized independent Vermeer dealer. The
warranty repair or replacement must be made by a Vermeer independent authorized dealer at the dealer’s location. Vermeer will pay
for replacement parts and such authorized dealer’s labor in accordance with Vermeer’s labor reimbursement policy. Vermeer reserves
the right to supply remanufactured replacement parts as it deems appropriate.
RETAIL PURCHASER RESPONSIBILITY: This Limited Warranty requires proper maintenance and periodic inspections of the
Industrial Equipment as indicated in the Operator’s/Maintenance Manual furnished with each new Industrial Equipment. The cost
of routine or required maintenance and services is the responsibility of the retail purchaser. The retail purchaser is required to keep
documented evidence that these services were performed. This Vermeer New Industrial Equipment Limited Warranty may be
subject to cancellation if the above requirements are not performed. Vermeer Industrial Equipment with known failed or defective
parts must be immediately removed from service.

S925TX Mini Skid Steer Introduction
EXCLUSIONS AND LIMITATIONS
The warranties contained herein shall NOT APPLY TO:
(1) Any defect which was caused (in Vermeer’s sole judgment) by other than normal use and service of the Industrial Equipment,
or by any of the following; (i) accident (ii) misuse or negligence (iii) overloading (iv) lack of reasonable and proper maintenance
(v) improper repair or installation (vi) unsuitable storage (vii) non-Vermeer approved alteration or modification (viii) natural
calamities (ix) vandalism (x) parts or accessories installed on Industrial Equipment which were not manufactured or installed
by Vermeer authorized dealers (xi) the elements (xii) collision or other accident.
(2) Any Industrial Equipment whose identification numbers or marks have been altered or removed or whose hour meter has
been altered or tampered with.
(3) Any Industrial Equipment which any of the required or recommended periodic inspection or services have been performed
using parts not manufactured or supplied by Vermeer or meeting Vermeer Specifications including, but without limitation,
engine tune-up parts, engine oil filters, air filters, hydraulic oil filters, and fuel filters.
(4) New Industrial Equipment delivered to the retail purchaser in which the equipment/warranty registration has not been
completed and returned to Vermeer within ten (10) days from the date of purchase.
(5) Any defect which was caused (in Vermeer’s sole judgment) by operation of the Industrial Equipment not abiding by standard
operating procedures outlined in the Operator’s Manual.
(6) Engine, battery, and tire Limited Warranties and support are the responsibility of the respective product’s manufacturer.
(7) Transportation costs, if any, of transporting to the Vermeer dealer. Freight costs, if any, of transporting replacement parts to
the Vermeer dealer.
(8) The travel time of the Vermeer dealer’s service personnel to make a repair on the retail purchaser’s site or other location
(9) In no event shall Vermeer’s liability exceed the purchase price of the product,
(10) Vermeer shall not be liable to any person under any circumstances for any incidental or consequential damages (including but
not limited to, loss of profits, out of service time) occurring for any reason at any time.
(11) Diagnostic and overtime labor premiums are not covered under this Limited Warranty Policy. Oils and fluids are not covered
under this Limited Warranty.

