ViewSonic ViewBox 100 User manual

1
ViewBox 100
/802.11b/
HPNA

2
Copyright
Copyright©ViewSonic Corporation, 2001. All right reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic
Corporation.
Disclaimer: ViewSonic®Corporation shall not be liable for technical or editorial errors or omissions contained herein;
nor for incidental or consequential damages resulting from furnishing this material, or the performance or use this
product.
ViewSonic Corporation reserves the right to change product specification without notice. Information in this
document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior
written permission from ViewSonic Corporation.
Electronic WarrantyRegistration
Register your ViewBox at www.viewsonic.com. It’s fast, easy, and will simplify future support needs.
For Your Records
The serial number of this product is on the back of the unit. You should note the
serial number of this unit
in the space provided and retain this booklet as a permanent record of your purchase to aid in
identification in the event of theft or loss.
Product Name: ViewBox 100, 802.11b, HPNA
Model Number: VSVBX 23771-1M/ VSVBX 23671-1M(802.11b)/
VSVBX 23692-1M(HPNA)
Serial Number:
Purchase Date:
Power Cord Safety Guidelines
Caution: Use a power cable that is properly grounded. Always use the AC cords listed below for each area:
USA....……………………..UL
Canada……………………CSA
Germany…………………..VDE
Switzerland………………..SEV
Britain………………………BASEC
Japan………………………Appliance Control Act
In other areas, use AC cord which meets local safety standards.

3
AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN
APPROPRIATE SOCKET.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING: THIS APPLIANCE MUSR BE EARTHEED.
IMPORTNT: The wires in this mains leas are colored in accordance with the following code:
Green-and-Yellow: …….Earth
Blue: ……………………..Neutral
Brown: …………………..Live
If the colored wires of the mains leas if this appliance do not correspond with the colored marking identifying the
terminals in your plug, processed as follows:
The wire which is colored GREEN-AND-YELLOW must be connected to the terminals in the plug which is marked
by the letter E or by the Earth symbol or colored GREEN or GREEN-AND-YELLOW.
The wire which is colored BLUE must be connected to the terminal in the plug which is marked with the letter N or
colored BLACK. The wire which is colored BROWN must be connected to the terminal in the plug which the letter L
or colored RED.
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of destination
and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original
cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet CEE-22 requirements and will look like Figure 1 below:
Figure1
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure2), UL Listed, and CSA Labeled. For
units that are mounted on a desk or table, type SVT or SJT cord sets may be used. For units that sit on the floor,
only SJT type cord sets may be used. The cord set must be selected according to the current rating for your unit.
Please consult Table A below for the selection criteria for power cords used in the United States and Canada.
Figure2
For European Countries
In European you must use a cord set which is appropriate for the receptacles in your country. The cord set is HAR-
Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner
conductors.
If you have ant questions concerning which proper power cord to use, please consult with the dealer from whom
you have purchased your ViewBox.

4
Table A
Cord Type Size of Conductors In Cord Maximum Current Rating of Unit
SJT 18AWG
16AWG
14AWG
10Amps
12Amps
12Amps
SVT 18AWG
17AWG 10Amps 12Amps
Important Safety Instructions
Read these instructions carefully. Save these instructions for future reference.
1. Follow all warnings and instructions marked on the product.
2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol clears. Use a
damp cloth for cleaning.
3. Do not use this product near water.
4. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage
to the product.
5. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable
operation of the product and to protect it from overheating, these openings must not be blocked or covered.
Placing the product should never be placed near or over a radiator or heat register, or in a built-in installation
unless proper ventilation is provided.
6. This product should be operated from the type of power indicated on the marking label. If you are not sure
of the type of power available, consult your dealer or local power company.
7. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the
cord.
8. If an extension cord is used with this product, make sure that the total ampere rating of the equipment
plugged into extension cord does not exceed the extension cord ampere rating. Also, make sure that the
total rating of all products plugged into the wall outlet does not exceed the fuse rating.
9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage
points or short out parts that could resulting a fire or electronic shocks. Never spill liquid of any kind on the
product.
10. To avoid electronic shock, do not open the cover. There are no user-serviceable parts inside.
11. Use minimum No 26AWG Wire for telephone cable.
12. Unplug this product from the wall outlet and refer servicing to qualified service personal under the following
conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally when the operating instructions are followed. Adjust only
those controls that are covered by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
e. If the product has been dropped or cabinet has been damaged.
f. If the product exhibits a distinct change in performance, indicating a need for service.

