VEVOR QJ8012-18 User manual

Technical Support and E-Warranty Certificate
www.vevor.com/support
Magnetic Sweeper
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the
major top brands and doses not necessarily mean to cover all categories of tools offered by
us. You are kindly reminded to verify carefully when you are placing an order with us if you
are actually saving half in comparison with the top major brands.

- 1 -
Have product questions? Need technical support? Please feel free to
contact us:
CustomerSe[email protected]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Magnetic Sweeper

- 2 -
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS
PRODUCT.
This manual provides important information on proper operation &
maintenance. Every effort has been made to ensure the accuracy of this
manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this
product at any time without prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR
UNSAFE, DO NOT OPERATE THIS PRODUCT!
WARNING
1. KEEP AWAY FROMMATERIALS AND COMPONENTS THAT CAN BE
DAMAGED BY EXPOSURE TO MAGNETS. INDIVIDUALS WITH
PACEMAKER SHOULD CONSULT PHYSICIAN BEFORE USING THIS
PRODUCT.
Model and Parameters
Model
QJ8012-18″
QJ8012-24″
QJ8012-36″
Holds Up to
45LBS
50LBS
55LBS
Working Width
18inch
24inch
36inch
Extension Handle
support
support
support
Quick Release Load
Lever
support
support
support

- 3 -
Assembly and Use
①ALUMINIUM FRAME ②CONNECTING PLATE
③QUICK RELEASE HANDLE ④EXTENTION HANDLE
⑤2PCS WHEELS ⑥BOLT&NUT
⑦BRUSH
1.Assemble the wheels ⑤onto the bolt ⑥using nuts.
2.Assemble the extention handle ④onto hole of the connecting plate ②
with Y-bolt.
Note: Please remove the protective film on the surface of the aluminum
housing before use to avoid weakening the magnetic force.

- 4 -
OPERATION
1.Adjust the extension handle to the desired height. Roll the
Magnetic Sweeper across the desired hard surface area. It can pick
up nails, pins, bolts and any other magnetic object.
2.Lift the release lever to quickly remove the magnetic force,
allowing the adsorbed nails tofall off quickly, easily and conveniently.
Avoid injury by removing sharp nails by hand.
Safety Instructions
WARNING:
1. Please do not put it near flammable materials.
2. DO NOT SIT, STAND ON THIS ITEM, It is forbidden to carry people at
any condition.
3. Overload is strictly prohibited.
4. Don't move too fast when passing potholes areas.
5. This product is not a toy. Do not allow children to play with or near this
item.
6. Do not lift while loaded.
7. Use as intended only.
8.Inspect before every use; do not use if parts are loose or damaged.
Assembly precautions
1. Assemble only according to these instructions. Improper assembly can
create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly.
3.Keep assembly area clean and well lit.
4.Keep bystanders out of the area during assembly.
5.Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
6.Assemble on a flat, level, hard and smooth surface capable of safely
supporting a fully loaded Sweeper.

- 5 -
SAVE THESE INSTRUCTIONS
Troubleshooting Instruction
Problem
Reasons
Solution
The wheels is not
spinning freely.
Insufficient lubrication.
Add oil to lubricate the
rotating parts.
The magnetic force
drops for a while
the fine iron powder
that is adsorbed on
the surface of
alumnium frame
remove the fine iron
powder wich A brush
Maintenance
1.Avoid prolonged exposure to the sun to avoid aging.
2.Avoid the cart from cracking due to violent impact when going uphill and
downhill.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi
Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
MADE IN CHINA

Technical Support and E-Warranty Certificate
www.vevor.com/support