ViewSonic VT2216-L User manual

IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specic languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”
VT1602-L/VT2216-L
LCD TV display
User Guide
Model No. VS15770/VS15772

Contents
Compliance Information..........................................................................................i
Declaration of RoHS2 Compliance.........................................................................ii
Copyright Information .............................................................................................iii
Product Registration ...............................................................................................iii
Important Safety Instructions.................................................................................iv
Getting Started................................................................... 1
Package Contents....................................................................................................1
Installing the LCD TV...............................................................................................2
Installing the Stand.............................................................................................2
Disconnecting the Stand ....................................................................................2
Mounting ViewSonic LCD TV to the wall............................................................3
Wall Mount Kit Specications (VESA)................................................................4
Front View of the Product .......................................................................................5
Rear View of the Product ........................................................................................6
Connecting the LCD TV...........................................................................................7
Cable System or VHF/UHF Antenna System.....................................................7
Cable System and VHF/UHF Antenna System..................................................7
HD Cable Box/HD Satellite Box .........................................................................7
Personal Computer ............................................................................................10
Using the TV Features....................................................... 11
Remote Control and TV Controls ...........................................................................11
Inserting Remote Control Batteries....................................................................11
Remote Control and TV Controls.......................................................................11
Operation..................................................................................................................14
Other Information .............................................................. 31
Troubleshooting.......................................................................................................31
Specications...........................................................................................................33
Customer Support ...................................................................................................34
Limited Warranty......................................................................................................35
Mexico Limited Warranty ........................................................................................36

i
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Warning:Youarecautionedthatchangesormodicationsnotexpresslyapprovedbytheparty
responsible for compliance could void your authority to operate the equipment.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic
Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted municipal
waste, but use the return and collection systems according to local law.
If the batteries, accumulators and button cells included with this equipment, display the
chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of
more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
ENERGY STAR Information:
•ENERGYSTARisasetofpower-savingguidelinesissuedbytheU.S.EnvironmentalProtection
Agency(EPA).
ENERGYSTARisajointprogramoftheU.S.EnvironmentalProtectionAgencyandtheU.S.
Department of Energy helping us all save money and protect the environment through energy
efcientproductsandpractices.
Thepowerconsumptionwillbechanged,iftheTVsetuptobeanothermodeexceptfordefaultas-
shippedtelevisioncongurationandsettings.
ThepowerconsumptionmayexceedenergyconsumptionbeyondthelimitsrequiredforENERGY
STARqualicationwhentheoptionalfunctionusedortheoperationmodechangedinuse.
Dolby Trademark Information:
ManufacturedunderlicensefromDolbyLaboratories.Dolbyandthedouble-Dsymbol
are trademarks of Dolby Laboratories.
Compliance Information

ii
Declaration of RoHS2 Compliance
ThisproducthasbeendesignedandmanufacturedincompliancewithDirective2011/65/EUofthe
European Parliament and the Council on restriction of the use of certain hazardous substances in
electricalandelectronicequipment(RoHS2Directive)andisdeemedtocomplywiththemaximum
concentrationvaluesissuedbytheEuropeanTechnicalAdaptationCommittee(TAC)asshown
below:
Substance Proposed Maximum
Concentration Actual Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6+) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers
(PBDE)
0.1% < 0.1%
CertaincomponentsofproductsasstatedaboveareexemptedundertheAnnexIIIoftheRoHS2
Directives as noted below:
Examples of exempted components are:
1. Mercuryincoldcathodeuorescentlampsandexternalelectrodeuorescentlamps(CCFLand
EEFL) for special purposes not exceeding (per lamp):
(1)Shortlength(≦500 mm): maximum 3.5 mg per lamp.
(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.
(3) Long length (＞1,500 mm): maximum 13 mg per lamp.
2. Lead in glass of cathode ray tubes.
3. Leadinglassofuorescenttubesnotexceeding0.2%byweight.
4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.
5. Copper alloy containing up to 4% lead by weight.
6. Leadinhighmeltingtemperaturetypesolders(i.e.lead-basedalloyscontaining85%byweight
or more lead).
7. Electrical and electronic components containing lead in a glass or ceramic other than dielectric
ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.

