VICOR Maxi Series User manual

375 V Input
DC-DC Converter Mod le
S
NRTL
CUS
CUS
®
Maxi Family
Maxi Family Rev 9.0 vicorpower.com
Page 1 of 15 4/2013 800 735.6200
F atur s
•DC input range: 250 – 425 V
•Isolated ouput
•Input surge withstand: 500 V for 100 ms
•DC output: 2 – 54 V
•Programmable output: 10 to 110%
•Regulation: ±0.25% no load to full load
•Efficiency: Up to 89%
• aximum operating temp: 100°C, full load
•Power density: up to 120 W per cubic inch
•Height above board: 0.43 in. (10,9 mm)
•Parallelable, with N+ fault tolerance
•Low noise ZCS/ZVS architecture
•RoHS Compliant (with F or G pin option)
Product Ov rvi w
These DC-DC converter modules use
advanced power processing, control and
packaging technologies to provide the
performance, flexibility, reliability and cost effec-
tiveness of a mature power component.
High frequency ZCS/ZVS switching provides
high power density with low noise and high
efficiency.
Applications
Off-line systems with PFC front ends, industrial
and process control, distributed power, medical,
ATE, communications, defense, aerospace
For details on proper operation please refer to the
Design Guide & Applications anual for axi,
ini, icro Family.
Parameter Rating Unit Notes
+In to –In voltage -0.5 to +525 Vdc
PC to –In voltage -0.5 to +7.0 Vdc
PR to –In voltage -0.5 to +7.0 Vdc
SC to -Out voltage -0.5 to +1.5 Vdc
-Sense to -Out voltage 1.0 Vdc
Isolation voltage
in to out 3000 Vrms Test voltage
in to base 1500 Vrms Test voltage
out to base 500 Vrms Test voltage
Operating Temperature -55 to +100 °C M-Grade
Storage Temperature -65 to +125 °C M-Grade
Pin soldering temperature 500 (260) °F (°C) <5 sec; wave solder
750 (390) °F (°C) <7 sec; hand solder
Mounting torque 5 (0.57) in-lbs (N-m) 6 each
Absolut Maximum Ratings
Output Voltag
2= 2 V
3 V 3 = 3.3 V
5= 5 V
8= 8 V
12 = 12 V
15 = 15 V
24 = 24 V
28 = 28 V
32 = 32 V
36 = 36 V
48 = 48 V
54 = 54 V
Output Pow r
Vout Pout
2 V 160 W
3.3 V 200 W, 264 W
5 V 300 W, 400 W
8 V 300 W, 400 W
12 V 400 W, 600 W
15 V 400 W, 600 W
24 V 400 W, 600 W
28 V 400 W, 600 W
32 V 600 W
36 V 400 W, 500 W, 600 W
48 V 400 W, 600 W
54 V 600 W
Part Numb ring
e.g. V375A12T600BL2
V375AB
Product Grad T mp ratur s (°C)
Grade Operating Storage
E=
- 10 to +100 - 20 to +125
C=
- 20 to +100 - 40 to +125
T=
- 40 to +100 - 40 to +125
H=
- 40 to +100 - 55 to +125
M=
- 55 to +100 - 65 to +125
Pin Styl Finish
Blank: Short Tin/Lead
L: Long Tin/Lead
S: Short Mod Mate Gold
N: Long Mod Mate Gold
F: Short RoHS Gold
G: Long RoHS Gold
Bas plat
Blank: Slotted
2: Threaded
3: Thro gh-hole
Actual size:
4.6 x 2.2 x 0.5 in
117 x 56 x 12,7 mm

