Viking Custom Front series User manual

Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
[phone]
For produ t information,
all 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange. om
F20418 (PS021407J)
Viking In tallation Guide
Cu tom FrontModel
All Refrigerator/Freezer/Side-by-Side/Bottom Mount

Table of Contents
Warnings and Important Information
Bottom Mount
Dimensions (36”)
Spe ifi ations (36”)
Cutout Dimensions (36”)
Anti-Tip Dimensions (36”)
Overlay Dimensions (36”)
Custom Grille Dimensions (36”)
Custom Grille Dimensions (Dual 36”)
Side-By-Side
Dimensions (42”)
Dimensions (48”)
Spe ifi ations (42”and 48”)
Cutout Dimensions (42”)
Anti-Tip Dimensions (42”)
Cutout Dimensions (48”)
Anti-Tip Dimensions (48”)
Overlay Dimensions (42”)
Overlay Dimensions (48”)
Custom Grille Dimensions (42”)
Custom Grille Dimensions (48”)
All Refrigerator/Freezer
Dimensions (30”and 36”)
Spe ifi ations (30”and 36”)
Cutout Dimensions (30”)
Anti-Tip Dimensions (30”)
Cutout Dimensions (36”)
Anti-Tip Dimensions (36”)
Dimensions (Dual 30”)
Dimensions (Dual 30”and 36”)
Dimensions (Dual 36”and 36”)
Spe ifi ations (Dual)
Cutout Dimensions (Dual 30”)
Anti-Tip Dimensions (Dual 30”)
Cutout Dimensions (Dual 30”and 36”)
Anti-Tip Dimensions (Dual 30”and 36”)
Cutout Dimensions (Dual 36”)
Anti-Tip Dimensions (Dual 36”)
Overlay Dimensions (30”and 36”)
Custom Grille Dimensions (30”)
Custom Grille Dimensions (36”)
Custom Grille Dimensions (Dual 30”)
Custom Grille Dimensions (Dual 30”and 36”)
Custom Grille Dimensions (Dual 36”)
Cabinet Information
Custom Panel General Information
I e and Water Dispenser Bezel Removal
Custom Door Panel Installation–Refrigerator
Custom Door Panel Installation–Freezer
I e and Water Dispenser Bezel Installation
Custom Panel Hinge Cutout
Custom Grille Installation
General Information
Unpa king & Moving
Installation
Hinge Adjustment
Ki kplate Installation
Door Stop Adjustment
Water Filter Installation
Water Filter System Spe ifi ations
Final Installation
Performan e Che klist
Control Panels
Servi e & Registration
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
IMPORTANT–Plea e Read and Follow
•Make sure that in oming voltage is the same
as unit rating. An ele tri rating plate
spe ifying voltage, frequen y, wattage,
amperage, and phase is atta hed to the
produ t.
• To redu e the risk of fire, ele tri al sho k, or
injury to persons, installation work and
ele tri al wiring must be done by qualified
people in a ordan e with all appli able
odes and standards, in luding fire-rated
onstru tion.
• The installer should leave these instru tions
with the onsumer who should retain them for
lo al inspe tor’s use and for future referen e.
It is your responsibility to:
• Comply with installation spe ifi ations and
dimensions.
• Properly install unit.
• Remove any moldings or de orative panels
that prevent the unit from being servi ed.
• Make sure that you have these materials (not
provided with your unit), whi h are ne essary
for proper installation:
•1/4” (6 mm) opper tubing with shutoff
valve
•6– #8 x 3” (7.6 m) wood s rews (longer
s rews may be required)
•1– Saddle valve (do not use self-pier ing
feature of the valve)
• Assure that floor will support unit, door
panels and ontents (approximately 1200
pounds [540 kg]).
• Provide a properly grounded ele tri al outlet.
• Assure that lo ation will permit applian e
doors to open a minimum of 90˚.
W A R N I N G
TIP OVER HAZARD
Applian e is top heavy
and tips easily when not
ompletely installed.
Keep doors losed until
applian e is ompletely installed and
se ured per installation instru tions.
Use two or more people to move and install
applian e. Failure to do so an result in death
or serious injury.
ELECTRICAL SHOCK HAZARD
Dis onne t power or turn
power dis onne t swit h to
OFF position before removing
top grille. Failure to do so an
result in death or ele tri sho k.
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
applian e. Always read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts to hazards that an
result in injury or death to you and
others.
All safety messages will be pre eded by the
safety alert symbol and the word“DANGER”
or “WARNING.” These words mean:
Failure to follow these instructions can
result in serious injury or death.
Failure to follow these instructions can
result in serious injury or death.
All safety messages will identify the
hazard, tell you how to redu e the han e
of injury, and tell you what an happen if
the instru tions are not followed.
Most of the unit’s weight is at the top. Extra are is needed when moving the unit to prevent tipping.
Use ardboard shipping material or plywood under unit until it is installed in the operating position
to prote t floor surfa e.
D A N G E R
W A R N I N G
WARNING