iii
Copyright Information
Copyright©ViewSonicCorporation,2014.Allrightsreserved.
ViewSonicandthethreebirdslogoareregisteredtrademarksofViewSonicCorporation.
Disclaimer:ViewSonicCorporationshallnotbeliablefortechnicaloreditorialerrorsoromissions
contained herein; nor for incidental or consequential damages resulting from furnishing this material,
or the performance or use of this product.
Intheinterestofcontinuingproductimprovement,ViewSonicCorporationreservestherightto
changeproductspecicationswithoutnotice.Informationinthisdocumentmaychangewithout
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
withoutpriorwrittenpermissionfromViewSonicCorporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com.
For Your Records
Product Name: VT1602-L/VT2216-L
ViewSonicLCDTV
Model Number: VS15770/VS15772
Document Number: VT1602-L/VT2216-L_UG_ENGRev.1B05-08-14
Serial Number: _________________________________
Purchase Date: _________________________________
Product disposal at end of product life
ViewSonicrespectstheenvironmentandiscommittedtoworkingandlivinggreen.Thankyoufor
beingpartofSmarter,GreenerComputing.PleasevisitViewSonicwebsitetolearnmore.
USA&Canada:http://www.viewsonic.com/company/green/recycle-program/
Europe:http://www.viewsoniceurope.com/uk/support/recycling-information/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

iv
Important Safety Instructions
Dangerous Voltage:Thelightningashwith
arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence
of dangerous voltage within the inside of the
productthatmaybesufcientleveltoconstitute
a risk of electric shock to persons.
Instruction: The exclamation point within
an equilateral triangle is intended to alert the
user to the presence of important operating
and servicing instructions in the literature
accompanying the appliance.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8.Donotinstallnearanyheatsourcessuch
as radiators, heat registers, stoves, or other
apparatus(includingampliers)thatproduce
heat.
9. Do not defeat the safety purpose of the
polarizedorgrounding-typeplug.Apolarized
plughastwobladeswithonewiderthantheother.A
grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided
foryoursafety.Iftheprovidedplugdoesnottinto
your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11.Onlyuseattachments/accessoriesspecied
by the manufacturer.
12.Useonlywiththecart,stand,tripod,bracket,
ortablespeciedbythemanufacturer,or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combinationtoavoidinjuryfromtip-over.
13.Unplugthisapparatusduringlightningstormsorwhen
unused for long periods of time.
14.Referallservicingtoqualiedservicepersonnel.
Servicingisrequiredwhentheapparatushasbeen
damagedinanyway,suchaspower-supplycordorplug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
USE
AC power Cord
KeepthefollowingguidelinestoprotecttheACpowercord
frombeingdamaged.IftheACpowercordisdamaged,it
mayresultinareoranelectricshock.Stopusingitandask
yourdealerorViewSonicservicecentertoexchangeit.
•Do not place the TV where the power cord is subject to
wear or abuse.
•Do not pinch, bend, or twist the cord excessively.
•Thecorelinesmaybebaredandcut,causingashort-
circuit,andresultinginareoranelectricshock.
•Do not convert or damage the power
cord.
•Avoidpowercordbeingrolledoveror
rested upon.
•When the power cord is plugged in, do
not move the TV.
•Keep the power cord away from heat sources.
•WhenyoudisconnecttheACpowercord,disconnectit
fromthewalloutletrst.
•When disconnecting the power cord, grasp the plug instead
of pulling the power cord.
•UseonlyanoriginalViewSonicACpowercord,notother
brands.
•DonotusethesuppliedACpowercordonanyother
equipment.
•The main plug is used as the disconnect device, the
disconnect devices shall remain readily operable.
Wall outlet
Insert the plug fully into the outlet. If it is loose,
do not use it. Doing so may cause arcing and
resultinare.Contactyourelectricianto
change the outlet.
Wiring
Foryoursafety,besuretounplugtheAC
power cord when connecting cables.
Take care not to trip on the cables. It may cause damage to
the TV set.
Electric shock
DonottouchtheACpowercordortheTVwith
awethand.Ifyouplug/unplugtheACpower
cord from the TV with a wet hand, it may
cause electric shock.
Lightning storms
During a lightning storm, unplug the TV from the wall outlet
and disconnect the antenna to prevent damage to the TV.
When not in use
If you will not be using the TV set for long periods of time,
theTVsetshouldbedisconnectedfromtheACpoweroutlet
to prevent power line surges. The TV set is not disconnected
fromtheACpowersourcewhentheTVsetisswitchedoff.
TodisconnecttheTVsetcompletely,unplugfromtheAC
power outlet.
Overloading
This TV set is designed to operate on a 120V
ACsupplyonly.
If there are too many appliances connected to
thesameACpoweroutlet,itcouldresultina
reoranelectricshock.

