Verpan Flying Chair User manual

ASSEMBLY
INSTRUCTION
Flying Chair.
Verner Panton (1964)
Please read assembly thoroughly before assembly.

The assembly and installation should be carried out by a qualied person due to the fact that wrong assembly can
lead to the furniture falling and resulting in personal injury or damage.
NB! Screws or ttings for mounting the Flying Chair are not included due to different demands depending on ceiling
type. The tting and mounting point shall withstand a load of at least 500 kg. Use screws and ttings appropriate for
the ceiling material. Please ask an expert/specialised retailer for guidance according to specic project.
Approx. 2,4 m
If oor-to-ceiling-hight is higher, you
will need to add a custom extension
construction (not included).
1. place the top ring in a properly
mounted hook (not included) in
the ceiling.
2 . Hook each rope to the seat
brackets. Make sure the buckles
are securely closed.
Recommended seat hanging height 40-50 cm

Make sure the buckles are securely closed with the nut.
A wrench can be used to fully open and close the buckle.
Make sure the nut are placed outwards, turned away from
the fabric.
Maintenance
To reduce the risk of the chair falling or personal injury, at
monthly intervals:
• Check all ttings and tighten if necessary
• Check seat, brackets, ropes and ttings for evidence of
deterioration. Do not use if anything is broken.
Cleaning
Regular cleaning is important in order to keep the upholstery
looking its best and prolong its life.
Vacuum frequently on medium power, ideally every week.
Remove non-greasy stains by carefully dabbing with a lint-free
cloth or sponge wrung out in clean hot water.
Please get acquainted with the specic guidelines for the tex-
tile in which your ying chair is made. Find an overview at www.
verpan.com
WARNING!
Flying Chair is not a swing/children furniture
Use only one person at a time
Make sure there is plenty of space around
Do not twist the ropes
Max. load 250 kg.
Do not use if any part is broken
Check that all tting are securely tightened
Check that the ropes are without signs of
wear or other deterioration
Extenstion piece
- remove for tipped position

VERPAN A/S
Egeskovvej 29
8700 Horsens
Denmark
www.verpan.com
[email protected]
DESIGNED
IN THE PAST
MADE FOR
TOMORROW