VEVOR PM8225D User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
MULTIMETER
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
PM8225D
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
MULTIMETER

2
Please read the instructions carefully before use.
Catalogue
Statement .............................................................................................................. 3
Summary ............................................................................................................... 3
Safety instructions ................................................................................................. 3
Safety symbol ........................................................................................................ 4
Safe operation specifications ................................................................................ 4
Instrument instructions .......................................................................................... 6
LCD symbol instructions ........................................................................................ 8
Measurement instructions ..................................................................................... 9
AC and DC voltage measurement ........................................................................ 9
mV gear voltage measurement ........................................................................... 10
Resistance/connectivity/diode/capacitance measurement .................................. 11
Temperature measurement ................................................................................. 11
Non-contact electricity verification (NCV) / Live wire detection (Live) ................. 12
Frequency / Duty ratio ......................................................................................... 13
uA current ............................................................................................................ 13
mA current ........................................................................................................... 14
A current .............................................................................................................. 15
General technical index ....................................................................................... 15
Accuracy index .................................................................................................... 16
Instrument maintenance ...................................................................................... 19
General maintenance .......................................................................................... 20
Replacement of the battery and fuse tube............................................................ 20

3
Statement
According to the Universal Copyright Convention, without permission and written
consent, no content of this manual may be reproduced in any form (including
storage and retrieval or translation into the languages of other countries or
regions). This manual is subject to change in future versions without extra notice.
Caution
The "caution" sign indicates the condition and operation that will cause
damage to the instrument or equipment.
It requires that care must be taken when performing this operation. If it is not
performed correctly or this operation step is not followed, the instrument or
equipment may be damaged. Do not continue to perform any operation
indicated by the caution sign unless these conditions are met or fully
understood.
Please read the manual carefully and pay attention to the relevant safety
warning information before using the instrument.
Summary
This instrument is a compact hand-held 6000 count digital multimeter with high
performance and high reliability. It is equipped with overload protection circuit,
which can be used to measure AC and DC voltage and current, resistance, diode,
circuit connectivity test, non-contact electricity verification and live wire detection.
AC voltage is also equipped with VFD low-pass filter, Can be used to measure
inverter voltage, filter attenuation-0.94dB@1kHz.
Safety instructions
This instrument is designed and produced in strict accordance with the Safety
Standard IEC61010, and meets the safety standard of Overvoltage Standard 600V
CAT Ⅲand Pollution level 2.
Please use the instrument as this manual, otherwise the protection function
provided by the instrument may be reduced or invalid.

4
Safety symbol
Please refer to the instructions for important safety information
AC high voltage danger
Non-recyclable
The fuse must be replaced according to the designated specification in
the manual.
Safe operation specifications
Warning
To avoid possible electric shock or physical injury, please comply with the following
specifications:
·Before using the instrument, please read the manual carefully and use the
instrument in strict accordance with it, otherwise the protection provided by the
instrument may be reduced or invalid.
·Check the shell before using the instrument. Check whether there is crack or
plastic part defect. Please carefully check the insulator near the input terminal.
·If the instrument works abnormally or is damaged, do not use it.
·It is forbidden to touch live conductors whose voltage exceeds 30V RMS AC, 42
V AC peak or 60V DC.
·The instrument should be used according to the specified measurement
category, voltage or current rating.
·When the indication of insufficient battery power is displayed, please replace the
battery in time to prevent measurement errors.
·Please comply with local and national safety specifications. Wear personal
protective equipment (approved rubber gloves, masks, flame retardant clothing,
etc.) to prevent injury caused by electric shock and arc when dangerous live
conductors are exposed.

5
·Do not use the HOLD function to measure unknown voltage. After HOLD is
turned on, the display screen will not change when different voltages are
measured.
·Measure a known voltage to determine whether the instrument operates
normally.
·When measuring, the correct function and range gear must be used.
·Do not use the instrument around explosive gas and steam or in humid
environment.
Do not use damaged probes. Check whether the insulation of the probe is
damaged, whether there is exposed metal or signs of wear. Check the continuity
of the probes.
·When measuring, please connect the neutral wire or ground wire first, and then
the live wire; when disconnecting, please cut off the live wire first, and then
disconnect the neutral wire and ground wire.
·When measuring, please hold your fingers behind the probe finger protector.
·Please disconnect the probe from the measured object before opening the back
cover of the instrument.
·Do not use the instrument in an environment that exceeds the measurement
category (CAT) rating of the lowest rated single element in the instrument, probe
or accessories.

6
Instrument instructions
①.LCD display：
It is with 4 digit 7-segment nixie tube display, 6000 counts, and
analog bar indication function.
②. Key area：
Function selection key：
Briefly press the key to switch gear function, and long press the
key for about 2 seconds to turn on or turn off VFD low-pass filter.
Attention: VFD low-pass filter only works at AC voltage gear ( ).
Maximum and minimum value key：
Briefly press the key to start the maximum or minimum value measurement, and

7
long press the key for about 2 seconds to exit the maximum or minimum value
measurement.
Relative value measurement/ Lighting key：
Briefly press the key to turn on or turn off the relative value measurement, and long
press the key for about 2 seconds to turn on or turn off the light.
Data retention / LCD backlight key：
Briefly press the key to turn on or turn off the data retention display, and long press
the key for about 2 seconds to turn on or turn off the LCD backlight.
③. Inputjack area：
jack：
The positive input terminal of 10A current measurement (connected with the red
probe).
jack：
Common input terminal for voltage, resistance, diode, capacitance,
connectivity,temperature and current measurement (connected with the black
probe).
jack：
Positive input terminal for voltage, resistance, diode, capacitance, connectivity,
temperature, live wire detection, current measurement with in 600mA (connected
with the red probe).
④. NCV sensing area
It is used for non-contact voltage verification.
⑤. Function rotary switch:
It is used to select the measurement function.

8
LCD symbol instructions
Automatic shutdown indicator Capacitance unit
Diode measurement indicator Current unit
Connectivity measurement
indicator
Voltage unit
AC indicator Data display area
Data minus indicator Display retention key
DC indicator Analog bar indication
VFD low pass filter indicator Battery low voltage indicator
Relative measurement
indicator
Contact live wire electricity
verification indicator
Positive duty ratio percentage
indicator
Non-contact electricity
verification indicator
Frequency unit Minimum value indicator
Temperature unit Maximum value indicator
Resistance unit AC high voltage indication

9
Measurement instructions
Precautions before operation:
1. Turn on the power and check whether the battery is under voltage. If " "
is displayed on the screen, you need to replace the battery before operation. If not,
please follow the steps below.
2. The " " warning symbol next to the jack of the measurement probe
indicates that the input voltage or current should not exceed the indicated value,
which is to protect the internal circuit of the instrument from damage.
3. The instrument has the function of automatic shutdown, that is, the display
shows " " and it will shut down automatically about 10 minutes after no
operation. Cancel the automatic shutdown function: press and hold the " "
key to start the machine, after hearing the beep sound for about 5 times, release
the key, and the " " is not displayed on the display screen, which can prevent
the instrument from entering the sleep state during the measurement process.
4. The backlight function turns off automatically after about 15seconds.
5. The lighting function will turn off automatically about 15 seconds after it is turned
on.
AC voltage measurement
1. Insert the red probe into the " " jack and the black probe into the
jack.
2. Turn the knob switch to the " " position, and connect the probe to the power
supply or load to be measured, and the measured value will be displayed on the
screen.