v
Optional equipment
If optional equipment is to be installed, leave some space
between optional equipment and the TV set. Picture
distortion and/or noisy sound may occur if the TV set is
positioned in close proximity to any equipment emitting
electromagnetic radiation.
Small accessories
Keep small accessories in a safe place where children are
unable to reach.
Magnetic inuence
This TV contains a strong magnet in the speaker unit that
generatesamagneticeld.Keepanyitemssusceptibleto
magneticeldsawayfromthespeaker.
Sound
If you hear snapping or popping sound comes
from the TV continuously or frequently while
the TV is operating, unplug the TV and consult
your dealer or service technician. It is normal
for some TVs to make occasional snapping or
popping sounds, particularly when being turned
on or off.
Use in outdoor
This TV is not designed for outdoors
installation. Do not expose the TV to rain,
asitmayresultinareoranelectric
shock.Also,donotexposetheTVtodirect
sunlight, as it may heat up and become
damaged.
Vehicle, ships and other vessels
Do not install this TV in a vehicle.
Car accidents may cause the TV to fall down
and cause injury.
Do not install this TV in a ship or vessel.
If the TV is exposed to seawater, it may cause
areordamagetheTV.
Medical institutions
Do not place this TV in a place where medical equipment is
in use. It may cause the medical equipment to malfunction.
Volume adjustment
•Adjustthevolumetoavoiddisturbingyourneighbors.
Soundcarrieseasilyatnight.Therefore,wesuggestyou
close the windows or use headphones.
•When using headphones, adjust the volume to appropriate
levels, or hearing damage may result.
ANTENNAS
Outdoor antenna grounding
If an outdoor antenna is installed, follow the precautions
below.
Do not install the outdoor antenna system near of overhead
power lines or other electric light or power circuits, or where
it can come in contact with such power lines or circuits.
WHENINSTALLINGANOUTDOORANTENNASYSTEM,
EXTREMECARESHOULDBETAKENTOKEEPFROM
CONTACTINGSUCHPOWERLINESORCIRCUITSAS
CONTACTWITHTHEMISALMOSTINVARIABLYFATAL.
Be sure the antenna system is grounded so that it can
providesomeprotectionagainstvoltagesurgesandbuilt-up
static charges.
Section810oftheNationalElectricalCode(NEC)inthe
U.S.A.andSection54oftheCanadianElectricalCode
in Canada provides information with in regard to proper
grounding of the mast and supporting structure, grounding
ofthelead-inwiretoanantennadischargeunit,sizeof
grounding conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements for the
grounding electrode.
Antenna grounding according to the National Electrical
Code, ANS/NFPAFPA 70
Antenna
Antenna discharge
unit
Grounding conductors
Power service grounding
electrode system
Ground clamps
Electric service
equipment
Ground clamp
CLEANING
Cleaning the AC power plug
UnplugtheACpowerplugandcleanit
regularly. If the plug is covered with dust
and gathers moisture, its insulation may
deteriorateandresultinare.
Cleaning the screen surface/ cabinet of the TV set
WhencleaningthisTV,unplugtheAC
power cord. If not, it may result in electric
shock.Useadrysoftclothtocleanthe
cabinet of the TV. To remove dust near
the screen, wipe it gently with a soft cloth.
Stubbornstainsmaybe
removed with a cloth slightly dampened with a solution of
mild soap and warm water. Never use strong solvents such
as thinner or benzine for cleaning. If using a chemically
pretreated cloth, please follow the instruction provided on
the package. The ventilation holes can accumulate dust over
time.
To ensure proper ventilation, we recommend you to remove
the dust periodically (once a month) using a vacuum cleaner,
while the LCD TV is powered off.
Disclaimer
Somechemicalcleanershavebeenreportedtodamagethe
screenand/orcaseoftheLCDTV.ViewSonicwillnotbe
liable for damage resulting from use of these cleaners.
CARRYING THE TV
Carry the TV as instructed
To prevent dropping the TV and causing serious injury, you
must follow these guidelines:
•Disconnect all cables before carrying the TV.
•Carrying the large size TV requires at least two or three
people.
•When you carry the TV, place your hands as illustrated and
hold it securely. Do not put stress on the LCD panel and
the frame around the screen.
•When carrying the TV, do not subject it to shocks, vibration,
or excessive force.

