ANHUI WILLIAM CNC TECHNOLOGY CO.,LTD
www.CNCVICUT.com
Step 2 Open box 2,take out beam and two vertical shaft
bracket,use four “SHCS” each side to combine them then take
out two machine foot combine vertical shaft bracket with four
“SHCS”
(notice the direction of machine foot)
Step 3 Take out two paper shaft bracket and combine with
vertical shaft bracket by screws then fix the two basket shaft
bracket on the paper shaft by screws.
Step 4 Take out machine main body and take off four side
machine mat at bottom to let four screws out, put the four
screws through the hole on the paper shaft bracket and use
machine mat to fix tight in the back.
