Viavi Seeker D Lite User manual

Seeker D Lite
In-Home Leakage Detector
User’s Guide

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018Page 2
Notice
Every effort was made to ensure that the information in this manual was accurate at the time
of printing. However, information is subject to change without notice, and VIAVI reserves the
right to provide an addendum to this manual with information not available at the time that this
manual was created.
Copyright/Trademarks
© Copyright 2018 VIAVI Solutions Inc. All rights reserved. No part of this guide may be
reproduced or transmitted, electronically or otherwise, without written permission of the
publisher. VIAVI Solutions and the VIAVI logo are trademarks of VIAVI Solutions Inc. (“Viavi”).
All other trademarks and registered trademarks are the property of their respective owners.
Copyright release
Reproduction and distribution of this guide is authorized for US Government purposes only.
Ordering information
This guide is a product of VIAVI Technical Publications Department, issued as part of the
product. The catalog number for a published guide is Catalog Number - printed. The catalog
number for an electronic guide on USB is Catalog Number - electronic.
Terms and conditions
Specications, terms, and conditions are subject to change without notice. The provision
of hardware, services, and/or software are subject to VIAVI standard terms and conditions,
available at www.viavisolutions.com/en/terms-and-conditions.

Seeker D Lite User’s Guide
Document Num., Rev. 4May 2018 Page 3
Table of Contents
Chapter 1.............................................................................................................. 5
General Information ..................................................................................................................5
Helpful Website ......................................................................................................................5
Where to Get Technical Support ............................................................................................5
How this Manual is Organized ...............................................................................................6
Optional Software...................................................................................................................6
Conventions Used in this Manual...........................................................................................7
Precautions ............................................................................................................................7
Chapter 2.............................................................................................................. 9
Introduction................................................................................................................................9
What is the Seeker D Lite? ....................................................................................................9
Overview...........................................................................................................................9
Testing with the Seeker D Lite Source Transmitter...........................................................9
Seeker D Lite Features ........................................................................................................10
Easy Frequency Conguration .......................................................................................10
Multiple Frequency Presets ............................................................................................10
Channel Tag Compatibility ..............................................................................................10
Squelch Operation..........................................................................................................11
Source Localization ........................................................................................................ 11
Chapter 3............................................................................................................ 13
Getting to Know Your Seeker D Lite ......................................................................................13
Overview ..............................................................................................................................13
Equipment Supplied with the Seeker D Lite.........................................................................13
Replacement Parts...............................................................................................................13
Field Accessories .................................................................................................................14
A Guided Tour of Your Seeker D Lite ...................................................................................15
Front View.......................................................................................................................15
Right Side View ..............................................................................................................16
Protective Carrying Case................................................................................................17
Display Screen................................................................................................................18
About the Battery of Your Seeker D Lite ..............................................................................20
USB Charging.................................................................................................................20

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018Page 4
Chapter 4............................................................................................................ 21
Seeker D Lite Operation..........................................................................................................21
Available Conguration Settings ..........................................................................................21
PC Communications Mode.............................................................................................22
Basic Operation....................................................................................................................22
Power On/Off ..................................................................................................................22
Low Battery Warning ......................................................................................................22
RF Signal Measurement Mode.......................................................................................23
No Signal Detected ...................................................................................................24
Untagged Signal Detected ........................................................................................24
Tagged Signal Detected on High/Low Frequency .....................................................24
Cruise Mode ...................................................................................................................25
Moving Between Measurement, Cruise, and Off Modes ................................................25
Device Information & Settings..............................................................................................26
Viewing the Battery Charge Level ..................................................................................26
Low Battery Alert .......................................................................................................27
Firmware Version ......................................................................................................27
Enable/Disable Peak Hold..............................................................................................28
Selecting a Preset Frequency.........................................................................................30
Preset Frequency Toggle ..........................................................................................30
Ambient Noise Level Measurement................................................................................32
Speaker Volume Level .........................................................................................................34
Chapter 5............................................................................................................ 35
Leakage Testing.......................................................................................................................35
Before You Begin Leakage Testing......................................................................................35
Testing For Leaks.................................................................................................................35
Chapter 6............................................................................................................ 37
Appendix ..................................................................................................................................37
Specications.......................................................................................................................37
Display Messages & Error Codes ........................................................................................38
Seeker D Lite Error Codes..............................................................................................38
Limited Warranty ..................................................................................................................40

Seeker D Lite User’s Guide
Document Num., Rev. 4May 2018 Page 5
General Information
Chapter 1
Ordering Information
Where to Get Technical Support
Phone US: +1-844-GO-VIAVI or [phone]
Outside US: [phone]
Email: T[email protected]
Website: https://support.viavisolutions.com/welcome
For additional information about our products and services, contact your local VIAVI
representative or visit https://www.viavisolutions.com/en-us/how-buy.