vi
•When lifting or moving the TV, hold it securely from the
bottom. Place your palm directly under the panel.
VENTILATION
SlotsandopeningsinTVareprovidedfor
ventilation.
To ensure reliable operation of the TV and
to protect it from overheating, be sure these
openings are not blocked or covered.
The TV may accumulate dust and get dirty if
proper ventilation is not provided. For proper
ventilation, follow the following guidelines:
•Never install the TV face up, down or
sideways.
•Never install the TV turned over or upside
down.
•Never cover the slots and openings with a
cloth or other materials.
•Never block the slots and openings by
placing the TV on a bed, sofa, rug or other
similar surface.
•NeverplacetheTVinaconnedspace,suchasa
bookcaseorbuilt-incabinet,unlessproperventilationis
provided.
Leave some space around the TV set as shown below.
Otherwise,air-circulationmaybeinadequateandcause
overheating,whichmaycauseareordamagetotheTV
set.
Installed with stand
4 inches
(10 cm)
4 inches
(10 cm)
2.375 inche
s
(6.03 cm)
11.875 inches
(30.16 cm)
Leave at least this space around the set.
MOISTURE
Moisture and ammable objects
•Keep the product away from moisture. Do not
expose this appliance to rain or moisture. Do
notplaceobjectslledwithliquids,suchas
vases, on the TV.
•Donotusepower-lineoperatedTVsets
near water, such as in places like a bathtub,
washbowl, kitchen sink, laundry tub, a wet
basement, or near a swimming pool, etc. It
maycausereorelectricshock.
•Do not let this TV get wet. Never spill liquid
of any kind on the TV. If water penetrates
into the product, unplug the power cord and
contactViewSonic.
•Do not operate the TV when wet. It may result in electric
shock or damage to the TV.
•Topreventre,keepammableobjectsoropename(e.g.
candles) away from the TV.
INSTALLATION
Placement
TheTVshouldbeinstallednearaneasilyaccessibleAC
power outlet.
Observe the following to prevent the TV from
falling from the stand or wall mount.
•Place the TV on a stable, level surface.
•Do not hang anything on the TV. Do not allow
children to climb on the TV. Do not install the
TV in places subject to extreme temperature, such as in
direct sunlight, near a radiator, or heating vent. If the TV is
exposed to extreme temperature, the TV may overheat and
cause deformation of the enclosure or cause malfunction.
•Do not install the TV in a place exposed to direct air
conditioning.
•If the TV is installed in such a location,
moisture may condense inside and may
cause a malfunction.
•Do not place the TV in hot, oily, humid or
excessively dusty places.
•Do not install the TV where insects may
enter.
•Do not install the TV where it may be exposed to
mechanical vibration.
•Do not install the TV in a location where it may spear up,
such as on or behind a pillar, or where you might bump
your head on it. It may cause injury.
•WARNING–Toreducetheriskofreorelectricshock,do
not expose this apparatus to rain or moisture.
•The apparatus shall not be exposed to dripping or
splashingandthatnoobjectslledwithliquid,suchas
vases shall be placed on the apparatus.
•Class I apparatus that construction shall be connected to a
mains socket outlet with a protective earthing connection.
•Batteries shall not be exposed to excessive heat such as
sunshine,reorthelike.
Preventing the TV from toppling over
To prevent the TV from toppling over, secure the TV to a wall
or stand.
Placement for watching
WesuggestyoutowatchtheTVatadistanceof3-7times
that of the screen height, and not in excessive brightness.
It is easy to cause eye fatigue if you watch TV for too long
or in a dark room. To obtain clear picture, do not expose the
screentodirectilluminationorsunlight.Usespotlighting
directed down from the ceiling if you can.