Spe ifi ations (Bottom Mount)
3
51-7/8”
(131.8 cm)
23-1/16”
(58.6 cm)
3-1/2”
(8.9 cm)
82-7/8”
(210.5 cm)
min.
to
84-1/16”
(213.5 cm)
max.
Measurement varies
(locally supplied hardware)
23 13/16”
(60.5 cm)
24 3/4”
(62.9 cm)
35”
(98.9 cm)
36”
(91.4 cm)
Dimensions (Bottom Mount)
2
36” Botto Mount
Description DFBB363
Overall width 36” (91.5 m)
Overall height (from bottom) 82-3/4” (210.2 m) min. to 84-1/16” (213.5 m) max.
Overall depth (from rear) To front edge of side trim: 23-13/16” (60.5 m)
To front of top grille: 24-3/4” (62.9 m)
To front edge of door trim: 24” (61.0 m)
Cutout width 36” (91.5 m)
Cutout height 82-7/8” (210.5 m) min. to 84-1/16” (213.5 m) max.
Cutout depth 24” (61.0 m) min.*
Ele tri al requirements 115 volt, 60 Hz, 15 amp dedi ated ir uit; 3-wire ord with
grounded 3-prong plug atta hed to produ t
Maximum amp usage 9.9 amps
Inlet water 1/4” opper tubing inlet waterline; minimum 20 psi;
requirements maximum 120 psi
Overall interior dimensions
Refrigerator 15.2 u. ft. (431 liters)
Freezer 5.1 u. ft. (145 liters)
Total apa ity 20.3 u. ft. (576 liters)
Maximum panel weight Fresh food 45 lbs. (20.4 kg) Freezer 20 lbs. (9.0 kg)
Approximate shipping weight 500 lbs. (227.3 kg)
*Full overlay models fit flush in 25” (63.5 m) deep abinet openings. They an be installed in standard 24” (61.0 m)
deep openings. The door fa es and top grille will protrude 3/4” (1.9 m) into the room.
36” Bottom Mount

54
9”
(22.9 cm)
73-3/8”
(186.4 cm)
82-7/8”
(210.5 cm) min.
anti-tip board &
opening height
84-1/16”
(213.5 cm) max.
anti-tip board &
opening height
36”
(91.5 cm)
24”
(61.0 cm)
Electric outlet location
Water line entry area
36”
(91.5 cm)
6-3/4”
(17.1 cm)
7-5/8”
(19.4 cm)
3”
(7.6 cm)
5/8”
(1.5 cm)
5/8”
(1.5 cm)
10-1/2”
(26.7 cm)
5/8”
(1.5 cm)
10-3/4”
(27.3 cm)
1”
(2.5 cm)
3-5/8”
(9.2 cm)
Optional floor
water line entry
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
Cutout Dimensions (Bottom Mount)
36” Bottom Mount
One 2”x 4” mounting board
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm),then shim
behind the mounting board by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly underanti-tip board.
Anti-tip location
79-3/8”
(201.6 cm) min.
to bottom of
anti-tip board
80-1/2”
(204.6 cm) max.
to bottom of
anti-tip board
29”
(73.7 cm)
3-1/2”
(8.9 cm)
1-1/2”
(3.8 cm)
Anti-Tip Dimensions (Bottom Mount)
36” Bottom Mount