Maxi Family Rev 9.0 vicorpower.com
Page 2 of 15 4/2013 800 735.6200
375 V Input
Parameter Min yp Max Unit Notes
Operating input voltage 250 375 425 Vdc
Input surge withstand 500 Vdc <100 ms
Undervoltage turn-on 242.5 247.5 Vdc
Undervoltage turn-off 204.7 212.2 Vdc
Overvoltage turn-off/on 429.2 446.3 467.5 Vdc
Disabled input current 1.1 mA PC pin low
Parameter Min yp Max Unit Notes
Output voltage setpoint 1%Vout nom Nominal input; full load; 25°C
Line regulation ±0.02 ±0.2 % Low line to high line; full load
Temperature regulation ±0.002 ±0.005 % / °C Over operating temperature range
Power sharing accuracy ±2 ±5 % 10 to 100% of full load
Programming range 10 110 %
Of nominal output voltage. For trimming below 90%
of nominal, a minimum load of 10% of maximum
rated power may be required.
+Out to –Out, +Sense to –Out — Absolute Maximum Ratings
2 V -0.5 to 3.1 Vdc xternally applied
3.3 V -0.5 to 4.7 Vdc xternally applied
5 V -0.5 to 7.0 Vdc xternally applied
8 V -0.5 to 10.9 Vdc xternally applied
12 V -0.5 to 16.1 Vdc xternally applied
15 V -0.5 to 20.0 Vdc xternally applied
24 V -0.5 to 31.7 Vdc xternally applied
28 V -0.5 to 36.9 Vdc xternally applied
32 V -0.5 to 41.9 Vdc xternally applied
36 V -0.5 to 47.1 Vdc xternally applied
48 V -0.5 to 62.9 Vdc xternally applied
54 V -0.5 to 70.2 Vdc xternally applied
MODULE INPU SPECIFICA IONS
MODULE OU PU SPECIFICA IONS
MODULE FAMILY ELECTRICAL CHARACTERISTICS
Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature,
unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate.
Note: For important information relative to applications where the converter modules are subject to continuous dynamic loading,
contact Vicor applications engineering at 800-927-9474.
Parameter Min yp Max Unit
Baseplate to sink; flat, greased surface 0.08 °C/Watt
Baseplate to sink; thermal pad (P/N 20263) 0.07 °C/Watt
Baseplate to ambient 4.9 °C/Watt
Baseplate to ambient; 1000 LFM 1.1 °C/Watt
Thermal capacity 165 Watt-sec/°C
HERMAL RESIS ANCE AND CAPACI Y

Maxi Family Rev 9.0 vicorpower.com
Page 3 of 15 4/2013 800 735.6200
375 V Input
Parameter Min Ty Max Unit Notes
PRIMARY SIDE (PC = Primary Control; PR = Parallel)
PC bias voltage 5.50 5.75 6.00 Vdc PC current = 1.0 mA
current limit 1.5 2.1 3.0 mA PC voltage = 5.5 V During normal operation
PC module disable 2.3 2.6 2.9 Vdc Switch must be able to sink ≥4 mA. See Fig. 2
PC module enable delay 4 7 ms
PC module alarm 0.5 Vavg UV, OV, OT, module fault. See Figs. 3 and 5
PC resistance 0.9 1.0 1.1 MΩSee Fig. 3, converter off or fault mode
PR emitter amplitude 5.7 5.9 6.1 Volts PR load >30 Ω, <30 pF
PR emitter current 150 mA
PR receiver impedance 375 500 625 Ω25°C
PR receiver threshold 2.4 2.5 2.6 Volts Minimum pulse width: 20 ns
PR drive capability 12 modules Without PR buffer amplifier
SECONDARY SIDE (SC = Secondary Control)
SC bandgap voltage 1.21 1.23 1.25 Vdc Referenced to –Sense
SC resistance 990 1000 1010 Ω
SC capacitance 0.033 µF
SC module alarm 0 Vdc With open trim; referenced to –Sense. See Fig. 7
Parameter Min Ty Max Unit Notes
Remote sense (total drop) 0.5 Vdc 0.25 V per leg (sense leads must be connected to
respective, output terminals)
Isolation test voltage (in to out)* 3000 Vrms Complies with reinforced insulation requirements
Isolation test voltage (in to base)* 1500 Vrms Complies with basic insulation requirements
Isolation test voltage (out to base)* 500 Vrms Complies with operational insulation requirements
Isolation resistance 10 MΩin to out, in to baseplate, out to baseplate
Weight ( , C, T grade) 6.5 7.3 8.1 ounces
(184.3) (207.5) (230.7) (grams)
Weight (H, M grade) 7.4 8.2 9.0 ounces
(209.3) (232.5) (255.7) (grams)
Temperature limiting 100 115 °C See Figs. 3 and 5. Do not operate coverter >100C.
Agency approvals cURus, cTÜVus, C UL60950-1, N60950-1, CSA60950-1, I C60950-1.
With appropriate fuse in series with the +Input
MODULE CONTROL SPECIFICATIONS
MODULE GENERAL SPECIFICATIONS
* Isolation test voltage, 1 minute or less.
Not :
Specifications are subject to change without notice.
MODULE FAMILY ELECTRICAL CHARACTERISTICS (CONT.)