Introduction S925TX Mini Skid Steer
(12) Depreciation damage caused by normal wear, lack of reasonable and proper maintenance, failure to follow operating
instructions, misuse, lack of proper protection during storage.
(13) Accessory systems and electronics not of Vermeer’s manufacture are warranted only to the extent of such manufacturer’s
respective Limited Warranty if any.
(14) Down hole toolage is not covered under this warranty.
(15) Wear items which are listed by product group below:
ENVIRONMENTAL:Bearing Seals, Bearings, Belts, Brake Pads, Bolts/Torqued Parts, Chain, Clutches, Clutch Components,
Curtains, Cutter Wheels, Discharge Conveyor Belts, Fuel Filters, Hammers, Hoses, Infeed Conveyor Belts, Infeed Conveyor Chains,
Knives, Oil Filters, Pockets, Rods, Rollers, Rotor Plates, Screens, Service Items, Shear Bar/Bedknife, Sprockets, Teeth, Wear Blocks,
Wear Strips, Tips, Tip Mounts, Track Chain, Track Rollers, Rubber Tracks, Rubber Grouser Bars, Rubber Track Bands, Track
Sprockets, Track Pads, Winch Cable, Windshield Wiper Parts, Lights, Antenna.
TRACK:Base Plates, Boom Wear Items, Buckets, Cable Fingers, Conveyor Belts, Clutches, Cups, Digging Chain, Digging Rims,
Drums, End Idler, Flashings, Pins and Bushings, Pivot Rings, Plastic Wear Strips, Rooter Bands, Scraper Knives, Sprockets, Teeth,
Track Chain, Track Rollers, Trench Cleaner (Crumber), Trip Cleaners, Truck Rollers, Wear Plates.
TRENCHLESS:Brushes, Clamping Vise Parts, Dies, Drive Chuck, Earth Stakes, Fan Belts, Jaws, Leaf Chain, Lights On Light
Kits, Packing Assemblies, Rod, Rod Loader Parts, Rollers, Tooling, Track Chain, Track Guides, Track Idlers, Track Pads, Track
Sprockets, Valve Seats, Wear Bars, Wear Blocks, Water Hoses, Water Swivels, Wear Bars.
UTILITY PRODUCTS: Augers, Belts, Bearings, Booms, Brake Pads, Bucket, Bushings, Chains, Clutches, Conveyor Belts, End
Rollers, Flashings, Pins, Pivot Rings, Plow Blades, Rubber Shielding, Sprockets, Teeth, Tires, Track Chain, Track Idlers, Track
Sprockets, Trench Cleaner (Crumber).
PARTS WARRANTY:
Parts replaced in the warranty period will receive the balance of the first year New Industrial Equipment Limited Warranty, during
the first (12) months or 1000 hours, whichever comes first. Replacement parts after the original machine warranty, are warranted to
be free from defects of material for ninety (90) days or the part will be repaired or replaced, without labor coverage for removal and
reinstallation.

S925TX Mini Skid Steer Introduction
EXCLUSIONS OF WARRANTIES: EXCEPT FOR THE WARRANTIES EXPRESSLY AND SPECIFICALLY MADE
HEREIN, VERMEER MAKES NO OTHER WARRANTIES, AND ANY POSSIBLE LIABILITY OF VERMEER
HEREINUNDER IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, BUT
NOT LIMITED TO, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
VERMEER RESERVES THE RIGHT TO MODIFY, ALTER AND IMPROVE ANY PRODUCT WITHOUT INCURRING ANY
OBLIGATION TO REPLACE ANY PRODUCT PREVIOUSLY SOLD WITH SUCH MODIFICATION. NO PERSON IS
AUTHORIZED TO GIVE ANY OTHER WARRANTY, OR TO ASSUME ANY ADDITIONAL OBLIGATION ON VERMEER’S
BEHALF.
NO DEALER WARRANTY. The selling dealer makes no warranty of its own and the dealer has no authority to make any
representation or promise on behalf of Vermeer or to modify the terms or limitations of this warranty in any way.
ELECTRONIC SIGNATURES. Each of the parties hereto expressly agrees to conduct transactions by electronic means.
Accordingly, the parties agree and intend that all electronic transmissions including, without limitation, electronic signatures, shall
be considered equivalent to an original writing as provided under Iowa law, as it may be amended from time to time.
MANUFACTURED BY:
VERMEER CORPORATION
Pella, Iowa 50219 USA

This page intentionally left blank.

S925TX Mini Skid Steer Receiving and Delivery Report i
Receiving and Delivery Report
DEALER PREP
Check or perform the following:
___ Check that all optional and loose items are included with the machine.
___ Check that Operator’s Manual is cabled to machine.
___ Check air cleaner condition.
___ Check engine oil level.
___ Check engine operation.
___ Check machine lubrication.
___ Check bolts for tightness.
___ Check shield installation and condition.
___ Check that auxiliary attachment drive neutral start interlock functions.
___ Check that Ground Drive Joystick and Attachment Joystick spring-return to NEUTRAL.
___ Check that Operator Presence system functions.
___ Check that machine does not move when controls are in NEUTRAL and the engine is running at full
throttle (operator standing on foot platform).
___ Check that attachment does not tilt with key in OFF position and tilt lever pushed.
___ Check that loader arms do not lower with key in OFF position and lift lever pushed.
___ Check forward and reverse ground drive operation.
___ Check that park brake functions.
___ Check track tension.

ii Receiving and Delivery Report S925TX Mini Skid Steer
___ Check condition of all safety signs and decals.
___ Check all phases of operation.
Hydraulics
___ Check hydraulic fluid level.
___ Check hydraulic components for leaks or damage.
___ Check hydraulic controls for proper function.
Attachments
___ Check that Operator’s Manuals supplied by the attachment manufacturer are in the S925TX manual
storage box or in storage box located on the attachment. Bucket attachment instructions are contained in
this S925TX Operator’s Manual. Contact your authorized Vermeer dealer, or visit www.vermeer.com for
information on attachments authorized for use by Vermeer Corporation.
DELIVERY
Check and perform the following with the customer:
___ Review all sections of the Operator’s Manual.
___ Grease or oil all lubrication points.
Review and demonstrate with the customer the various aspects of machine operation:
___ overall explanation of how the machine works
___ machine safety
___ preparing the machine for operation
___ operating the machine