5
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the following measures:
?Reorient or relocate the receiving antenna.
?Increase the separation between the equipment and receiver.
?Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
?Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, (example -use only shielded interface cables when connecting to computer or
peripheral devices) any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

6
Contents
Chapter 1 7
Welcome to ViewBox 100!...................................... 7
Introducing ViewBox 100 .NET Client ................................................................7
Unpacking the System ........................................................................................8
Checking Accessories: .............................................................................8
Chapter 2 9
Getting Started ..................................................... 9
System Overview.................................................................................................9
Front Panel................................................................................................9
Rear Panel ..............................................................................................11
Connecting Your Peripheral Devices................................................................12
Connecting a Monitor..............................................................................12
Connecting a USB Keyboard..................................................................12
Connecting a USB Mouse......................................................................13
Connecting HPNA Cables (Optional).....................................................14
Connecting Audio Cables.......................................................................14
Connecting USB Devices .......................................................................15
Connecting the Network.........................................................................15
Connecting the Power Adapter ..............................................................16
Chapter 3 17
Other Information............................................... 17
Specification ......................................................................................................17
Trouble Shooting...............................................................................................18
Customer Support.............................................................................................20
Appendix 21
Limited Warranty ................................................ 21

Chapter1 Welcome to ViewMate!
7
C
Ch ha ap pt te er r 1 1
W
We el lc co om me e t to o V Vi ie ew wB Bo ox x 1 10 00 0! !
Introducing ViewBox 100 .NET Client
Congratulations on your purchase of this ViewBox 100 product!
This high quality system is based on a stand-alone Intelligent .NET Client. This
system offers an easy way for you connecting to Internet anywhere. The ViewBox
100 also features the following innovative design features
?Compact Size: Uses less than one quarter the space of a conventional
PC.
?Completely configured: Sealed design requires no user installed
upgrades or software.
?Easy to use: Windows CE.NET software design makes define a rich
media expresses.
?Flexible Expansion: The provided USB & PS2 Keyboard/Mouse offer
you another flexibilidy way to access your way do the or host based
application.
?High Reliability: The design uses no moving parts.
?Low maintenance: Software is remotely managed and updated.
?Sleek Design: Attractive design appropriate for your desktop.
?Support HPNA (optional) and Ethernet connection: For dialup and
broadband connectivity.
?Standard Interface: Allow users to connect any analog VGA monitor,
camposite video monitor, S-Video, USB & PS/2 keyboard, and mouse.
?Wireless Internet Access (optional):Mobility and wireless Internet
access at your fingertips.
Please read this user’s manual carefully before unpacking and setting up your
ViewBox 100.NET Client. You can use this User’s Manual as a comprehensive library
for your ViewBox 100 .NET Client. Please refer to this User’s Manual first if you
encounter any problems. Please keep this booklet on hand for product reference.

Chapter 1 Welcome to ViewMate!
8
Unpacking the System
When opening the box of the computer, make sure not to be damage the box, and you
may save the original box and all packing material for future shipping needs.
Upon unpacking the box, make sure the following components are included in the box
and are in good condition. If you find that any of these components are missing or
appear damaged, please contact the ViewSonic Corporation support.
Checking Accessories:
?
User's Manual
?
ViewBox 100 Unit
?
USB Keyboard
?
USB Mouse
?
Speakers (Optional)
?
RJ11 Cable (Phone Line) (HPNA
configuration)
?
AC Power Cord
?
AC Adapter (for ViewBox 100 Unit)

Chapter1 Getting Started
9
C
Ch ha ap pt te er r 2 2
G
Ge et tt ti in ng g S St ta ar rt te ed d
System Overview
Front Panel
Figure 1-1. The front panel of ViewBox 100.NET Client
Refer to the following illustrationsto identify components located at the front panel of
the ViewBox 100, as shown in Figure 1-1.
1. Power Button:
Pressing this button enables you to power on/off the system.
2. Power On/Off Indicator:
The indicator lights up when the system power is on.