Maxi Family Rev 9.0 vicorpower.com
Page 4 of 15 4/2013 800 735.6200
375 V Input
MODULE SPECIFIC OPERA ING SPECIFICA IONS
Parameter Min yp Max Unit Notes
fficiency 79.4 81.5 % Nominal input; full load; 25°C
Ripple and noise 120 150 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 4.14 4.3 4.46 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 4.9 7.8 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 80 Amps
Current limit 81.6 92 104 Amps Output voltage 95% of nominal
Short circuit current 56 92 104 Amps Output voltage <250 mV
3.3 Vout, 264 W (e.g. V375A3V3C264BL)
Parameter Min yp Max Unit Notes
fficiency 72 73.7 % Nominal input; full load; 25°C
Ripple and noise 200 250 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 2.7 2.8 2.9 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 8.4 11 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 80 Amps
Current limit 81.6 92 108 Amps Output voltage 95% of nominal
Short circuit current 56 92 108 Amps Output voltage <250 mV
2 Vout, 160 W (e.g. V375A2C160BL)
Parameter Min yp Max Unit Notes
fficiency 78 78.9 % Nominal input; full load; 25°C
Ripple and noise 60 75 mV p-p; Nominal input; full load; 20MHz bandwidth
Output OVP setpoint 4.14 4.3 4.46 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 7.9 9.1 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 60.6 Amps
Current limit 61.8 69.7 81.9 Amps Output voltage 95% of nominal
Short circuit current 42.4 69.7 81.9 Amps Output voltage <250 mV
3.3 Vout, 200 W (e.g. V375A3V3C200BL)
Parameter Min yp Max Unit Notes
fficiency 80 83 % Nominal input; full load; 25°C
Ripple and noise 120 150 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 6.26 6.49 6.72 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 6.6 9 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 80 Amps
Current limit 81.6 92 108 Amps Output voltage 95% of nominal
Short circuit current 56 97 108 Amps Output voltage <250 mV
5 Vout, 400 W (e.g. V375A5C400BL)

Maxi Family Rev 9.0 vicorpower.com
Page 5 of 15 4/2013 800 735.6200
375 V Input
Parameter Min yp Max Unit Notes
fficiency 82 83.3 % Nominal input; full load; 25°C
Ripple and noise 80 100 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 6.03 6.25 6.47 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 8.8 10.2 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 60 Amps
Current limit 61.2 69 81 Amps Output voltage 95% of nominal
Short circuit current 42 69 81 Amps Output voltage <250 mV
5 Vout, 300 W (e.g. V375A5C300BL)
MODULE SPECIFIC OPERA ING SPECIFICA IONS (CON .)
Parameter Min yp Max Unit Notes
fficiency 81.5 86 % Nominal input; full load; 25°C
Ripple and noise 320 400 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 13.7 14.3 14.9 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 8.7 13 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 50 Amps
Current limit 51 57.5 67.5 Amps Output voltage 95% of nominal
Short circuit current 35 57.5 67.5 Amps Output voltage <250 mV
12 Vout, 600 W (e.g. V375A12C600BL)
Parameter Min yp Max Unit Notes
fficiency 82 83.1 % Nominal input; full load; 25°C
Ripple and noise 220 275 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 9.36 9.7 10.1 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 9.3 10.8 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Output Current 0 37.5 Amps
Current limit 38.2 43.1 50.7 Amps Output voltage 95% of nominal
Short circuit current 26.2 43.1 50.7 Amps Output voltage <250 mV
8 Vout, 300 W (e.g. V375A8C300BL)
Parameter Min yp Max Unit Notes
fficiency 81.6 82.8 % Nominal input; full load; 25°C
Ripple and noise 288 360 mV p-p; Nominal input; full load; 20MHz bandwidth
Output OVP setpoint 9.55 9.9 10.3 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 17.9 19 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 50 Amps
Current limit 51 57.5 67.5 Amps Output voltage 95% of nominal
Short circuit current 35 57.5 67.5 Amps Output voltage <250 mV
8 Vout, 400 W (e.g. V375A8C400BL)

