ViewSonic XG2431 User manual

30-01-2023 10:09
XG2431 - ViewSonic Monitor
https://manuals.viewsonic.com/index.php?title=XG2431_Full_Guide&mobileaction=toggle_view_desktop
1/31
XG2431
Package Contents
Monitor
Power cord
Video cable
Quick start guide
Front View / Rear View
AB
Front View
HDMI
12 DP
C
D D
Rear View
Letter Item
ADisplay Screen
BControl Panel Keys
CSecurity Slot
DMouse Anchor
I/O Ports

30-01-2023 10:09
XG2431 - ViewSonic Monitor
https://manuals.viewsonic.com/index.php?title=XG2431_Full_Guide&mobileaction=toggle_view_desktop
2/31
Number Item
1AC IN
2HDMI
3DisplayPort
4Audio Out
5USB Type B (USB Upstream)
6USB Type A (USB Downstream)
Stand Installation
Always place the device on a flat, stable surface.
Failure to do so may cause the device to fall and
damage the device and/or result in personal injury.
Using the Mouse Anchor

30-01-2023 10:09
XG2431 - ViewSonic Monitor
https://manuals.viewsonic.com/index.php?title=XG2431_Full_Guide&mobileaction=toggle_view_desktop
3/31
Included at the rear of the display, under the I/O ports, are two mouse anchors. Use these to prevent mouse cable
dragging and personalize your mouse use setup.
Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
For use only with a UL certified wall mount
kit/bracket. To obtain a wall-mounting kit or height
adjustment base, contact ViewSonic® or your local
dealer.

30-01-2023 10:09
XG2431 - ViewSonic Monitor
https://manuals.viewsonic.com/index.php?title=XG2431_Full_Guide&mobileaction=toggle_view_desktop
4/31
Maximum
Loading
Hole Pattern (W x
H)
Interface Pad (W x H x
D)
Pad
Hole
Screw Specification &
Quantity
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm - 4 pieces
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the scree facing down.
3. Remove the stand.
4. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4)
screws (M4 x 10 mm).
5. Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
Connecting to Power
1. Connect the power cord to the AC IN jack at the rear of the device.
2. Connect the power cord plug to a power outlet.

30-01-2023 10:09
XG2431 - ViewSonic Monitor
https://manuals.viewsonic.com/index.php?title=XG2431_Full_Guide&mobileaction=toggle_view_desktop
5/31
Connecting External Devices

30-01-2023 10:09
XG2431 - ViewSonic Monitor
https://manuals.viewsonic.com/index.php?title=XG2431_Full_Guide&mobileaction=toggle_view_desktop
6/31
Note: To connect the monitor to an external device (PC, laptop…etc.), please use
one of the included video cables for your application and connect it to both
terminals.
Tilt the monitor backwards to the desired viewing angle via the attached stand
(-5˚ to 15˚).
NOTE: When adjusting, support the monitor firmly with one
hand while tilting the stand backwards with the other hand.
Using the Control Panel Keys
Use the control panel keys to access the Quick Menu, activate Hot Keys,
navigate the On-Screen Display (OSD) Menu, and change the settings.
Quick Menu
Press the 1 (Shortcut) key to activate the Quick Menu.
Tilt Angle Adjustment
Angle Adjustment

30-01-2023 10:09
XG2431 - ViewSonic Monitor
https://manuals.viewsonic.com/index.php?title=XG2431_Full_Guide&mobileaction=toggle_view_desktop
7/31
NOTE: Follow the key guide that appears on the screen to select the option or make adjustments.
Icon Menu Description
ViewMode Select one of the preset color settings.
Volume Adjust the level, or mute the volume.
Contrast/Brightness Adjust the contrast or brightness level.
Input Select Select the input source.
Exit Exit the Quick Menu.
Hot Keys
When the On-Screen Display (OSD) Menu is off, you can quickly access special functions by using the control panel
keys.

30-01-2023 10:09
XG2431 - ViewSonic Monitor
https://manuals.viewsonic.com/index.php?title=XG2431_Full_Guide&mobileaction=toggle_view_desktop
8/31
Key Description
2+3
Press and hold the keys to lock/unlock the OSD
Menu.
When the menu appears on the screen, continue
holding both keys for 10 seconds to lock/unlock
the OSD Menu.
2+4
Press and hold the keys to lock/unlock the Power
button.
When the menu appears on the screen, continue
holding the key for 10 seconds to lock/unlock the
Power button.
3+5
Press the keys to display/hide the boot up screen
when the device is turned on.
General Operation
1. Press the 2/3/4/5 key to display the OSD Menu.

30-01-2023 10:09
XG2431 - ViewSonic Monitor
https://manuals.viewsonic.com/index.php?title=XG2431_Full_Guide&mobileaction=toggle_view_desktop
9/31
2. Press the 1 or 2 key to select the main menu. Then press the 3 key to enter the selected menu.
3. Press the 1 or 2 key to select the desired menu option. Then press the 3 key to enter the sub-menu.
4. Press the 1 or 2 key to adjust/select the setting. Then press the 3 key to confirm.

30-01-2023 10:09
XG2431 - ViewSonic Monitor
https://manuals.viewsonic.com/index.php?title=XG2431_Full_Guide&mobileaction=toggle_view_desktop
10/31
NOTE: Follow the key guide to select the option or make adjustments.
5. Press the 4 key to return to the previous menu.
OSD Tree
Sub-menu Menu Option
HDMI 1
HDMI 2
DisplayPort
Sub-menu Menu Option
Volume (-/+, 0~100)
Sub-menu
Standard
FPS Game
RTS Game
MOBA Game
Movie
Web
Text
MAC
Mono
Input Select
Audio Adjust
ViewMode