Chapter 2 Getting Started
10
3. USB Port x 2:
Two USB ports allow input and output devices to be easily attached to the
ViewBox 100. Please plug in your USB devices in these two ports.
4. Line-out/Speaker Jack:
This jack is connected to your audio device that receives the audio output of the
system, such as speakers, or headphones.
5. Microphone Jack:
This jack is connected to your microphone.

Chapter1 Getting Started
11
Rear Panel
Figure 1-2. The rear panel of ViewBox 100
The rear panel of the ViewBox 100 is where you connect power, peripheral devices
such as a PS/2, input devices and output devices such as the display monitor. Please
refer to the above figures for the location of each of the rear components, as shown in
Figure 1-2.
1. Wall Line Jack (optional):(HPNA Configuration)
This jack is connected to the phone line.
2. Phone Jack (optional):(HPNA Configuration)
This jack is connected to the telephone.
3. RJ45 LAN connector:
For connecting with your LAN to access the network services or surf the Internet.
4. S-Video Connector:
The ViewBox System has a video port that that provides composite video output
to a PAL or NTSC video monitor or VCR.
5. AV Connector:
The ViewBox 100 also provides a AV connector for transmitting video data to a
TV.

Chapter 2 Getting Started
12
6. Monitor/VGA Connector (blue):
Please connect this port with your monitor.
7. PS/2 Keyboard Connector (purple):
Please plug in your PS/2 keyboard into this connector.
8. PS/2 Mouse connector (green):
Please plug in your PS/2 mouse cable here.
9. Power Adapter jack:
This jack is connected to the AC Adapter (provided).
Connecting Your Peripheral Devices
Connecting a Monitor
Connect the monitor cable to the VGA connector on the rear panel of the ViewBox 100.
If the connector has retaining screw, be sure to tighten them, as shown in Figure 1-3.
Figure 1-3. Connecting a monitor via VGA Connector
Connecting a USB Keyboard
Plug the USB Keyboard cable connector into the USB port on the front panel of your
ViewBox System, as shown in Figure 1-4.

Chapter1 Getting Started
13
Figure 1-4. Connecting a USB Keyboard via the USB connector
Connecting a USB Mouse
Plug the USB Mouse cable connector into the USB mouse connector on the USB
Keyboard as shown in Figure 1-4and Figure 1-5.
Figure 1-5. Connecting a USB Mouse via USB Keyboard
NOTE:
There are two standard PS/2 keyboard and mouse connectors built-in on the rear
panel of the ViewBox 100. You can also plug the standard PS/2 keyboard and mouse
cable connectors into these connectors.

Chapter 2 Getting Started
14
Connecting HPNA Cables (Optional)
Connect the phone and wall lines to the HPNA (Home Personal Network Assistant)
card connectors, as shown in Figure 1-6.
Figure 1-6. Connecting the HPNA cables via Wall Line and Phone Jack
Connecting Audio Cables
ViewBox 100 has two integrated audio controller jacks (Line-out and Microphone
jack) . You can connect a microphone to the microphone jack and a speaker or
headphone to the Line-out jack, as shown in Figure 1-7.
Figure 1-7. Connecting Audio devices via Line-out or Microphone Jack.

Chapter1 Getting Started
15
Connecting USB Devices
If you have the USB devices, you can connect these to the USB connectors. To
connect a USB device to the USB connector, plug the USB device cable connector
into the USB connector of your ViewMate 100, as shown in Figure 1-8.
Figure 1-8. Connecting USB devices via USB Connector
Connecting the Network
If you are under a LAN environment, you can connect to the network via the Ethernet
connector to the Hub, as shown in Figure 1-9.
Figure 1-9. Connecting to the network (LAN)

Chapter 2 Getting Started
16
Connecting the Power Adapter
Plug one end of the power adapter to the power adapter jack, and then the other end
of the power cord into the wall outlet, as shown in Figure 1-10.
Figure 1-10. Connecting to the Power Adapter

