Videsur VSP24W-25L User manual

NO：VSP24W-25L
2.4GHzWireless Mobile AV receiver
MPEG-4 Recorder
User Manual

Caution
This product is controlled by microprocessor;
improper use may cause the machine stop operating.
Please stop and restart the machine
If battery is not fully charged, this may cause serious
system error when recording and transferring video
files
Do not open the cover！
2
It may cause electrical shock。
Touch DC converter parts may cause electrical shock
In order to prevent improper operation of DC converter, please read User Manual carefully.
Caution
Prevent this product from water and liquid, Otherwise, electrical shock and fire danger may occur
For your safety, pleases use only the DC converter provided.
（The manufacturer will not responsible for any losses caused by DC converter not provided by
the manufacturer）
Important
Please only use the socket match with DC converter. Use of improper socket may cause
electrical and fire damager
Please firmly plug the DC converter into the AC socket panel

3
SafetyNotice
Internalrechargeablebattery
λDo not use damaged battery or charger
λDo not charge battery over the specified time period
λFirst use or the battery has not been used for past several month, please recharge the battery
before use.
In order to protect your battery, please fully charge your battery before you use. The battery
must be fully discharge it before you charge it again.
λOver charge and over discharge will shorten the life of battery
λIf the usage period of fully charged battery is shorten than new battery, You need to change
your battery.。
λBattery is consumable item, its life will be shorten from the time it is being used.。
λ
Don’t touch the DC converter with any conductors e.g. rings etc..

ProductPackages
★
Any changes of the above items in the packages will not inform in advance.
Please recycle and re-use above item as far as possible。
4

MainParts
Mainmachine
5

Connect to AC socket（Charge battery purpose）
Before use this product, please use the provided DC adapter for charging purpose.
Please connect DC adapter plug into DC 5V socket
Please firmly plug in the DC into the AC socket
The battery life indicator will turn to Red when it is charging
The light will turn to green when is fully charged.
λBefore use this product, please charge the battery for 4 hours in order to fully charge the battery.
λCharge period ≥4hours （after fully discharge）
Important notice
During recording video or transferring files, system error may occur in case of inadequate battery.
Therefore, please check battery level before use this product. If needed, please connect to DC adapter
and fully charge the battery before use.
6

Mode selection
Press to power on
Wireless receiving mode
■Use wireless receiving mode to receive video signal
1. Push receiving mode key to R (Wireless receiver)Mode, Receiver screen will display
Wireless video recorder, Press Key. Select your desired channel
CH1: 2414MHz; CH2: 2432MHz; CH3: 2450MHz; CH4: 2468MHz.
2. Press REC Key to record the video and audio media. After recording, the file will be
Kept at following file folder: multimedia menu\DCIM\100COACH
3. Press recording REC button, to stop recording.
λAfter recording , the file will be kept at file folder : Multimedia
menu\DCIM\100COACH。
λThe file will be named as PICT001，PICT002 as MPEG file in AVI format.。
λIt is unable to reset volume during recording。
λIf memory is full, recording will stop。
7

Selectusemode
Multimediaplayermode
■Use multimedia player file
1. Turn the receiver mode to “P” mode, the machine will display the the Main menu of the Multimedia
mode. Enter into the multimedia explorer, there are four file folders (MP3,VIDEO,DCIM,PHOTO）
2. Press /Key to select function menu, Press to enter the function menu.
3. /：move up and down to select file folder, Press : to access the file.
+/– ：move to the selected file ，Press : to play the file, Press ■stop play/back
to previous file。
4. During play mode, use +/– to adjust voice volume
5.when play a file completed，it will play next file
8

Connecttoexternalequipment
Use AV Cord to connect to external equipment
9
■check video/audio/voice through TV
1. Connect AV connector to AV OUT plug of the product, connect 3RCAplug connect to TV set(Yellow:
Video; White: Audio(L); Red : Audio (R)
2. Turn TV to AV mode (external input), to receive signal from wireless receiver.
Monitor will display operating instruction.
How to view video file, please refer to P.13 for details
■Use wire cord to record AV file
1. Connect AV cord to AV IN plug of this product, connect 3RCAplug connect to TV set
(Yellow: Video; White: Audio (L); Red: Audio (R)
2. Turn receiver mode to P (multimedia receiver) mode, select recording function to record video from
external equipment.
3. Resolution setting Turn receiver mode to P (multimedia receiver) mode, select recording menu, press
MENU Key to enter Into Resolution, AV Quality sub-menu. Press+/Key to select he function you
intended to set. Press Key enter into function menu, Press +/– key to select setting, Press
MENU key to select either 320×240”or“640×480”resolution，Factory default is “640×480”

Connect to external equipment
Use USB connect to external USB equipment
■ This product support OTG function, it can link with U disk or
removable hard disk for accessing and storage.
■ Delect and Copy function：
If SD card is inserted, System will set default to SD card, if no SD card is or insert the SD card after the
product is power on, the default memory card need to set in the memory. When select copy a file, you
need to set memory in the menu in advance. In player mode but have only one “memory”. It cannot
precede copy process.
1. When memory is set to memory, enter into multimedia player will have four options
(MP3,VIDEO,DCIM,PHOTO）. When memory is set to U disk, enter into multimedia player will
display is the menu of main memory.
2. Enter into multimedia player, select the file or play option. Press MENU key will display “delete, copy
to” operation, select /key to select your intended option.
3. Turn to “copy to” option, press to enter, will display “memory” “main memory” or “U disk” three
option. Select. +/–appropriate memory，Press Key to complete copy process. The memories are able
to proceed copy each others.
4．Press Key to display” all, present and cancel” three options. Press +/– key to select you option, press
Key, it will display “Yes” or “No” options. Select “Yes” to delete, “No” to exist delete operating.
10