Reverse dimensions
for other end.
1/2”
(1.27 cm)
1-1/2”
(3.81cm)
1/4” Radius
(.64 cm)
2-3/4”
(6.98 cm)
1/2”
(1.27cm)
3/4”
(1.90cm)
1/2”
(1.27cm)
1/8”
(.31 cm)
1/2”
(1.27 cm)
1/4” Radius 1/4” Radius
(1.2 cm)
(1.2 cm)
1/4” Radius
(.64 cm)
7/8”
(2.22 cm)
1/2”
(1.27 cm)
34”
(86.36 cm)
34”
(86.36 cm)
3/4”
(1.90 cm)
1/2”
(1.27 cm)
3/4”
(1.90 cm)
3-3/4”
(9.52 cm)
3-3/4”
(9.52 cm)
3-5/8”
(9.20 cm)
33-15/16”
(86.20 cm)
3”
(7.62 cm)
3”
(7.62 cm)
3/4”
(1.90 cm)
35-1/2”
(90.17 cm)
1/2”
(1.27 cm)
3-1/8”
(7.93 cm)
Optional hinge cover
32-3/16”
(81.75 cm)
5-17/32”
(14.10 cm)
4-11/64”
(10.59 cm)
30-27/32”
(78.34 cm)
3 25/32”
(9.60 cm)
27/32”
(.84 cm)
9/16”
(1.42 cm)
1/4”
(.635 cm)
16.5˚
20.0˚
Custom Grille Dimensions (Bottom Mount)
7
35-1/4”
(89.5 cm)
23-1/16”
(58.6 cm)
3/4”
(1.9 cm)
35-1/4”
(89.5 cm)
34-3/8” to notch
(86.6 cm)
7/8”
(2.2 cm)
5/8”
(1.6 cm)
51-7/8”
(131.8 cm)
51-1/4”
(130.2 cm)
3/4”
(1.9 cm)
Note: Corner notch is for left
hinge door. (Reverse for right hinge)
See page 50 for cutout instructions
7/8”
(2.2cm)
5/8”
(1.6 cm)
1/8”
(0.3 cm)
2”
(5.1 cm)
For Models made
before 9/22/06
Note: Inset shown upside down.
1-13/16”
(4.60 cm)
5/8”
5/8”
(1.6 cm)
(1.6 cm)
3”
(7.62 cm)
3/32”
(.24 cm)
5/8”
5/8”
(1.6 cm)
For Models made
after 9/22/06
Note: Inset shown upside down
Overlay Dimensions (Bottom Mount)
6
36” Custom Panels 36” Custom Grille
Note: Panel overlays must be dry, solid, straight one
piece panels. The use of multiple panel pieces to
achieve the dimensions is not recommended.
Note: If 1/4” back panel is used, the dimensions are
1/4” smaller than the dimensions shown on the top, left
and right side. At the bottom, the 1/4” back panel
should be 5/8” smaller than the dimensions shown.

75-15/16”
(192.9 cm)
3-1/2”
(8.9 cm)
82-7/8”
(210.5 cm)
min.
to
84-1/16”
(213.5 cm)
max.
Measurement varies
(locally supplied hardware)
23-13/16”
(60.5 cm)
24-3/4”
(62.9 cm)
41”
(104.1 cm)
42”
(106.7 cm)
Dimensions (Side-By-Side)
9
3 25/32”
(9.60 cm)
27/32”
(.84 cm)
9/16”
(1.42 cm)
1/4”
(.635 cm)
16.5˚
20.0˚
Note: This part should be
locatedat the center of the
grille. If desired, twoper grille
canbe used by dividing the
length of the grille into thirds.
1/2”
(1.27cm)
1-1/2”
(3.81 cm)
1/4” Radius
(.64 cm)
2-3/4”
(6.98 cm)
1/2”
(1.27cm)
3/4”
(1.90 cm)
3/8”
(0.38 cm)
1/2”
(1.27 cm)
R 3/32”
(0.09 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
13/32”
(1.03 cm)
9/16”
(1.43 cm)
1/8”
(.32 cm)
Grillesupport
2-7/8”
(7.30 cm)
1”
(2.54 cm)
1/2”
(1.27 cm)
1/8”
(.31 cm)
1/2”
(1.27 cm)
1/4” Radius1/4” Radius
(1.2 cm) (1.2 cm)
1/4” Radius
(.64 cm)
Reverse dimensions
for other end.
7/8”
(2.22 cm)
1/2”
(1.27 cm)
1/2”
(1.27 cm)
3-1/8”
(7.93 cm)
Optional hinge cover
1/2”
(1.27 cm)
3-5/8”
(9.20 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
3-3/4”
(9.52 cm)
3-3/4”
(9.52 cm)
3”
(7.62 cm)
3”
(7.62 cm)
3/4”
(1.90 cm)
71-1/2”
(181.61 cm)
70”
(177.80 cm
69-15/16”
(177.64 cm)
70”
(177.80 cm)
68-3/64”
(172.83 cm)
66-27/32”
(169.78 cm)
4-11/64”
(11.27 cm)
5-17/32”
(14.04 cm)
30-27/32”
(78.34 cm)
32-3/16”
(81.75 cm)
40-11/64”
(102.03 cm)
41-25/64”
(10 5.13 cm)
Custom Grille Dimensions (Bottom Mount)
8
Dual 36” Custom Grille
42” Side-By-Side