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018Page 6
How this Manual is Organized
This manual is divided into the following chapters:
• Chapter 1, “General Information” provides contact information and describes how this
operation manual is structured.
• Chapter 2, “Seeker D Lite Introduction” introduces what the Seeker D Lite is and what it
does. This chapter discusses the practical application, connections and controls of the
Seeker D Lite. Finally, this chapter discusses the battery of the Seeker D Lite and how
to update your rmware.
• Chapter 3, “Seeker D Lite Operation” describes how to congure and operate the
Seeker D Lite.
• Chapter 4, “Leakage Testing” describes the steps needed to perform leakage testing
using the Seeker D Lite.
• Chapter 5, “Appendix” shows the technical specications of the Seeker D Lite as well as
any error codes that may appear on the display screen of the Seeker D Lite.
Optional Software
Although the Seeker D Lite comes precongured and ready to use from the factory, the
following software is required for advanced conguration of the Seeker D Lite:
• Seeker Setup is used to congure the Seeker D Lite, enabling the operator to assemble
les containing channel frequencies, squelch levels, and other settings. Users can
efciently download congurations to one or more leakage detectors.
• Leakage Analysis Workshop (LAW) is software that manages the storage and
retrieval of leakage information collected by vehicle mounted Seeker GPS systems.
Installed on a server, it receives leakage data uploads via the Internet/LAN, Wi-Fi
access point, or cellular connection. Data stored in LAW server may be displayed on
maps or as text, used to generate leakage work orders, or downloaded to other Trilithic
or third-party applications.
Data acquired by the Seeker D Lite must be manually entered into LAW, as the Seeker
D Lite does not communicate directly to LAW.

Seeker D Lite User’s Guide
Document Num., Rev. 4May 2018 Page 7
Conventions Used in this Manual
This manual has several standardized conventions for presenting information:
• Connections, menus, menu options, and user-entered text and commands appear in
bold.
• Section names, web, and e-mail addresses appear in italics.
Precautions
A CAUTION alerts you to any condition that could cause a
mechanical failure or potential loss of data.
A NOTE is information that will be of assistance to you related
to the current step or procedure.
A WARNING alerts you to any condition that could cause
personal injury.
Do not use the Seeker D Lite in any manner not
recommended by the manufacturer.
A strong electromagnetic eld may affect the measurement
accuracy of the Seeker D Lite.
Use only the battery charger supplied with the Seeker D Lite.
All spent batteries should be disposed of according to local
laws and guidelines.

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018Page 8

Seeker D Lite User’s Guide
Document Num., Rev. 4May 2018 Page 9
Introduction
Chapter 2
What is the Seeker D Lite?
Overview
The new Seeker D Lite™ is a tough, convenient, and exible leakage
test tool. The Seeker D Lite works by measuring tagged RF signals in
and around a subscriber’s premises.
This leakage detector assists in installation and troubleshooting by
verifying that the leakage within the subscriber premises is not great
enough to contribute to the cable system’s cumulative leakage index
(CLI). Leaks can also be important indicators of ingress that can hinder
communication on the return band, as well as affecting downstream
QAM channels in the LTE band.
The Seeker D Lite works in conjunction with the CT-4™ Channel
Tagger in the headend or the Seeker D Lite Source Transmitter at
the ground block. Both devices provide an uncompromising tagging
solution for active analog or digital systems and can be used to identify
and locate all RF leaks in both the Aeronautical and LTE bands.
Testing with the Seeker D Lite Source Transmitter
To overcome the high design and manufacturing cost associated with improvements in
instrument sensitivity, this system uses the Seeker D Lite Source Transmitter high output
signal source to replace the cable service at the subscriber’s ground block. The higher
levels transmitted by the Seeker D Lite Source Transmitter will increase the eld strength of
the signals radiating out of the subscriber network allowing a lower cost receiver to be used
for measurement purposes.
The Seeker D Lite Source Transmitter injects two carriers into the subscriber network, one
at 135–139 MHz and another at 611–615 MHz, supporting testing in both the Aeronautical
and LTE bands. The user may set the output level to 43 dBmV for home certication, but
also has the option to reduce the level to 23 dBmV should the subscriber network prove to
be too porous for pinpointing the location of a leak at the higher transmit level.
The Seeker D Lite provides both a visual readout of the measured levels in uV/m and a
tone proportional to signal strength. To prevent false triggering this system utilizes Trilithic’s
channel tagging technique. To provide constancy with leakage levels typically found within
the subscriber’s premise in home cert mode, the levels displayed by the Seeker D Lite have
been normalized to represent the value of a leak at typical system levels. This correlation
between measured and displayed levels will assist the technician in evaluating the severity
and recording of a leak based upon established industry practices.

