Verpan System 1-2-3 User manual

ASSEMBLY
INSTRUCTIONS
SYSTEM 1 2 3 Mirror
Please read carefully before assembly

1
IMPORTANT!
Unwrap the mirror and base. Gently place the mirror
socket into the base.

2
3
Contents:
x1
Important!
After mounting the base, place the mirror on a soft sur-
face eg. at a table covered with a throw or a towel to
avoid damage to the mirror.
We recommend two people to place the mirror in horizontal position.
Tighten the foot plate to your new mirror.
x1
Turnable
x1x1
Locked
x1
4

6
Notice: Tighten screws with a PH2 screwdriver.
5
Locked
Turnable

7

Maintenance of System 1 2 3 Mirror:
Base: Wipe surfaces with a damp cloth. Grease stains can be removed with
soapy water. Do not use abrasive cloth or substances as it will scratch the surface.
Mirror: Mild detergent or window cleaner.
Notice: For indoor use only!
8

VERPAN ApS
Egeskovvej 29
8700 Horsens
Denmark
www.verpan.com
[email protected]