VersaView IDC-3120 User manual

QUICK GUIDE
IDC-3120
USB Document Camera & Visualizer
What’s In The Box
[1] IDC-3120 Camera unit
[2] USB cable
[3] Program CD. The serial
number of your software
license is printed on the CD
sleeve.
[4] Quick Guide
Connecting To The Computer
[1] Connect the camera to the
computer with the USB cable
[2] Click on “VP-EYE Document”
to launch the program.
[3] You will now be able to scan
documents, switch to
presentation mode and use
other features of the software.
Web resources
Program download / upgrade: http://www.versaview.com/download.htm
Technical support: [e-mail]
Product information: [e-mail]

Fig. 3
Fig. 4
Fig. 5
Fig. 8
Fig. 7
Fig. 6
Fig. 2
Fig. 1
Quick Installation Guide of VP-EYE Software
for the VersaView IDC-3120 Camera
[1] Have the serial number of your
software license in hand. It is printed
on the CD sleeve.
[2] Insert the CD into your computer. Or,
you may download the most current
version of the software (VP-EYE
Document) from our website at:
www.versaview.com/download.htm
[3] Unzip the downloaded file (Fig. 1)
[4] Open the VP67_xxxx folder and run
“setup.exe”. (Fig. 2)
[5] To continue the installation process
press “next”. (Fig. 3)
[6] To accept the license agreement mark
“accept” and click “Next”. (Fig. 4)
[7] Type the user name, company
name and serial number, then click
“Next”. (Fig. 5)
[8] Select the program folder, then
“Next”. (Fig. 6)
[9] Installation proceeds (Fig. 7). When
complete (Fig. 8), click “Finish”. A
“VP-EYE Document” icon appears
on the desktop (Fig. 9). Now you
are ready to begin using the
IDC-3120 camera.
After connecting the camera to the
computer with the USB cable, click on
“VP-EYE Document” to launch the
program. You will now be able to scan
documents, switch to presentation
mode and use other features of the
software.
###
Fig. 9