VICUT 4560 User manual
ANHUI WILLIAM CNC TECHNOLOGY CO.,LTD
www.CNCVICUT.com
FLATBED CUTTER
INSTALLATION
MANUAL
ANHUI WILLIAM CNC TECHNOLOGY CO.,LTD
www.CNCVICUT.com
Step 1: Preparation before unpacking
A. electric screw driver B. one computer
Step 2: Open the wooden package box with the electric screw driver.
Step 3: Take Out the stand of the flatbed cutter（no stand for 4560 model）
ANHUI WILLIAM CNC TECHNOLOGY CO.,LTD
www.CNCVICUT.com
Step 4: Take out the package boxes. One is for Spare Parts, Another one is
for the screws.(no screw box for 4560 model)
Step 5: Install the stand (only for 6090 model with stand)
ANHUI WILLIAM CNC TECHNOLOGY CO.,LTD
www.CNCVICUT.com
Step 6: Put the working table on the machine stand connected by the
screw. (only for 6090 model with stand)
Step 7: Connect the Vacuum Pump to the machine
ANHUI WILLIAM CNC TECHNOLOGY CO.,LTD
www.CNCVICUT.com
Step 8: Put the cutting blade and creasing tool on the machine
How to Replacing the blade
Step1: Push the blade to the bottom of the blade holder.
Step2: Adjust the blade tip to suitable length by rotating
“Adjustment depth knobs” and then tighten the lock.
Step3: Press the push-pin to remove the blade from the blade holder when
replacing blade.
Thank you for your reference,
if you have any questions,
please contact the local
dealer or VICUT customer
service center.
Thank you again !
From VICUT
Anhui William CNC Technology Co., Ltd
FLATBED
CUTTER
This manual suits for next models
1
Other VICUT Plotter manuals