Maxi Family Rev 9.0 vicorpower.com
Page 6 of 15 4/2013 800 735.6200
375 V Input
MODULE SPECIFIC OPERA ING SPECIFICA IONS (CON .)
Parameter Min yp Max Unit Notes
fficiency 85.5 87.5 % Nominal input; full load; 25°C
Ripple and noise 80 100 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 27.1 28.1 29.1 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 9.3 10.9 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 25 Amps
Current limit 25.5 28.8 33.8 Amps Output voltage 95% of nominal
Short circuit current 17.5 28.8 37.5 Amps Output voltage <250 mV
24 Vout, 600 W (e.g. V375A24C600BL)
Parameter Min yp Max Unit Notes
fficiency 84 85.3 % Nominal input; full load; 25°C
Ripple and noise 300 375 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 17.1 17.8 18.5 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 12.3 14 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 26.67 Amps
Current limit 27.2 30.7 36.1 Amps Output voltage 95% of nominal
Short circuit current 18.6 30.7 36.1 Amps Output voltage <250 mV
15 Vout, 400 W (e.g. V375A15C400BL)
Parameter Min yp Max Unit Notes
fficiency 85.5 87.5 % Nominal input; full load; 25°C
Ripple and noise 240 300 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 17.1 17.8 18.5 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 9 12 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 40 Amps
Current limit 40.8 46 52 Amps Output voltage 95% of nominal
Short circuit current 28 46 52 Amps Output voltage <250 mV
15 Vout, 600 W (e.g. V375A15C600BL)
Parameter Min yp Max Unit Notes
fficiency 85 86.6 % Nominal input; full load; 25°C
Ripple and noise 240 300 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 13.7 14.3 14.9 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 12.5 14.5 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 33.33 Amps
Current limit 33.9 38.3 45 Amps Output voltage 95% of nominal
Short circuit current 23.3 38.3 45 Amps Output voltage <250 mV
12 Vout, 400 W (e.g. V375A12C400BL)

Maxi Family Rev 9.0 vicorpower.com
Page 7 of 15 4/2013 800 735.6200
375 V Input
MODULE SPECIFIC OPERA ING SPECIFICA IONS (CON .)
Parameter Min yp Max Unit Notes
fficiency 86.8 87.8 % Nominal input; full load; 25°C
Ripple and noise 120 150 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 31.5 32.7 33.9 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 9.5 10.2 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 21.43 Amps
Current limit 21.8 24.7 28.9 Amps Output voltage 95% of nominal
Short circuit current 14 24.7 28.9 Amps Output voltage <250 mV
28 Vout, 600 W (e.g. V375A28C600BL)
Parameter Min yp Max Unit Notes
fficiency 86.5 88 % Nominal input; full load; 25°C
Ripple and noise 160 200 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 31.5 32.7 33.9 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 10.7 12 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 14.29 Amps
Current limit 14.5 16.4 19.4 Amps Output voltage 95% of nominal
Short circuit current 10 16.4 19.4 Amps Output voltage <250 mV
28 Vout, 400 W (e.g. V375A28C400BL)
Parameter Min yp Max Unit Notes
fficiency 87.1 88.1 % Nominal input; full load; 25°C
Ripple and noise 168 210 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 35.9 37.3 38.7 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 11.6 12.1 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 18.75 Amps
Current limit 19.1 21.6 24.5 Amps Output voltage 95% of nominal
Short circuit current 13.1 21.6 24.5 Amps Output voltage <250 mV
32 Vout, 600 W (e.g. V375A32C600BL)
Parameter Min yp Max Unit Notes
fficiency 86.5 87.7 % Nominal input; full load; 25°C
Ripple and noise 120 150 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 27.1 28.1 29.1 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 13.2 15 Watts No load
Load regulation ±0 ±0.2 % No load to full load; nominal input
Load current 0 16.67 Amps
Current limit 17 19.2 22.6 Amps Output voltage 95% of nominal
Short circuit current 5 19.2 22.6 Amps Output voltage <250 mV
24 Vout, 400 W (e.g. V375A24C400BL)