Spe ifi ations (Side-By-Side)
11
75-15/16”
(192.9 cm)
3-1/2”
(8.9 cm)
82-7/8”
(210.5 cm)
min.
to
84-1/16”
(213.5 cm)
max.
23-13/16”
(60.5 cm)
24-3/4”
(62.9 cm)
47”
(119.4 cm)
48”
(121.9 cm)
Measurement varies
(locally supplied hardware)
Dimensions (Side-By-Side)
10
42” Side-By-Side
Description DFSB423 DFSB423D
Overall width 42” (106.7 m)
Overall height (from bottom) 82-3/4” (210.2 m) min. to 84-1/16” (213.5 m) max.
Overall depth (from rear) To front edge of side trim: 23-13/16” (60.5 m)
To front of top grille: 24-3/4” (62.9 m)
To front edge of door trim: 24” (61.0 m)*
Cutout width 42” (106.7 m)
Cutout height 82-7/8” (210.5 m) min. to 84-1/16” (213.5 m) max.
Cutout depth 24” (61.0 m) min.*
Ele tri al requirements 115 volt, 60 Hz, 15 amp dedi ated ir uit; 3-wire ord with
grounded 3-prong plug atta hed to produ t
Maximum amp usage 9.9 amps
Inlet water 1/4” opper tubing inlet waterline; 1/4” opper tubing inlet waterline;
requirements minimum 20 psi; maximum 120 psi minimum 35 psi; maximum 120 psi
Overall interior dimensions
Refrigerator 15.0 u. ft. (425 liters) 14.5 u. ft. (411 liters)
Freezer 9.0 u. ft. (255 liters) 8.6 u. ft. (244 liters)
Total apa ity 24.0 u. ft. (680 liters) 23.1 u. ft. (654 liters)
Maximum panel weight Fresh food 40 lbs. (18.1 kg) Freezer 35 lbs. (15.9 kg)
Approximate shipping weight 525 lbs. (236.2 kg)
48” Side-By-Side
Description DFSB483 DFSB483D
Overall width 48” (121.9 m)
Overall height (from bottom) 82-3/4” (210.2 m) min. to 84-1/16” (213.5 m) max.
Overall depth (from rear) To front edge of side trim: 23-13/16” (60.5 m)
To front of top grille: 24-3/4” (62.9 m)
To front edge of door trim: 24” (61.0 m)*
Cutout width 48” (121.9 m)
Cutout height 82-7/8” (210.5 m) min. to. 84-1/16” (213.5 m) max
Cutout depth 24” (61.0 m) min.*
Ele tri al requirements 115 volt, 60 Hz, 15 amp dedi ated ir uit; 3-wire ord with
grounded 3-prong plug atta hed to produ t
Maximum amp usage 9.9 amps
Inlet water 1/4” opper tubing inlet waterline; 1/4” opper tubing inlet waterline;
requirements minimum 20 psi; maximum 120 psi minimum 35 psi; maximum 120 psi
Overall interior dimensions
Refrigerator 18.5 u. ft. (524 liters) 17.9 u. ft. (507 liters)
Freezer 8.9 u. ft. (252 liters) 8.5 u. ft. (241 liters)
Total apa ity 27.4 u. ft. (776 liters) 26.4 u. ft. (748 liters)
Maximum panel weight Fresh food 50 lbs. (22.7 kg) Freezer 35 lbs. (15.9 kg)
Approximate shipping weight 650 lbs. (292.5 kg)
*Full overlay models fit flush in 25” (63.5 m) deep abinet openings. They an be installed in standard 24” (61.0 m)
deep openings. The door fa es and top grille will protrude 3/4” (1.9 m) into the room.
48” Side-By-Side