S925TX Mini Skid Steer Receiving and Delivery Report iii
DEALER/OWNER INFORMATION
dealer owner
address address
city city
state / province state / province
zip / postal code zip / postal code
country country
phone number phone number
email address email address

iv Receiving and Delivery Report S925TX Mini Skid Steer
IDENTIFICATION NUMBERS - RECORD
Machine Model Number ___________________________
Machine Serial Number ___________________________
Diesel Engine Model Number _________________________
Diesel Engine Serial Number _________________________

S925TX Mini Skid Steer Receiving and Delivery Report v
Gas Engine Model Number _________________________
Gas Engine Serial Number _________________________
MACHINE IDENTIFICATION DECAL
This decal provides easy identification of the model and 17-digit identification
number. The barcode contains the machine’s VIN number and can be scanned with
any barcode reading device.

This page intentionally left blank.

S925TX Mini Skid Steer Table of Contents vii
Table of Contents
Receiving and Delivery Report . . . . . . . . . . . . . . . . . . . . .i
Dealer Prep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii
Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii
Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii
Dealer/Owner Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Identification Numbers - Record . . . . . . . . . . . . . . . . . . . . . . . . iv
Machine Identification Decal . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Safety Messages. . . . . . . . . . . . . . . . . . . . . . . . . 10-1
Safety Symbol Explanation . . . . . . . . . . . . . . . . . . . . . . . . . .10-1
Crystalline Silica. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-5
Welding Precautions . . . . . . . . . . . . . . . . . . . . . 11-1
Welding Alert - Electronic Components . . . . . . . . . . . . . . . . . 11-1
Fuel Tank Fill. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
Diesel Fuel Engines - Sulfur Content . . . . . . . . . . . . . . . . 12-1
Gas Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-3
Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1
Emissions Quick Reference Guide . . . . . . . . . . 18-1
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-1
Engine Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-1
Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-3
Control Station. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-5
Operator Presence System . . . . . . . . . . . . . . . . . . . . . . . . . . 20-9
Park Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-9
Boom Lift/Attachment Tilt Lockout Override . . . . . . . . . . . . . 20-9
Fuses and Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-10
Diesel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-10
Gas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-11
Starting Procedure . . . . . . . . . . . . . . . . . . . . . . . 22-1
Starting the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-1
Cold Weather Starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-2
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-2
Hydraulic Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-2
Jump-Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-3
Battery Explosion - Avoid . . . . . . . . . . . . . . . . . . . . . . . . . 22-3
Battery Burns - Avoid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-3
Jump-Starting Procedure . . . . . . . . . . . . . . . . . . . . . . . . . 22-5
Shutdown Procedure . . . . . . . . . . . . . . . . . . . . . 23-1
Transporting the Machine . . . . . . . . . . . . . . . . . 30-1
Loading/Unloading the Machine . . . . . . . . . . . . . . . . . . . . . . 30-1
Loading/Unloading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-2
Driving onto Trailer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-3
Driving off Trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-5
Loading with Crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-6