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018Page 10
While in monitoring mode, the Seeker D Lite can toggle
between both the low band and high band for dual-band
leakage detection.
For the sake of this manual, the term “low band” refers to the
frequencies of 135–139 MHz and “high band” refers to the
frequencies of 610.5–615 MHz.
Seeker D Lite Features
Easy Frequency Configuration
The Seeker Setup software simplies the conguration process. Instead of going to the
factory to make hardware modications, you can use the Seeker Setup software to adjust
frequencies.
Multiple Frequency Presets
Your Seeker D Lite can be setup to operate on up to 10 different frequency presets, which
makes it easier to monitor and maintain multiple cable systems. These presets dene the
leakage monitoring frequency and, if desired, the tag detection frequency as well. You have
the option of setting up only one frequency preset for simple operation, or multiple leakage
frequencies for maintaining multiple cable systems. Frequency settings range from
135–139 MHz (low band) and 610.5–615 MHz (high band) in 12.5 kHz increments.
Channel Tag Compatibility
Compatibility with the Trilithic CT-4 channel tag devices is another feature of your Seeker
D Lite. The CT-4 can act as a traditional CT-2™ or CT-3™, and can insert Trilithic’s
proprietary tagged signals in both the aeronautical range and the near LTE range at the
same time. The CT-4 eliminates the risk of affecting any adjacent digital channels by
injecting an adjustable signal from 10–30 dBmV, targeting approximately 30 dB below the
chosen digital carriers. Channel tag values in the meter are congured using the Seeker
Setup software.

Seeker D Lite User’s Guide
Document Num., Rev. 4May 2018 Page 11
Common leakage areas are around the tap, drop cable,
ground block, CPE, and any connection of the cable to other
devices.
Squelch Operation
Squelch level is the RF signal threshold that the Seeker D Lite uses to determine the
validity of the signal. The signal “breaks squelch” when the RF leakage is greater than
the squelch level and tag qualiers are met as well. The receiver will not alarm for signals
below the squelch level.
The squelch level has a factory default of 20 µV/m. However, it can be recongured using
the Seeker Setup software.
Source Localization
The Seeker D Lite emits an audible tone to help you pinpoint the leakage source. The tone
frequency increases proportional to signal strength. As you move closer to the leak, the
frequency of the tone will increase.

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018Page 12

Seeker D Lite User’s Guide
Document Num., Rev. 4May 2018 Page 13
Getting to Know Your Seeker D Lite
Chapter 3
Overview
Before using your instrument take a few minutes to familiarize yourself with the instrument,
its basic conventions and its navigational tools. This section provides a brief overview of the
instrument’s features, buttons, and controls.
Equipment Supplied with the Seeker D Lite
The Seeker D Lite comes with the following:
• Seeker D Lite Leakage Dectector
• AC to DC Power Adapter & Battery Charger
• USB Charge & Data Cable (Mini-B to Standard-A Male)
Replacement Parts
The following replacement parts are available for the Seeker D Lite:
Part Number Description
0610169006 AC to DC Power Adapter & Battery Charger with USB Charge/Data
Cable
0610169002 AC to DC Power Adapter & Battery Charger without USB Charge/
Data Cable
2071585004 USB Charge & Data Cable
2131590000 Seeker D Lite Protective Carrying Case with Belt Clip
0170109000 Seeker D Lite Belt Clip
0090048000 Seeker D Lite Battery
To place an order, contact your local VIAVI representative, call 1-844-GO-VIAVI, or visit
https://www.viavisolutions.com/en-us/how-buy.

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018Page 14
Field Accessories
The following accessories are available for the Seeker D Lite:
Part Number Description
0610169007 Vehicle Power Adapter with USB Cable (CL-9)
0610169004 Vehicle Power Adapter without USB Cable (CL-9)
2071585004 USB Charge & Data Cable
0610169012 Euro Power Adapter
0610169013 UK Power Adapter
0610169014 Australian Power Adapter
To place an order, contact your local VIAVI representative, call 1-844-GO-VIAVI, or visit
https://www.viavisolutions.com/en-us/how-buy.