1312
One 2”x 4” mounting board
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm),then shim
behind the mounting board by the difference.
Bottom of anti-tip board is3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placedfirmly under anti-tip board.
Anti-tip location
79-3/8”
(201.6 cm) min.
to bottom of
anti-tip board
80-1/2”
(204.6 cm) max.
to bottom of
anti-tip board
35”
(88.9 cm)
3-1/2”
(8.9 cm)
1-1/2”
(3.8 cm)
Anti-Tip Dimensions (Side-By-Side)
9”
(22.9 cm)
73-3/8”
(186.4 cm)
82-7/8”
(210.5 cm) min.
anti-tip board &
opening height
84-1/16”
(213.5 cm) max.
anti-tip board &
opening height
42”
(106.7 cm)
24”
(61.0 cm)
Electric outlet location
Water line entry area
42”
(106.7 cm)
6-3/4”
(17.1 cm)
7-5/8”
(19.4 cm)
3”
(7.6 cm)
5/8”
(1.5 cm)
5/8”
(1.5 cm)
10-1/2”
(26.7 cm)
5/8”
(1.5 cm)
10-3/4”
(27.3 cm)
1”
(2.5 cm)
3-5/8”
(9.2 cm)
Optional floor
water line entry
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
Cutout Dimensions (Side-By-Side)
42” Side-By-Side 42” Side-By-Side

1514
One 2”x 4” mounting boards
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24”(61.0 cm), then shim
behind the mounting board by the difference.
Bottom of anti-tip board is3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placedfirmly under anti-tip board.
Anti-tip location
79-3/8”
(201.6 cm) min.
to bottom of
anti-tip board
80-1/2”
(204.6 cm) max.
to bottom of
anti-tip board
41”
(104.1 cm)
3-1/2”
(8.9 cm)
1-1/2”
(3.8 cm)
Anti-Tip Dimensions (Side-By-Side)
9”
(22.9 cm)
73-3/8”
(186.4 cm)
82–7/8”
(210.5 cm) min.
anti-tip board &
opening height
84–1/16”
(213.5 cm) max.
anti-tip board &
opening height
48”
(121.9 cm)
24”
(61.0 cm)
Electric outlet location
Water line entry area
47-1/2”
(120.7 cm)
6-3/4”
(17.1 cm)
7-5/8”
(19.4 cm)
3”
(7.6 cm)
5/8”
(1.5 cm)
5/8”
(1.5 cm)
10-1/2”
(26.7 cm)
5/8”
(1.5 cm)
10-3/4”
(27.3 cm)
1”
(2.5 cm)
3-5/8”
(9.2 cm)
Optional floor
water line entry
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
Cutout Dimensions (Side-By-Side)
48” Side-By-Side 48” Side-By-Side