Maxi Family Rev 9.0 vicorpower.com
Page 8 of 15 4/2013 800 735.6200
375 V Input
Parameter Min yp Max Unit Notes
fficiency 87.6 88.6 % Nominal input; full load; 25°C
Ripple and noise 150 188 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 40.4 41.9 43.4 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 12.4 13.2 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 11.11 Amps
Current limit 11.3 12.8 15 Amps Output voltage 95% of nominal
Short circuit current 7.77 12.8 15 Amps Output voltage <250 mV
36 Vout, 400 W (e.g. V375A36C400BL)
MODULE SPECIFIC OPERA ING SPECIFICA IONS (CON .)
Parameter Min yp Max Unit Notes
fficiency 87 88.5 % Nominal input; full load; 25°C
Ripple and noise 80 100 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 53.2 55.2 57.2 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 13.5 15.0 Watts No load
Load regulation ±0.02 ±0.25 % No load to full load; nominal input
Load current 0 12.5 Amps
Current limit 12.7 14.4 16.3 Amps Output voltage 95% of nominal
Short circuit current 8 14.4 16.3 Amps Output voltage <250 mV
48 Vout, 600 W (e.g. V375A48C600BL)
Parameter Min yp Max Unit Notes
fficiency 85.8 88 % Nominal input; full load; 25°C
Ripple and noise 200 250 mV p-p; Nominal input; full load; 20MHz bandwidth
Output OVP setpoint 40.4 41.9 43.4 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 14.5 16 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 13.89 Amps
Current limit 14.5 16 18 Amps Output voltage 95% of nominal
Short circuit current 8.5 16 18 Amps Output voltage <250 mV
36 Vout, 500 W (e.g. V375A36C500BL)
Parameter Min yp Max Unit Notes
fficiency 86.8 88.6 % Nominal input; full load; 25°C
Ripple and noise 216 270 mV p-p; Nominal input; full load; 20MHz bandwidth
Output OVP setpoint 40.4 41.9 43.4 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 12.6 14.7 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 16.67 Amps
Current limit 17 19.2 22.6 Amps Output voltage 95% of nominal
Short circuit current 11.6 19.2 22.6 Amps Output voltage <250 mV
36 Vout, 600 W (e.g. V375A36C600BL)

Maxi Family Rev 9.0 vicorpower.com
Page 9 of 15 4/2013 800 735.6200
375 V Input
MODULE SPECIFIC OPERA ING SPECIFICA IONS (CON .)
Parameter Min yp Max Unit Notes
fficiency 87.7 89.6 % Nominal input; full load; 25°C
Ripple and noise 160 200 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 60.4 62.6 64.8 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 6 12 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 11.11 Amps
Current limit 11.3 12.8 15 Amps Output voltage 95% of nominal
Short circuit current 7.77 12.8 15 Amps Output voltage <250 mV
54 Vout, 600 W (e.g. V375A54C600BL)
Parameter Min yp Max Unit Notes
fficiency 87 88.3 % Nominal input; full load; 25°C
Ripple and noise 200 250 mV p-p; Nominal input; full load; 20 MHz bandwidth
Output OVP setpoint 53.7 55.7 57.7 Volts 25°C; recycle input voltage or PC to restart (>100 ms off)
Dissipation, standby 14.2 16.3 Watts No load
Load regulation ±0.02 ±0.2 % No load to full load; nominal input
Load current 0 8.33 Amps
Current limit 8.49 9.58 11.3 Amps Output voltage 95% of nominal
Short circuit current 5.83 9.58 11.3 Amps Output voltage <250 mV
48 Vout, 400 W (e.g. V375A48C400BL)

Maxi Family Rev 9.0 vicorpower.com
Page 10 of 15 4/2013 800 735.6200
375 V Input
+IN
PC
PR
–IN
+OUT
+S
SC
–S
–OUT
C3*
4.7nF
C2*
4.7nF
For C1 – C5, keep leads and connections short.
C5*
4.7nF
C4*
4.7nF
F1*
C1*
0.2 F
Figure 1 —Basic module operatio requires fusi g, grou di g, bypassi g capacitors.
* See Maxi, Mi i, Micro Desig Guide.
BASIC MODULE OPERATION
Compr h nsiv Onlin Application Information
The Design Guide and Applications anual includes:
• Application circuits
• Design requirements
• E C considerations
• Current sharing in power arrays
• Thermal performance information
• Recommended soldering methods
• Accessory modules – filtering, rectification, front-ends
• ounting options
...and more.
Also at vicorpower.com
• PowerBench online configurators
• Over 20 Application Notes
• Online calculators – thermal, trimming, hold-up
• PDF data sheets for ALL Vicor products
CLICK HERE TO VIEW
DESIGN GUIDE