Seeker D Lite User’s Guide
Document Num., Rev. 4May 2018 Page 15
A Guided Tour of Your Seeker D Lite
Front View
ON/OFF/MODE SELECT/
BACKLIGHT button
Press and hold this button to turn the
Seeker D Lite on or off or to switch
between Measurement and Cruise
Modes. Also, when the meter is on,
press this button to activate the display’s
backlight for approximately 60 seconds.
CHANGE button
Toggles or alters the current display selection.
Also toggles frequency presets from the
measurement screen.
SELECT button
Press to advance to the next display mode.

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018Page 16
Right Side View
Mini-USB connection
The Mini-USB connection is used to connect the
charger to the Seeker D Lite and/or to connect a
PC or laptop computer to the Seeker D Lite using
the mini-USB charge / data cable.

Seeker D Lite User’s Guide
Document Num., Rev. 4May 2018 Page 17
Protective Carrying Case
The Seeker D Lite includes a protective carrying case with the following features:
• Molded form-t design that includes an impact resistant foam core with coated
ballistic nylon nish to provide maximum protection
• High-strength zipper to ensure secure closure
• Convenient belt clip for easy portability. To remove clip, turn it 90° and slide off.

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018Page 18
Display Screen
1. GPS – Not used on this meter.
2. DIST – Not used on this meter.
3. PK – Shown when the Peak Hold feature is active. When the icon is not shown, the
Peak Hold feature is turned off.
4. FREQ – Indicates the number of the currently selected frequency preset.
5. Tag – Shown when tagged signal leakage is detected.
6. NOISE – Indicates the meter is in Noise mode, showing ambient noise levels.
7. Measurement units – Indicates leakage measurement units as selected in Seeker
Setup.
8. Main display – Shows various parameters, and its function depends on the current
display mode selection.
9. Antenna – Flashes when the signal mode is selected. This is the normal mode for
leakage detection.
1 2 3 4 5
7
6
8
9
10
111213

Seeker D Lite User’s Guide
Document Num., Rev. 4May 2018 Page 19
10.Bar graph – Shows the level of various Seeker D Lite parameters, and its function
depends on the current display mode selection.
11. Battery – Flashes when the battery mode is selected. The icon will stay on when the
battery needs to be recharged.
12.Speaker – Flashes when the Speaker Volume Level mode is selected.
13.Charge – Flashes when the battery is being charged, or when the Battery Charge Level
screen is displayed.
If you see any of the following messages on your display:
• The word “Err” along with a number – Please call 1-844-GO-VIAVI or 1-844-468-
4284.
• PC – Appears when the Seeker D Lite is connected to a PC and is in PC
Communications mode.
• CH – Appears when the Seeker D Lite is connected to a battery charger and is in
Charge mode.
• LO – Appears when the Seeker D Lite battery is too low for the meter to function.

Seeker D Lite User's Guide
Document Num., Rev. 4 May 2018Page 20
About the Battery of Your Seeker D Lite
The Seeker D Lite uses a Lithium-Ion battery. The battery is charged during manufacture and
should be ready to use as long as it has not been stored for a long period of time.
Lithium-Ion batteries operate differently than Nickel-Cadmium batteries. They should be
charged daily, and should not be deeply discharged, as this could damage the battery. There is
no memory effect, so there is no concern for frequent charging.
USB Charging
You can charge the Seeker D Lite using either of the following USB charging methods:
• Connecting the Mini-USB cable and charger from an AC power source to the Seeker
D Lite. The Mini-USB charge / data cable and charger must be connected to both the
Seeker D Lite and a working power outlet before AC charging can begin.
• Connecting the Mini-USB charge / data cable from a PC or laptop computer to the
Seeker D Lite. The Mini-USB charge / data cable must be connected to both the
Seeker D Lite and a PC or laptop computer that is ON before USB charging can
begin.
The following conditions apply when charging the Seeker D Lite via USB:
• When the Seeker D Lite is off and it is charging, the device will go into background
charging and nothing will be shown on the display screen.
• If the Seeker D Lite is on when it is connected to a to a PC, laptop computer, or
working power outlet, the device will automatically turn off.
• If the Seeker D Lite is turned back on when USB charging, the Measurement mode
is disabled while the Seeker D Lite is USB charging.
• When the Seeker D Lite is on and is charging, the screen shown in the image to the
right will be displayed, the Charge icon will ash, and the
on-screen bar graph will show the charging progress.