viii Table of Contents S925TX Mini Skid Steer
Towing the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-6
Clean Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-9
Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-1
Operator Qualifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-1
Operator Presence Switch. . . . . . . . . . . . . . . . . . . . . . . . 40-1
Personal Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-2
Sound Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-3
Vibration Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-3
Prepare the Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-3
Locate Buried Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-4
Call Your One-Call System First. . . . . . . . . . . . . . . . . . 40-4
Look for Evidence of Underground Placement . . . . . . . 40-5
Striking a Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-5
Electricity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-5
Gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-6
Fiber Optic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-6
Jobsite Assessment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-6
Prepare the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-8
Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-8
Install/Remove. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-9
Attachment - Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-9
Attachment - Remove . . . . . . . . . . . . . . . . . . . . . . . . . . 40-11
Hydraulics - Attach/Detach . . . . . . . . . . . . . . . . . . . . . . . . . 40-12
Hydraulics - Attach . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-13
Hydraulics - Detach . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-13
Auxiliary Low Flow/Tank Port . . . . . . . . . . . . . . . . . . . . 40-14
Operating the Machine . . . . . . . . . . . . . . . . . . . . 50-1
Load Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-1
Driving Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-1
Before Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-1
While Driving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-2
Safe Operating on Slopes. . . . . . . . . . . . . . . . . . . . . . . . .50-4
Operating the Mini Skid Steer . . . . . . . . . . . . . . . . . . . . . . . .50-6
Bucket Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-7
Bucket - Install/Remove . . . . . . . . . . . . . . . . . . . . . . . . . .50-7
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-7
Moving Machine with Load . . . . . . . . . . . . . . . . . . . . . . . .50-8
Filling the Bucket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-8
Digging with the Bucket. . . . . . . . . . . . . . . . . . . . . . . . . . .50-9
Emptying the Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-10
Backdragging with the Bucket. . . . . . . . . . . . . . . . . . . . .50-10
Backfilling with the Bucket. . . . . . . . . . . . . . . . . . . . . . . .50-11
Operating with Other Vermeer-Authorized Attachments . . .50-11
Maintenance Intervals . . . . . . . . . . . . . . . . . . . . . 60-1
Safety Sign Maintenance - 100 Hours/Monthly . . . . . . . . . . .60-1
Lift Arm Support Bar - Install/Remove . . . . . . . . . . . . . . . . . .60-2
Maintenance Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60-3
Greasing the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60-3
Hourmeter - Check for Maintenance Interval . . . . . . . . . . . . .60-3
Maintenance Interval Schedule . . . . . . . . . . . . . . . . . . . . . . .60-4
Attachment Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . .60-6
Engine Fault Codes. . . . . . . . . . . . . . . . . . . . . . . 62-1
Engine Fault Codes (Gasoline Engine Only) . . . . . . . . . . . . .62-1
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

S925TX Mini Skid Steer Safety Messages 10-1
Section 10: Safety Messages
General safety messages appear in this Safety Messages section. Specific safety messages are located in
appropriate sections of the manual where a potential hazard may occur if the instructions or procedures are not
followed. Messages that are specific to an attachment will be found in the attachment manual.
A signal word “DANGER”, “WARNING”, or “CAUTION” is used with the safety alert symbol.
Safety signs with signal word “DANGER”, “WARNING”, or “CAUTION” are located near specific hazards.
SAFETY SYMBOL EXPLANATION
DANGER Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
NOTICE Indicates information considered important, but not hazard-related.
This is the safety alert symbol. This symbol is used in combination with an exclamation mark or other
symbols to alert you to the potential for death or serious injury.
This symbol indicates that at least one part of the machine is not operating correctly. Shutting down
the machine may not be necessary, but some maintenance may be required.

10-2 Safety Messages S925TX Mini Skid Steer
WARNING: Read Operator’s Manual and safety signs, and watch the operations and safety
video, before operating machine.
WARNING: Check machine before operating. Machine must be in good operating condition
and all safety equipment installed and functioning properly.
WARNING: Wear personal protection equipment. Wear close-fitting clothing and confine
long hair. Refer to “Personal Protection,” page 40-2 for additional personal protection
requirements.
WARNING: Keep spectators away.
WARNING: Engine exhaust can asphyxiate or poison resulting in death or serious injury.
Operate machine outdoors. If it is necessary to operate engine in an enclosed area, properly
vent exhaust gases.

S925TX Mini Skid Steer Safety Messages 10-3
WARNING: Use Shutdown Procedure before servicing, cleaning, repairing, or transporting
machine. Follow Shutdown Procedure, page 23-1.
WARNING: Pressurized fluid can penetrate body tissue and result in death or serious injury.
Leaks can be invisible. Keep away from any suspected leak. Relieve pressure in the
hydraulic system before searching for leaks, disconnecting hoses, or performing any work on
the system. If you must pressurize the system to find a suspected leak, use an object such as
a piece of wood or cardboard rather than your hands. When loosening a fitting where some
residual pressure may exist, slowly loosen the fitting until oil begins to leak. Wait for leaking
to stop before disconnecting the fitting. Fluid injected under the skin must be removed
immediately by a surgeon familiar with this type of injury.

10-4 Safety Messages S925TX Mini Skid Steer
WARNING: Fuel and fumes can explode and burn.
No flame. No smoking. Fill with machine level, do not overfill. Stop engine and let cool for 5
minutes. Turn fuel cap 1/4 turn, wait 10 seconds. Touch spout to tank to discharge static,
then remove cap. Keep spout in contact with tank while filling.
WARNING: Moving parts can crush. Keep hands, feet, and clothing away from power-driven
parts. Keep shields in place and properly secured.
WARNING: Hot fluid under pressure can scald.
Allow engine to cool before opening radiator cap.