vii
LCD SCREEN
•AlthoughtheLCDscreenismadewithhighprecision
technology and has effective pixels of 99.99% or more,
black dots or bright points or light (red, blue, or green) may
appear constantly on the LCD screen. This is a structural
property of the LCD panel and is not a malfunction.
•TheLCDscreenismadewithhigh-precisiontechnology.
To achieve a high level of performance and picture
quality, this TV’s backlight setting is set to maximize
the brightness of the TV. However, uneven brightness
may be observed when the LCD TV is viewed in a dark
environment without an input source or a blank screen.
This is a normal condition, not a malfunction of the TV. To
improve this condition, change the Picture mode, Backlight
setting,enabletheLightSensor,orturnonthePower
management.
•AvoidexposingtheLCDscreensurfacetodirectsunlight.It
is likely to damage the LCD panel.
•Do not push or scratch the LCD screen, or place objects on
top of the TV. The image may be uneven or the LCD panel
may be damaged.
•If the TV is used in a cold place, a smear may occur in the
picture or the picture may become dark. It is not caused
by a failure. This condition will improve as the temperature
rises.
•When still pictures are displayed continuously, ghosting
may occur. It should disappear after a short period of time.
•The screen and cabinet get warm when the TV is in use.
This is a normal condition.
•Sprayinginsectrepellentwithvolatilematerialonthe
screen will cause damage.
•Do not make prolonged contact with rubber or plastic
material.
Broken pieces
Do not throw anything at the TV.
Doing so may break the screen glass and
cause serious injury.
IfthesurfaceoftheTVcracks,unplugtheAC
power cord before touching the TV. Otherwise
electric shock may result.
Handling of broken glass and liquid crystal leakage
If the LCD panel gets damaged, crystalline liquid leakage
may occur, or scattered broken glass may result. Do not
touch broken glass or crystalline liquid which is toxic, with
bare hands as cuts, poisoning or skin irritation may occur.
Alsodonotglassfragmentsorleakedcrystallineliquidget
intoyoureyesormouth.Shouldeithercontactedyoureyes
or mouth, rinse the contacted area thoroughly with water and
consult your doctor.
SERVICING
Do not attempt to repair the TV yourself,
since opening the cabinet may expose you
to dangerous voltage or other hazards.
Askqualiedservicepersonneltodothe
servicing for your TV.
Replacement parts
When replacement parts are required, be sure the
servicetechniciancertiesinwritingthathe/shehasused
replacementpartsspeciedbythemanufacturerthathave
thesamecharacteristicsastheoriginalparts.Unauthorized
substitutionsmaycauseare,anelectricshockorother
hazards.
Safety check
UponcompletionofrepairstotheTV,asktheservice
techniciantoperformroutinesafetychecks(asspecied
by the manufacturer) to determine that the TV is safe for
operating, and to so certify.
AskaqualiedservicetechniciantodisposeoftheTV.

