Vigil WRX User manual

Wireless Receiver Installation Instructions
Vigil Health Solutions Inc. Page 1
2102 - 4464 Markham Street * Victoria, BC * Canada * V8Z 7X8
Phone: [phone] Toll Free: 1.877.850.1122
Fax: [phone] Web: www.vigil.com
Revised: June 26, 2006
W
Wi ir re el le es ss s R Re ec ce ei iv ve er r a an nd d S Se er rv ve er r
W
WR RX X & & W WS SR RX X
Description
The Wireless Receiver (WRX) receives wireless transmissions from wireless devices and
communicates the data back to the central computer via the network cable. Wireless Receivers are
connected in series using a CAT5 cable and are terminated with RJ45 modular plugs. One Wireless
Receiver covers an area of approximately 100 feet square depending on building construction. The
Wireless Server Receiver (WSRX) is a variation of the Wireless Receiver that controls the wireless
portion of the communications. Typically one WSRX is required per building.
Mounting Instructions
 Screw mount to wall or ceiling using mounting holes and appropriate mounting hardware for
location. Mounting hardware not supplied.
 Typically mounted above the ceiling tile in a corridor. Mount vertically on the wall above the
ceiling tile, with the antenna pointing downward. Antenna does not need to protrude below tile.
 Alternately, receivers can be mounted below the ceiling or on the ceiling. See below for mounting orientation options. If
mounting on a horizontal surface a 90-degree antenna will be required.
 Screw antenna onto WRX. Position 90-degree antenna vertically as appropriate.
Do not mount Wireless Receivers on or near metal objects (HVAC, I Beams, etc) or electrical devices (motors, high
voltage switching, etc) as they can interfere with the wireless signals
Enclosure Dimensions 5.5” x 3” x 1”
Antenna 6.25” Detachable Nearson 900MHz ISM Band. Model 161.
Cable Type CAT5 or CAT5E 4 Pair 24AWG
Connectors RJ45 Modular Plug (AMP)
WRX with straight antenna
WRX with 90°antenna

Wireless Receiver Installation Instructions
Vigil Health Solutions Inc. Page 2
2102 - 4464 Markham Street * Victoria, BC * Canada * V8Z 7X8
Phone: [phone] Toll Free: 1.877.850.1122
Fax: [phone] Web: www.vigil.com
Revised: June 26, 2006
Wiring and Connections
Installation Instructions
1. Terminate incoming and outgoing CAT5 cables on RJ45 modular plugs as shown above. Use supplied AMP plugs or
approved equivalent. Ensure cables are labelled appropriately.
2. After connecting the modular plugs on both ends of the cable, use an approved network cable tester to verify the connections
on both ends. All pins must be connected straight through.
3. Once both ends of the cable are tested, plug the cable coming from the direction of the central equipment into the socket
marked “IN” and plug the cable going to the next receiver into the socket marked “OUT”.
4. Set dipswitches as follows:
a. If receiver is at the end of the line (no outgoing run) set the Terminating Resistor to ON by turning the switch labelled
“T” toward the base of the unit (labelled ON)
b. If the receiver is a WSRX (Server) set the unit to Server mode by turning the switch labelled “S” toward the base of
the unit (labelled ON)
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Conductor Use
Orange/ White + 24 VDC
Orange + 24 VDC
Green/ White + 24 VDC
Blue DATA HI
Blue/ White DATA LO
Green GND
Brown/ White GND
Brown GND
RJ45 Standard Pinout
Hook is underneath
1 Orange/ White
2 Orange
3 Green/ White
4 Blue
5 Blue/ White
6 Green
7 Brown/ White
8 Brown
Receiver ID
Turn T Switch to ON if at
end of line Turn S Switch to ON if settin
g
to a Serve
r
CAN Bus Communication
LED
Wireless Communication
LED

Wireless Receiver Installation Instructions
Vigil Health Solutions Inc. Page 3
2102 - 4464 Markham Street * Victoria, BC * Canada * V8Z 7X8
Phone: [phone] Toll Free: 1.877.850.1122
Fax: [phone] Web: www.vigil.com
Revised: June 26, 2006
PHYSICAL ELECTRICAL
Height 139.7mm (5.5”) Operating Voltage 10-40V DC
Width 76.2mm (3”) Wireless 900MHz FHSS Transceiver
Depth 25.4mm (1”) Operating Current 35mA, 85mA burst
Weight (with antenna) 141 grams
Enclosure High impact white plastic enclosure
WRX01 – FCC ID UI6-WRX01
Temperature Ratings Operating:
Storage/Transport -0°C to 50°C (32°F to 122°F)
-55°C to 85°C (-67°F to 185°F) WSRX01 – FCC ID KQL-AC4490
Compliance: This Device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: This equipment has been approved for portable
applications where the equipment can be used in direct contact
with the human body. Excessive RF exposure should be
avoided.
Limited Warranty
Vigil®Health Solutions Inc. (Vigil) warrants all products bearing the Vigil®name (“the Product” or “Products”) to be in conformance with specifications
and free from defects in materials and workmanship for a period of one (1) year (unless otherwise stated) from date of shipment and will repair o
r
replace (at our option), any unit that is found to be defective and returned to us under warranty.
To exercise the warranty the product must be returned to Vigil freight prepaid and insured. Vigil reserves the right to make the final decision whethe
r
there is a defect in materials or workmanship, and whether or not the product returned is within the warranty.
This warranty does not cover damage due to normal wear and tear, improper installation, accident or tampering, misuse or neglect, or where goods
have been subjected to operating or environmental conditions exceeding those stated in the applicable specifications and extends to include floods,
fire, lightening and any other such acts of nature.
This warranty shall apply to the Product only. All other products distributed by Vigil and made by others are covered by the manufacturer’s warranty.
A
ll products, accessories, or attachments of others used in conjunction with the Product, including batteries, shall be covered solely by their own
warranty, if any. Vigil shall not be liable for any damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially, o
r
otherwise,
caused by the malfunction of the Product due to products, accessories, attachments of others, including batteries, used in conjunction with the
Products.
The foregoing warranty is exclusive and expressly in lieu of all other warranties, obligations or liabilities, whether written, oral, express or implied o
r
arising under law. In no case shall Vigil be liable to anyone for any consequential or incidental damages for breach of this warranty or any othe
r
warranties whatsoever, as aforesaid.
Vigil shall have no liability for any death, personal and/or bodily injury and/or damage to property or other loss whether direct, indirect,
incidental, consequential, or otherwise based on a claim that the Product failed to function. However, if Vigil is held liable, whether directly o
r
indirectly, for any loss or damage arising under this limited warranty or otherwise, regardless of the cause or origin, Vigil’s maximum liability shall not
in any case exceed the purchase price of the Product, which shall be fixed as liquidated damages and not as a penalty, and shall be the complete
and exclusive remedy against Vigil.
Vigil Health Solutions Inc. reserves the right to modify the appearance, operation and functionality at its discretion.