Connecttoexternalequipment
Connect USB connect to your PC
■open the bottom cover of the receiver，use USB cord to connect with the precut using USB 2.0
interface.
If no correct procedure, please do not disconnect the USB cord. This will prevent risks of data lost
of m or receiver.
syste
.
11

Functionsetting
■Turn the receiver mode to P(Multimedia player)Mode, Main menu will appear.
1.Press/to select Setup function，Press Key to confirm to display following sub-menu: Time &
date setting, press voice setting，language setting, memory setting，Display，Logo，contrast setting，
default setting, system upgrade, auto shut down and format.
2.Pess +/– to shift to“Storage”menu，press key enter, 3 options to be selected, storage, main
memory, U disk(Nand Flash, MSDC，U Disk）,press +/– key select storage location, use to
confirm, press ■to exist。
⇐:When SD is inserted，system default is SD card，If no SD is inserted, you have to select storage
media.
3.Press +/– to shift to (Logo) function menu，press to enter to access initial screen..
4“DATE/TIME”SETTING：
a).Press +/– to shift to Date & Time menu press to enter 3 sub function: Date Format, Date
Setting, Time Setting, press ■to exit.
b).Press +/– to shift to“Date Format” submenu，press to enter “YY/MMM/DD” or DD/MM/YY,
base on your need and use +/– key to select. Press to exist.
c).Press +/– to shift to “Date setting” submenu，Press to enter，press/to move to desired
location，press again +/– to turn to desired location and to make change. After change press
to confirm and exit。
d). press +/– to shift to “time setting” sub-menu, press to enter. Press/to move to desired
change location, press again +/– to desired location to change the setting. After change, Press
to confirm and exit。
5.Press+/– shift to Deep function menu, press to enter，This function
menu is to, control the on/off of Key tone, Press +/– to select，Press to confirm and exit。
12

6.Press +/– to Brightness sub-menu，Press to enter, press /to change contrast, use to
confirm and exit.
7.press +/– to shift to Format sub-menu, Press to enter，three options available：Storage, Main
memory Disk 盤(Nand Flash, MSDC, U Disk).Use +/–use，to selec desired option. Select
Yes or No for each option. Press +/– to select. Press to, confirm and exit. When error exists,
select “yes” can erase internal data and make the machine recover to initial status.
8. Press +/–key to “Language” menu, press to enter, Inside there are English/China 2 other
language for you to select. Press to confirm and exit.
9.Press +/– shift to “Power Off” menu，press to enter,
This function is operate when machine is idle. Setting time option: 1 mins, 5mins, No auto-power off.
Change and press +/– to confirm and exit.
10.Press +/- to shift to “Display” menu，press to enter. There are three
options available : LCD,PAL,NTSC，LCD display function directly。Make
connection with “receiver” and “TV set”, PAL，NTSC are TV mode, please
Select suitable TV mode. Enter to TV mode to select and confirm connection
to TV set or not. Press +/- to TV set. At this moment, every operation steps can be
Displayed on TV screen. If no connection to TV set, screen is Black in color. Press ■
Key to exit operation.
11.press +/– to Default sub-menu. Press to enter, press +/– to enter. Select“Yes”or “No”, If “No”,
machine will keep existing setting. If select “NO” default, machine will back to default setting, but
data will not be changed.
13

Inquiry
Inquiry can check information e.g. [Storage capacity [memory card capacity] [U disk
Capacity] [version]
1.Turn the receive mode to P (multimedia receiver)mode, enter inquiry menu，press+/– to select you
desired information. Press to enter.
項目 解釋
Storage capacity Display the used and free capacity of the receiver/player
Display used and free capacity of SD card (Only when you insert a SD
card. Otherwise, it will display “Card not in!”
Main memory
show used and free capacity of U disk(Only when you use a U-disk.
Otherwise, it will display “Card not in!”
U disk
Version Show the latest version of this machine
14

Productspecification
Product specification
Item Item Product specification
Receiver channel 4CH
CH1: 2414MHz; CH2: 2432MHz;
Receiver channel
15
CH3: 2450MHz; CH4: 2468MHz.
Wireless receiver
Db level -90dB
Frequency property FM 2.4MHz
LCD 2.5 TFT 882x228 Trans.ective LCD
Video out mode NTSC / PAL
Video mode NTSC / PAL
Resolution 640*480 / 320*240
Compressed video format MPEG-AVI Max 30pfs
video
Play file format MPEG-1/MPEG-4/AVI/ASF/ADPCM
Frequency range 20HZ-20KHz
Output channel Stereo
Earphone output 左 20MW+右 20mW [16O](Max volume)
Play file format MP3/MP2.5
Audio
Speaker 1W
picture file format JPG/JPEG
Flash memory 64MB
storage
Storage media SD/MMC/SX/U disk/HDD
IBM-PC Windows 98SE.ME.2000 和 XP
Serial bus USB 2.0; USB OTG1.1
Disk file format FAT32
Opertating system
supported
Language Chinese/English
AS adapter DC 5V 2A
Battery
Internal battery Li-ion battery 2500Mah
Wireless recorder ≥4.5 hrs
Standby time
player ≥7hrs