ViewSonic PerfectFlat PF77 User manual

17" (16.0" viewable) OptiSync Monitor
ViewSonic does it again with the introduction of the PF77 monitor. Designed
with the highly innovative OptiSync technology, the ViewSonic PF77 17" (16.0
viewable) monitor incorporates both analog and digital inputs to provide you
the ultimate compatibility with the latest digital computer technology. This will
drastically optimize your investment in this state-of-the-art ViewSonic CRT display.
The PF77 is capable of delivering resolutions up to 1600 x 1200 and also features
PerfectFlat screen for edge-to-edge distortion-free images with minimal eye fatigue.
Its super fine aperture grille design displays astonishing vivid colors. For those who
demand uncompromising screen images, the OptiSync PF77 takes your visual
computing experience beyond digital.
PF77 Monitor
ViewSonic
®
Professional Series
• OptiSync
™
technology
OptiSync is a revolutionary new multiple input
"sync" technology that features precise display
synchronization to any analog or digital computer
signal. ViewSonic's OptiSync technology provides
exceptional picture quality for today and for
tomorrow's most advanced digital requirements.
•0.25mm aperture grille
•1,600 x 1,200 maximum resolution
With analog input, displays a maximum
resolution of 1,600 x 1,200.
1,600 x 1,200 @ 77Hz
1,280 x 1,024 @ 89Hz
1,152 x ,870 @ 104Hz
1,024 x ,768 @ 118Hz
With digital input, displays a maximum resolution
of 1,280 x 1,024 at 85Hz flicker-free refresh
rate for sharp images.
•PerfectFlat®screen
Absolute flat screen provides realistically
proportioned, precise images with reductions
of abient light reflections, image distortion
and eye fatigue.
•OnView®controls including ViewMatch®
All screen adjustments, including input selection
from either analog or digital signal, are made
via an on-screen menu using simple controls.
ViewMatch allows the users to adjust color
temperature and individual color intensity for
screen-to-print matching.
•Digital (DVI) and analog dual inputs
Two systems, including one analog and one
digital, can be connected at the same time
and selected via OnView controls.

•ARAG screen treatment
This specially formulated anti-reflection,
anti-glare screen treatment uses a multi-layer
process to refract unwanted light away from
the user while maintaining the highest
quality of the displayed image.
•TCO ’99 and Energy 2000 certified
This monitor complies with the world's strictest
standards of low radiation, safety, ergonomics,
recycling and power management while saving
costs through automatic power saving modes.
•
•PC and Mac compatible
•Three year limited warranty
*Requires Mac cable adapter (analog signal only). **Requires optional adapter (analog signal only). Copyright © 2000, ViewSonic Corporation. All rights reserved. Corporate names and trademarks stated herein are the property of
their respective companies. Specifications subject to change without notice. The EPA only promotes energy efficiency and does not endorse any particular company or product.
VSPF77_2/00_10K_rev1
381 Brea Canyon Road, Walnut, CA 91789
Phone [phone] • [phone]
Fax [phone] • Internet: www.ViewSonic.com
ViewSonic
®
Professional Series
PF77 Monitor
17" (16.0" VIEWABLE) OPTISYNC
™
COLOR MONITOR WITH ANALOG & DIGITAL INPUTS
CRT Type 17" (16.0" diagonal viewable area) 90°deflection
0.25mm aperture grille pitch
Phosphor RGB medium-short persistence
Glass Surface Tint (TM=41.5%), ARAG®screen treatment
ANALOG INPUT Video RGB analog (0.7Vp-p, 75 ohms)
SIGNAL Sync H/V separate (TTL), composite, sync-on-green
Frequency Fh:30-97kHz, Fv:50-180Hz
DIGITAL INPUT Format Conforms to Digital Visual Interface (DVI)
SIGNAL specifications
COMPATIBILITY PC PC compatible (from VGA up to 1,600 x 1,200)
Mac®* Power Mac™(from 640 x 480 to 1,600 x 1200)
Other Most workstations**
CONNECTOR Analog Signal 15-pin mini D-sub (detached)
Digital Signal 24-pin DVI-V (detached)
Power 3-pin plug (IEC320)
POWER Voltage AC 90–260VAC, 50-60 (+/-2)Hz (auto switch)
Consumption 130W (typ)
USER CONTROLS Basic Power, on/off, 1, up, down, 2
OnView®Contrast, brightness, H/V-position, H/V-size,
pincushion, trapezoid, pin-balance, parallelogram,
hooking, rotation, degauss, H/V convergence,
V linearity center, V linearity symmetry, moiré,
ViewMatch®color, ViewMeter®, focus, purity, OSD
position, language, input select, zoom, data recall
VIDEO INPUT Bandwidth 200MHz (typ)
MISCONVERGENCE 0.25mm (max at center)
0.35mm (max at corner)
DISPLAY AREA Factory Setting 300mm (H) x 225mm (V) (Dependent upon
Maximum Scan 325mm (H) x 243mm (V) signal timing used)
OPERATING Temperature 32°F to 104°F (0°C to 40°C)
CONDITION Humidity 5% to 95% (no-condensation)
DIMENSIONS Physical 417mm (W) x 434mm (H) x 439mm (D)
(16.4" x 17.1" x 17.3")
WEIGHT Net 20.0Kg (44.0 lbs.)
OTHER DDC1, DDC2B, GTF
REGULATIONS UL, CSA, FCC-B, DHHS, DOC-B, Energy Star®
, MPR-II,
TCO ’99, VCCI, CE, C-TICK, NEMKO, DEMKO, PCT,
SEMKO, FEMKO, SASO, NOM, TUV/GS, IRAM, CB,
ISO 9241-3, S-MARK, B-MARK
POWER MANAGEMENT Meets Energy Star®
, VESA®DPMS
™
, TCO ’99 and
Energy 2000 standards
WARRANTY Three year limited warranty on CRT, parts and labor.
48 hour Express Exchange®service option available
ViewSonic Corporation's QMS\ EMS has been registered to ISO 9001
& ISO 14001 by the British Standards Institution.