Verpan MIRROR SCULPTURES User manual

ASSEMBLY
INSTRUCTION
MIRROR SCULPTURES
wall decoration
Verner Panton (1965)

1
Content:
x1 x1
OBS! Screws not included
Mount the bracket. Please make sure to use screws and raw plugs
appropriate for the type of wall on which you wish to hang the Mirror
Sculpture.
2
Carefully remove the
protective lm from the
surface. Be careful not to
press to hard on the
surface.

3
Hang the Mirror Sculpture!
48 cm
If you want to hang the Mirror
Sculptures side by side, the vertical
distance between the bracket bottoms
must be 48 cm and the horizontal
distance between the brackets must
be 26 cm. (hang the lower rst) You are
able to adjust the Mirror Sculptures
horizontally on the bracket.
Maintenance of Mirror Sculptures
To clean the Mirror Sculpture use anti-static window polish with a soft cloth.
We recommend to polish the Mirror Sculpture right after the protective foil
has been removed. The acrylic surface is very static after removing the foil,
and will quickly attract dust.
Notice: For indoor use only!
26 cm
Give it a slight push from the
top to make it fall in to place.

VERPAN APS
EGESKOVVEJ 29
8700 HORSENS
DENMARK
[phone]
[e-mail]
WWW.VERPAN.COM
WEB: Verpan.com
FACEBOOK: verpan.com
INSTAGRAM: verpancom