VEVOR BB-BGGJ01 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
HANGING POT RACK
USER MANUAL
BB-BGGJ01
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
Thanks for purchasing one of our products, please read carefully the assembly
instructions before the installation.
Model: BB-BGGJ01
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Hanging Pot Rack

2
PRODUCT PARAMETERS
ASSEMBLY PRECAUTIONS
1. Assembly needs to follow these instructions. Incorrect assembly can be
a hazard.
2. Wear safety goggles and heavy-duty work gloves during assembly.
3. Do not assemble when tired or under the influence of alcohol, drugs or
medication.
4. Weight capacity and other product capabilities apply to a properly and
completely assembled product only.
5. Keep the assembly area clean and well-lit.
6. Keep bystanders out of the area during assembly.
7. When installation, select a suitable and reliable wall installation, and
choose the correct fastening parts to use.
Model
Product Size（W*D*H）
Loading
Capacity
BB-BGGJ01
24" x 12"x 10-3/5"
(610x305x269mm)
55 lb (Max)

3
USE PRECAUTIONS
WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM
TIPPING:
1. This product is not a toy. Do not allow children to play with or approach
this item.
2. Use as intended only. Do not sit or stand on the product.
3. Inspect before every use. Do not use it if parts are loose or damaged.
4. Products are installed on wooden walls or reinforced walls；Do not use it
alone on the ground or on the desktop.
5. Do not exceed the listed weight capacity. Tighten all knobs securely
before applying load. Be aware of dynamic loading! The sudden load
movement may briefly create an excess load, causing product failure.

4
PARTS LIST
No.
A
B
C
D
E
Name
Base
Frame
Iron bar
M4*8
ST4*16
For wooden
Parts
Quantiy
1 PCS
2 PCS
2PCS
8 PCS
4 PCS
No.
F
G
H
I
Name
M4*30
(For wall)
Plastic plug
(For wall)
positioning
card
Hook
Parts
Quantiy
6 PCS
6 PCS
1 PCS
12 PCS

5
ASSEMBLY STEPS
Installation Mode 1
STEP1
1.Put the positioning card（H）on the
walland punch holes.
（If install on wooden material,mark
the punch position with pencil.）

6
STEP2
STEP3
2.Install the base (A) on to the frame (B) with
M4*8 screws(D).
3.Put the plastic plugs(G) into the hole first,
then install the product on the wall with
M4*30 screws (F).

7
COMPLETION
Install the Iron bars(C) onto the frame(B)
With M4*8 screws(D) and finish the installation.
(If install on wooden material, install the product on the
wall with M4*16 screws(E) without plastic plugs.）

8
Installation Mode 2
STEP1
1.Put the positioning card（H）on the
walland punch holes.
（If install on wooden material,mark
the punch position with pencil.）

9
STEP3
COMPLETION
2.Install the base (A)on to the frame (B) with M4*8
screws (D).
3.Put the plastic plugs(G) into the holes
first,then install the product on the wall with
M4*30 screws (F).