Chapter3 Other Information
17
C
Ch ha ap pt te er r 3 3
O
Ot th he er r I In nf fo or rm ma at ti io on n
Specification
Dimension 225 (L) x 233.5(H) x 38 (W) mm (w/plastic)
Chassis ?base Metal case
?Keylock
?EMI Clip
?Vertical standing
?Horizontal position is possible
?Use 0.8mm thick
?No
?Yes
?Yes
?Yes
Bezel ?Materials
?Injection Color
?Texture
?Every Plastic Component must
be marked with
?ABS and
?Pantone 293U or other
?Model-Tech MT11020 Vapor Hone
?Material type, Flammability (if
applicable), recyclable logo, P/N
Drive Bay ?HDD (Storage)
?CD ROM
?FDD
?No
?No
?No
CPU Heatsink
?Active Heatsink
?Passive Heatsink
?No
?No
Expansion ?IO Slot in Back ?No
Back Panel ?Serial Port
?Parallel Port
?PS2
?RJ45 for LAN
?RJ11 for HPNA
?Audio Jack
?VGA
?AV-out
?S-Connector
?DFP/DVI
?12 DC in
?No
?No
?2
?1
?2(on HPNA card)
?No
?1
?1
?1
?No
?1

Chapter 3 Other Information
18
Front Panel ?USB
?Audio Jack
?1394 connector
?Power Button
?2
?2(for Headphone-out and MIC-in)
?No
?Yes
LED spec. ?Power LED
?LAN LED in connector
?Green Always on/off: Power on/off
?Upper: Green blinking for active.
Lower: Orange for link.
Power Supply
?Vendor
?Watts
?Hipro and Delta
?12V/36W
Wireless LAN
?AMBIT ?Mini PCI 802.1b
Certification ?EMC
?Safety
?WIN CE
?FCC/CE/
?UL/CUL or CAS/TUV
All specifications listed above are subject to change without prior notice.
Trouble Shooting
Question: ViewBox 100 no power.
Solution: ?Make sure power button (or switch) is ON.
?Make sure AC power cord is securely connected to the back of the
monitor and to a power outlet.
?Plug another electrical device (like a radio) into the power outlet to verify
that the outlet is supplying proper voltage.
Question: Power on but no screen image.
Solution: ?Make sure the video cable supplied with the monitor is tightly secured to
the video output port on the back of the computer. If the other end of the
video cable is not attached permanently to the monitor, tightly secure it to
the monitor.
Question: ViewBox 100 locks up when running applications, or runs slowly.
Solution: ?ViewBox 100 is locked up. Close some applications those are not in use,
if this doesn’t work, try to restart the ViewBox 100 by turning power off
and on. Be sure to save your data before you restart the system.
Question: Keyboard Error
Solution: ?Check the connections between the keyboard and the ViewBox 100.

Chapter3 Other Information
19
Question: Screen display is small
Solution: ?Use a lower vertical refresh rate. If the refresh rate is too high, some
monitors will compensate by making the image smaller.
Question: No Sound
Solution: ?Be certain the power is on for the speakers. Make sure that the unit is
hooked up to an AC adapter and the power button is ON.
?Use only the AC adapter provided. Check the connections between the
computer and the speakers.
?Be certain there is output from the sound device. Remove the plug from
the sound device, turn the speakers to maximum volume and touch the
tip of the plug. You should hear a hum or buzz coming from the
speakers. If you do, the speakers are working. Check the sound device
to locate the problem.
?Are headphones plugged into the headphone jack? Headphones plugged
into the speaker's headphone jack will block sound from the speakers.
Remove the headphones to restore sound to the speakers.

Chapter 3 Other Information
20
Customer Support
For the most expedient answer to your question, do the following:
1. Check “TroubleShooting”on the previous section.
2. For assistance contact your reseller.
3. For further assistance see the contact information listed below.
If contact information for your country or region is not listed below, ask your reseller to
refer you to a service center.
NOTE:
You will need to provide the serial number (on the back of the product).
Country/Region T = Telephone; F = Fax Email
United States
Canada
T: [phone]
F: [phone]
T: [phone]
F: [phone]
[email protected]
[email protected]
United Kingdom
Europe, Middle East,
Baltic countries, and
North Africa
T: 0800 833 648
F: 0044 (0)1293 643910
T: 0044 (0)1293 643900
F: 0044 (0)1293 643910
Australia
New Zealand
Singapore/Southeast
Asia
Other Asia/Pacific
countries and Indian
Peninsula
800 880 818
T: 64-3 -366-1135
F: 64-3-366-7006
T: 65-273-4018
F: 65-273-1566
T: 886-2-2248-4072
F: 886-2-2249-1751
[email protected]
[email protected]
[email protected]
[email protected]
South Africa T: 27-11-314-0002
F: 27-11-314-0002 [email protected]
.