1
Package Contents
Please make sure the following items are included with your LCD TV.
If any items are missing, please contact your dealer.
or
LCD TV
(VT2216-L )
Stand /Screw x 2pcs /
screw driver
Remote Control with batteries
or
LCD TV
(VT1602-L )
Stand /Screw x 3pcs /
screw driver
Power Cord
(for US model)
ViewSonic CD
(User Guide)
ViewSonic Quick Start Guide
The photos of the accessories are for reference only, the color of the remote control, the type
of power cord are variable based on the actual models.
Getting Started

Getting Started
2
Installing the LCD TV
Installing the Stand
Figure 1 Figure 2 Figure 3
(VT2216-L )
(VT1602-L )
1. Carefully place the TV screen side down on a cushioned surface to protect the screen from
damage. (see Figure 1)
2. Attach the foot stand and secure it with the included screws. Please fasten with a cross screw
driver. (see Figure 2)
3. Stand the TV up. (see Figure 3)
Disconnecting the Stand
1. Carefully place the TV screen side down on a cushioned surface to protect the screen from
damage. (see Figure 1)
2. Remove the screws and detach the stand from the TV. (see Figure 2)
Figure 1 Figure 2

Getting Started
3
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to
the wall, please consider the following guidelines:
•Read the Important Safety Instructions, at the start of this manual.
•Do not install in a moist or wet environment. This equipment is intended for indoor use.
•Do notinstallnearheatsource,orstrongmagneticelds.
•Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.
•Before attaching the wall mount plate to the back cover, ensure the product is working.
•IfyourLCDTVisalreadysetupforfree-standingoperation,youneedtorstremovethestand
before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
•Disconnect the power and any other cables that might hinder moving the LCD TV.
•Set the LCD TV on a table or work surface, placing the screen face down on a towel or woolen
blanket to protect the screen surface from damage while installing plate.
•Before installing the LCD TV on the wall, ensure you have recorded the product serial number on
page (i) of the User Guide, as you will need the serial number to request service should there be
a service need.
•Install the wall mount plate to the LCD TV using screws NO LONGER than 12mm, as longer
screws found in universal (non-ViewSonic) wall mount kits may damage the power supply
causing the unit to fail. The wall-mount screw type is M4 x L12.
•Mount the wall mount bracket to the wall ensuring use of proper screws to support the
installation. Ensure there is at least 3cm of space surrounding any air-vents of your LCD TV to
allow adequate cooling during operation.
•Hang the LCD TV wall mount plate to the wall mount bracket, completing installation.
Enjoy your ViewSonic LCD TV!

Getting Started
4
Wall Mount Kit Specications (VESA)
When attaching to other building materials, please contact your nearest dealer.
A
B
D
C
Product Family inch VESA Spec. (A x B) Standard Screw
(C x D)
Quantity
LCD TV 22 100 x 100 mm M4 x L12 4
LCD TV 16 75 x 75 mm M4 x L12 4
•ViewSonic provides the standard dimensions for wall mount kits as shown in the table above.
•Tondtheperfectmount,pleasebrowsewww.viewsonic.comorcallourserviceteam:
United States 1-800-688-6688, Canada 1-866-463-4775, Europe [phone].
•When purchasing our wall mount kit, a detailed install manual and all parts necessary for assembly
are provided.
•Do not use the screws that longer than the standard dimension, as they may cause damage to the
inside of the TV set.

Getting Started
5
Front View of the Product
2
3
1
4
5
6
Item Icon Description
1
LED Indicator Blue indicates power on. Red indicates standby mode.
Remote Control
Receiver Receive IR signals from the remote control.
2 Volume
VOL - Decrease the volume.
Move to the left or adjust the setting on the OSD menu.
VOL + Increase the volume.
Move to the right or adjust the setting on the OSD menu.
3 Channel Select CH - Return to the previous channel.
CH + Advance to the next channel.
4 Menu MENU Turn the on-screen display (OSD) menu on / off.
5 Input INPUT Select the input source.
Enter the submenu.
6 Power Turn the power on from standby mode. Touch it again to
return to standby mode.

