Via Seating Brisbane HD User manual

Brisbane HD
user guide
205 Vista Boulevard, Sparks, Nevada 89434 lPhone: 800-443-6614 lviaseating.com
table of contents
67CSS with optional FT control mechanism
39A height adjustable roll back arm
51A/53A adjustable height arm with 4-ways adjustable cap option
12LUM straight upright/adjustable height arm
HDR1 headrest
pg. 3
pg. 1
pg. 2
pg. 4
pg. 5
pg. 6
pg. 7
pg. 8Brisbane Ratchet back adjustment
3C/11DR and 11XDR stool control mechanism
67C control mechanism

Brisbane HD
user guide
775 331 6001
[e-mail]
www.viaseating.com
1
Knob
Seat height adjustment: Adjust
the seat height by lifting your
weight out of the chair and
pulling up on the “paddle”.
Proper seat height is realized
when the top of your legs are
somewhat parallel to the oor.
Back/recline tension adjustment:
Rotate “knob” right to increase
tilt tension. Rotate knob left to
decrease tilt tension.
Back lock adjustment (5 position):
Pull “lever” upward and shift your
weight forward or back to desired
angle. Release lever to lock. To free
oat the back, pull lever upward
until locked.
Pull up
on paddle
View is back
of chair
Knob
Knob
Pull up
on paddle
Pull up
on lever
3C/11DR and 11XDR stool control mechanism
Pull up
on lever
Unlock foot ring: press down on the
plastic “inner hub” and lift the foot
ring up to unlock it. Adjust foot ring
to desired position.
Lock foot ring: lock foot ring in
place by pressing down on “outer
foot rest” until hub is in “locked”
position.
Foot ring adjustment
35C with 11DR/11XDR
Press down
inner hub
Press down
on foot rest
Foot rest
Inner hub

775 331 6001
[e-mail]
www.viaseating.com
2
Brisbane HD
user guide
Right
knob
Seat height adjustment: Adjust
the seat height by lifting your
weight out of the chair and
pulling up on the “paddle”.
Proper seat height is realized
when the top of your legs are
somewhat parallel to the oor.
Single rotation back tilt lock
adjustment (5 position): Tilt the
seat back to desired angle and
twist the “right knob” slightly.
To unlock, twist the other way,
leaning back to unlock. The turn
is smooth. All tilt lock angles
can be reached within a single
turn of the handle.
Left
knob
Pull up
on paddle
Pull up
on paddle
67C control mechanism
Back/recline tension adjustment:
Rotate knob right to increase tilt
tension. Rotate “left knob” left to
decrease tilt tension. Rotate within
a single rotation of the knob to
achieve any of the 7 distinct back
tension levels.

3
Brisbane HD
user guide
775 331 6001
[e-mail]
www.viaseating.com
Right
knob
Left
knob
Seat height adjustment:
Adjust the seat height by
lifting your weight out of the
chair and pulling up on the
“paddle”. Proper seat height
is realized when the top
of your legs are somewhat
parallel to the oor.
Seat slider: Pull up on
“paddle” while shifting
your weight forward to
move your seat forward
or backward to move your
seat back.
Single rotation back tilt lock
adjustment (5 position): Tilt the
seat back to desired angle and
twist the “right knob” slightly.
To unlock, twist the other way,
leaning back to unlock. The turn
is smooth. All tilt lock angles
can be reached within a single
turn of the handle.
Back/recline tension
adjustment: Rotate
knob right to increase
tilt tension. Rotate “left
knob” left to decrease
tilt tension. Rotate within
a single rotation of the
knob to achieve any of
the 7 distinct back tension
levels.
Pull up
on paddle
Pull up
on paddle
Pull up
on paddle
Pull up
on paddle
67CSS with optional FT control mechanism
Forward tilt adjustment (FT): Push the “paddle” in
the down position and lean back in the chair. You
will hear a click when the forward tilt mechanism
has turned on. Sit in your normal position to use
the forward tilt feature. To turn off the forward tilt
feature, lift the paddle in the up position and lean
back in the chair. You will hear a click when the
forward tilt mechanism has turned off.
Pull up
on paddle
Pull up
on paddle

Brisbane HD
user guide
775 331 6001
[e-mail]
www.viaseating.com
4
39A height adjustable roll back arm
Roll back arm feature: while
pressing and holding the small
“button” toward the top front
on the silver circle, grasp the
arm and roll back to horizontal
position. Repeat to lift back to
upright position.
Arm height adjustment: While
pressing the “button”, use your
hand to raise and lower the arm
height.
Arm
Button Arm
Button
Arm
Button

775 331 6001
[e-mail]
www.viaseating.com
5
Brisbane HD
user guide
Additional Width Adjust-
ment(Only applies to 19AB):
Pull back on the “levers” under
the arms to unlock and extend
the arms outwards. Push forward
on the levers to lock.
To put them back to normal
simply just do the opposite.
Unlock (pull back on the lever)
and push the arms back in to
place, and lock the arms by
pushing the lever forward.
Arm height adjustment:
While lifting up on the
small “switch”, use your
hand grasping the arm
cap to raise and lower
the arm height.
51A/53A adjustable height arm with 4-ways adjustable cap option
Switch
(Lever)
Switch
(Lever)
Switch
(Lever)
Arm cap slide: Grasp
and slide arm cap
forward or backward,
sliding forward a max
of 2.5”.
Arm cap rotation: Grasp
and lift arm cap to turn left
or right, rotating a max of
15° each way.

Brisbane HD
user guide
12LUM adjustable lumbar support
Lumbar position adjustment: Turn
the “knob” clockwise (forward
toward front of chair) to increase
lumbar support, pushing the lumbar
cushion forward into the back.
Turn the knob counter-clockwise
(backward toward back of chair) to
decrease lumbar support, moving
the lumbar cushion away from the
back. This adjustment is made from
a seated position.
View is back
of chair
Knob
Knob
Clockwise = more lumbar support
Counter-clockwise = less lumbar support
775 331 6001
[e-mail]
www.viaseating.com
6

Headrest adjustment: The headrest has
2.5” of vertical adjust-ability and 45° of tilt
(tilts from 5° forward to 40° backward).
Headrest
HDR1 headrest
Front
view Side
view
Brisbane HD
user guide
775 331 6001
[e-mail]
www.viaseating.com
7

Brisbane HD
user guide
775 331 6001
[e-mail]
www.viaseating.com
8
Ratchet back adjustment: The “ratchet
back” is adjustable up and down. To
adjust the back simply just pull up or
push down on the back to the desired
hight (as you adjust the back you will
here the ratchet sound letting you
know each lock point). To unlock the
position pull the back up to its highest
point and then your able to push it
back down so it can be readjusted.
Ratchet back
Brisbane Ratchet back adjustment