Vicoustic Mega Bass Trap VMT User manual

EN
EN
Mega Bass Trap VMT
Horizontal Installation Manual

EN

EN
MATERIAL NEEDED
Included
Not Included
Drill
Level Measuring Tape
Screwdriver Pencil
x1
Mega Bass Trap VMT

EN
1Remove the steel plate from the Mega Bass Trap top cover.
Remove the at metal plate from the base of the Mega Bass Trap.
2

EN
4
A
B
C
Attach the metal plate that you unscrewed from the Mega Bass Trap cover, to the mdf
base plate.
3
Use the supplied gauge to mark the xation points.

EN
5Use the previously marked point indicated in the diagram as a reference to mark the
following points.
D
E
6Repeat this step 3x, until you complete 3 holes in the same direction.
D
E

EN
7
C
B
A
C
B
A
8Please check if the points are marked correctly, before drilling the holes in the wall.
Repeat the process to make the mark in the adjacent wall.

EN
9
D
E
C
B
A
10
Conrm that you have the points marked according to diagram.
!

EN
11
12 Repeat the same steps to make the markings in the another wall.
If necessary, open the holes in the marked places, and apply the wall plugs. Fix
the prole indicated, with screws suitable for the wall where you are making the
installation.

EN
13
14
After installing the second prole, x the protection bars with the unpainted screws
provided.
If necessary, open the holes in the marked places, and apply the wall plugs. Fix the side
covers, with screws suitable for the wall where you are making the installation.