VEVOR DS Series User manual

Technical Support and E-Warranty Certificate https://www.vevor.com/support
DS (DOUBLE SPEED) SERIES
AIR-BLOWER
USER MANUAL
MODEL: DS-1.25HP
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
DS-1.25HP
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.

- 2 -
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed:
Warning - To reduce the risk of injury, user must read instructions
manual carefully.
This symbol, placed before a safety comment, indicates a kind of
precaution, warning, or danger. Ignoring this warning may lead to
an accident. To reduce the risk of injury, fire, or electrocution,
please always follow the recommendation shown below.
Alternating current
Correct Disposal of this product:
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this
product for environmental safe recycling.
Use Only on GFCI Protected Receptacles
WARNING:To reduce the risk of fire or electric shock ,do not use this fan with any
solid-state speed control device. Prevent sharp and hard objects from dropping
into and prevent liquid from flowing into the air-blower, Do not wash the air-blower
with liquid, you must first unplug it from power source and then wipe it with wet
cloth when you clear it, Do not draw and pull motor leads, and do not bump the
air-blower, you’d better use the air-blower between negative five and fifty
centigrade, If you let the air-blower be baked in the high temperature, motor leads,
enameled cables and heating bodies will aging and shorten its life.

- 3 -
Keep Children Away:Do not allow children to play with or around the unit, in any
way, which could result in injury.
DANGER:Improper installation of the grounding plug can result in a risk of
electric shock. If repair or replacement of the cord or plug is necessary, do not
connect the grounding wire to either flat blade terminal.
CAUTION:Use only in a 10A power circuit or more. Use only a separate circuit.
Do not operate this item in the same circuit as other electrical equipment. It must
have its own circuit. Do not modify the plug provided. If it does not fit the outlet,
have the proper outlet installed by a qualified electrician. The appliance must be
positioned so that the plug is accessible. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent, or a similarly qualified person to
avoid a hazard.
Protect Power Cord from Damage:Never operate a unit with a damaged power
cord, as this may lead to electrical or fire hazards. If the power supply cord is
damaged, it must be replace by a cord of the same type and amperage rating.
TECHNICAL PARAMETER
MODEL
DS-1.25HP
AMPS
7.8A
VOLT. & FREQ.
115V~/60HZ

- 4 -
Croquis (A).
OPERATION
Place the air-blower on a steady net
surface where children can be kept
away. This product is for use on a
nominal 115-volt circuit and has a
grounding plug that looks like the
plug illustrated in sketch (A). Use
only with inflatable products. Do not use Sketch (A) in other cases. Make sure that
the product is connected to an outlet having the same configuration as the plug.
Keep Unit Grounded:This product should be grounded. In the event of an
electrical short circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This product is equipped with a cord having a
grounding wire with an appropriate grounding plug. The plug must be plugged into
an outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
Conveyance:During conveying the air-blower, you don’t collide and shake
seriously; Please prevent sour, alkali, oil and water from entering the air-blower,
the air-blower need damp proof.
Storage:Please place it in a dry and ventilated position where it is not sour, alkali,
or corrosive gases. After using it outdoors, you should put it in a dry and ventilated
room in time. Do not let water into the air-blower.
MAINTENANCE
DANGER！Unplug or disconnect the appliance from the power supply before
servicing. When the air-blower have run about half of one year, it need to be
maintained, and you should get rid of dust、dirt and the other things on the inlet、

- 5 -
impeller and in the volute, the source of electrical supply must be disconnected
prior to the beginning of any such servicing or cleaning operation.
Clear Motor:Please replace lubricating oil on the bearing regularly. If the bearing
has worn down, you may replace it.
TROUBLESHOOTING
PROBLEM
CAUSE
Motor won’t run
1.Switch is not turned on.
2.The circuit is opened or it is poor contacted.
3.Electric capacity is damaged.
4.Choked up by hard objects.
Motor runs but
wheel makes a
scraping noise
1.The screws tightened on the vaned wheel is loose.
2.There is foreign objects in the air-blower.
Motor is unable to
run normally
1.The voltage is unstable.
2.Motor is affected with damp.
3.Electric capacity is failure.
4.The impeller is loose.

- 6 -
Printed in China
SWITCH:
LOW END—┃
OFF—O
HIGH END—┃┃
Manufacturer: FOSHAN SHUNDE HUAWEI AIR-BLOWER MFG CO., LTD.
Address: No.1 Jusheng Road, Hongxing,Ronggui Shunde, Foshan, Guangdong,
China
MADE IN CHINA

TechnicalSupport and E-Warranty Certificate
https://www.vevor.com/support