Getting Started
6
Rear View of the Product
87652 3 4
1
TV
IN
HDMI IN EARPHONE
OUT
10
9
11
PrPbY/
VIDEO IN
AUDIO IN
R L PC/VGA IN PC/VGA
AUDIO
IN
DIGITAL
AUDIO
OUT
USB
Item Description
1 Power (AC input) Connect to the AC input power source.
2 USB ConnecttoUSBdevices,suchasUSBashdrive.
3 Digital Audio out. jack Connects to the audio jack on the digital/standard 5.1 audio
system
4 Audio input (left/ right) Connect to the corresponding audio connectors on your A/V
device
5 Composite Video input Connect to the composite video output connectors on your A/V
equipment
6 YPbPr signal input Connect to the YPbPr output of A/V device
7 VGA signal input Connect to a PC VGA port.
8PC/VGA Audio input Connect to a PC line / audio port.
9 HDMI inputs Connect to the HDMI outputs of A/V devices.
10 TV Input Jack Connect to an antenna or cable TV
11 Earphone Jack
Connect to earphones. By connecting the earphones, you can
listen to the sound from the TV through the earphones.
j If you connect the earphones, the TV speakers will be muted.

Getting Started
7
Connecting the LCD TV
Cable System or VHF/UHF Antenna System
Enjoythehigh-denitionandstandard-denitiondigitalprogrammingalongwithstandard-denition
analog programming.
☼
•This TV is capable of receiving unscrambled digital programming for both cable and external VHF/
UHF antenna.
•We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial cable
(not supplied) to ensure the best picture quality.
Cable or VHF/UHF
75-ohm coaxial cable Rear side of the TV
VHF/UHF/CABLE input
Cable System and VHF/UHF Antenna System
Use an optional A-B RF switch (not supplied) to switch between the cable and antenna
programming, as shown below.
Cable
Antenna
Rear side of the TV
VHF/UHF/CABLE input
A-B RF switch
☼
•Remember to set the TV/CATV setting in the TV menu to Air or Cable for the type you choose.
HD Cable Box/HD Satellite Box
Youcanalsoenjoyhigh-denitionprogrammingbysubscribingtoahigh-denitioncableserviceor
ahigh-denitionsatelliteservice.Fortheoptimumpicturequality,besuretoconnectthisdeviceto
your TV via the HDMI or component video (with audio) input on the rear side of your LCD TV.
HDMI Connection
HDMI cable
COMPONENT
VIDEO OUT
Pr Y
VIDEO
DVI-HDTV OUT
HDMI OUT OUT
IN
AUDIO
L
R
Pb
LINE OUT
TV
IN
HDMI IN EARPHONE
OUT
HDMI cable
HD cable box /
HD satellite box
CATV / Satellite antenna cable
Rear side of the TV

Getting Started
8
DVI Connection
TV
IN
HDMI IN EARPHONE
OUT
PrPb PC/VGA IN PC/VGA
AUDIO
IN
COMPONENT
VIDEO OUT
Pr Y
VIDEO
DVI-HDTV OUT
HDMI OUT OUT
IN
AUDIO
L
R
Pb
LINE OUT
Audio cable
DVI-to-HDMI cable
Rear side of the TV
DVI-to-HDMI cable
CATV / Satellite
antenna cable
DVI-to-HDMI adapter Audio cable
HD cable box /
HD satellite box
☼
•For DVI connection, connect the HDMI jack (with DVI-to-HDMI cable or adapter), and connect the
audio jack to the AUDIO IN jacks of PC Audio input.
HDMI Timing Reference Chart
No. Mode HDMI DVI
1 VGA60 (640x480) V V
2 SVGA60 (800x600) V V
3 XGA60 (1024x768) V V
4 SXGA60 (1280x1024) V V
5 WXGA60 (1360x768) NA NA
6 1280 x 800 NA NA
7 1440 x 900 NA NA
8 1680 x 1050 NA NA
9 1920 x 1080 V V
10 480i60 V V
11 576i50 V V
12 480P60 V V
13 576P50 V V
14 720P50 V V
15 720P60 V V
16 1080I50 V V
17 1080I60 V V
18 1080P50 V V
19 1080P60 V V
20 1080P24 NA NA
21 1080P30 NA NA

Getting Started
9
YPbPr or Component Connection
COMPONENT
VIDEO OUT
Pr Y
VIDEO
DVI-HDTV OUT
HDMI OUT OUT
IN
AUDIO
L
R
Pb
LINE OUT
PrPbY/
VIDEO IN
AUDIO IN
R L PC/VGA IN PC/VGA
AUDIO
IN
DIGITAL
AUDIO
OUT
Audio cable
Component
cable
Rear side of the TV
Component cable
CATV / Satellite
antenna cable
Audio cable
HD cable box /
HD satellite box
☼
•YPbPr provides better quality than the AV connection.
AV Connection
COMPONENT
VIDEO OUT
Pr Y
VIDEO
DVI-HDTV OUT
HDMI OUT OUT
IN
AUDIO
L
R
Pb
LINE OUT
PrPbY/
VIDEO IN
AUDIO IN
R L PC/VGA IN PC/VGA
AUDIO
IN
DIGITAL
AUDIO
OUT
AV cable
AV cable
CATV / Satellite
antenna cable
HD cable box /
HD satellite box

Getting Started
10
Programming your Cable or Satellite Box remote
Refer to the user manual from your service provider to determine the setting.
If it requires:
•3 digits, please try “566”, “565”, “556”, or “688”. It usually works with DISHNetwork.
•4 digits, please try “0054”. It usually works with Cox.
•5-digits, please try “11454”, “11054”, or “10690”. It usually works with DIRECTV.
Personal Computer
Use the LCD TV as the monitor of your computer.
PrPbY/
VIDEO IN
AUDIO IN
R L PC/VGA IN PC/VGA
AUDIO
IN
DIGITAL
AUDIO
OUT
USB
TV
IN
HDMI IN EARPHONE
OUT
Audio cable (stereo mini plugs)
VGA 15 Pin cable
Rear side of the TV
☼
•Connect the PC IN jack to the PC using a 15-pin cable and audio cable.
PC Timing Reference Chart
No. VGA Timing Panel FullHD (1920 x 1080) Support
Mode Resolution H sync
(kHz)
V sync
(Hz)
Pixel clock
(MHz)
Polarity Support
1 IBM VGA 720 x 400 31.47 70.09 28.32 N/P V
2 VESA DMT 640 x 480 31.5 59.94 25.175 N/N V
3 VESA DMT 800 x 600 37.88 60.32 40 P/P V
4 VESA DMT 1024 x 768 48.36 60 65 N/N V
5VESA DMT 1280 x 768 47.77 59.8 79.5 N/P V
6 VESA DMT 1280 x 800 49.7 59.81 83.5 N/P NA
7 VESA DMT 1280 x 1024 63.98 60.02 108 P/P V
8 VESA DMT 1360 x 768 47.71 60.01 85.5 P/P NA
9 VESA DMT 1440 x 900 55.94 59.89 106.5 N/P NA
10 VESA DMT 1680 x 1050 65.29 59.95 146.25 N/P NA
11 CEA 1920 x 1080 67.5 60 148.5 P/P V
☼
•This TV PC VGA input does not support interlaced signals.

11
Remote Control and TV Controls
Inserting Remote Control Batteries
1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3. Reattach the battery cover.
CAUTION
•OnlyusethespeciedAAAbatteries.
•Do not mix new and old batteries. This may result in creaking or leakage, which may pose a risk of
reorleadtopersonalinjury.
•Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may result in
leakage,whichmayposeariskofreorleadtopersonalinjury.
•Dispose of the battery in accordance with local laws and regulations.
•Keep the batteries away from children or pets.
•When the remote control will not to be used for an extended period, remove the batteries.
Remote Control and TV Controls
Touch keys located at the front side
of the TV operate the same as these
buttons on the remote control.
Button Description
1 POWER Press this button to turn the power on from
standby mode. Press it again to return to
standby mode.
2 TV Changes source to TV Tuner.
3 INFO Press to display the current state of the display.
1
2
4
12
11
15
16
13
17
18
19
5
6
7
8
9
10
3
20
14
Using the TV Features