28-5/16”
(71.9 cm)
75-1/2”
(191.8 cm)
3/4”
(1.9 cm)
18-11/16”
(47.5 cm)
3/4”
(1.9 cm)
28-5/16”
(71.9 cm)
75-1/2”
(191.8 cm)
3/4”
(1.9cm)
18-11/16”
(47.5 cm)
31-5/8”
(80.3 cm)
10-11/16”
(21.7 cm)
12-3/8”
(31.4 cm)
3/4”
(1.9 cm)
Overlay Dimensions(Side-By-Side)
17
22-13/16”
(57.9 cm)
75-1/2”
(191.8 cm)
3/4”
(1.9 cm)
3/4”
(1.9 cm)
18-3/16”
(46.2 cm)
22-13/16”
(57.9 cm)
75-1/2”
(191.8 cm)
3/4”
(1.9 cm)
18-3/16”
(46.2 cm)
31-5/8”
(80.3 cm)
10-11/16”
(21.7 cm)
12-3/8”
(31.4 cm)
3/4”
(1.9 cm)
Overlay Dimensions(Side-By-Side)
16
42” Custom Panels
42” Custom Panels
with Dispenser
48” Custom Panels
48” Custom Panels
with Dispenser
Note: Panel overlays must be dry, solid, straight
one piece panels. The use of multiple panel pieces
to achieve the dimensions is not recommended.
Note: If 1/4” back panel is used, the dimensions
are 1/4” smaller than the dimensions shown.
Note: Panel overlays must be dry, solid, straight
one piece panels. The use of multiple panel pieces
to achieve the dimensions is not recommended.
Note: If 1/4” back panel is used, the dimensions
are 1/4” smaller than the dimensions shown.

1/2”
(1.27 cm)
1/8”
(.31 cm)
1/2”
(1.27 cm)
1/4” Radius 1/4” Radius
(1.2 cm)
(1.2 cm)
1/4” Radius
(.64 cm)
Reverse dimensions
for other end.
7/8”
(2.22 cm)
1/2”
(1.27 cm)
2-1/8”
(5.39 cm)
3-1/8”
(7.94 cm)
3-5/8”
(9.20 cm)
1-3/8”
(3.49 cm)
3/8”
(.95 cm)
3/8” Radius 3/8” Radius
(.95cm) (.95 cm)
3/8” Radius
(.95cm)
47-1/2”
(120.65 cm)
1/2”
(1.27 cm)
3-1/8”
(7.93 cm)
Optional hinge cover
46”
(116.84 cm)
1/2”
(1.27 cm)
3-5/8”
(9.20 cm)
45-15/16”
(116.68 cm)
46”
(116.84 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
3-3/4”
(9.52 cm)
3-3/4”
(9.52 cm)
3”
(7.62 cm)
3”
(7.62 cm)
3/4”
(1.90 cm)
30-27/32”
(78.34 cm)
32-3/16”
(81.75 cm)
11-17/32”
(29.28 cm)
10-11/64”
(15.84 cm)
1/2”
(1.27 cm)
1-1/2”
(3.81 cm)
1/4” Radius
(.64 cm)
2-3/4”
(6.98 cm)
1/2”
(1.27 cm)
3/4”
(1.90 cm)
Custom Grille Dimensions (Side-By-Side)
19
1/2”
(1.27 cm)
1-1/2”
(3.81 cm)
1/4” Radius
(.64 cm)
2-3/4”
(6.98 cm)
1/2”
(1.27cm)
3/4”
(1.90 cm)
1/2”
(1.27 cm)
1/8”
(.31 cm)
1/2”
(1.27 cm)
1/4” Radius 1/4” Radius
(1.2 cm)
(1.2 cm)
1/4” Radius
(.64 cm)
Reverse dimensions
for other end.
7/8”
(2.22 cm)
1/2”
(1.27 cm)
2-1/8”
(5.39 cm)
3-1/8”
(7.94 cm)
3-5/8”
(9.20 cm)
1-3/8”
(3.49 cm)
3/8”
(.95 cm)
3/8” Radius
3/8” Radius
(.95 cm)
(.95 cm)
3/8” Radius
(.95 cm)
41-1/2”
(105.41 cm)
1/2”
(1.27 cm)
3-1/8”
(7.93 cm)
Optional hinge cover
40”
(101.60 cm)
40”
(101.60 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
3-1/4”
(9.52 cm)
3-3/4”
(9.52 cm)
1/2”
(1.27 cm)
3-5/8”
(9.20 cm)
39-15/16”
(101.44 cm)
3”
(7.62 cm)
3”
(7.62 cm)
3/4”
(1.90 cm)
24-27/32”
(63.10 cm)
26-3/16”
(66.51 cm)
5-17/32”
(14.04 cm)
4-11/64”
(10.60 cm)
Custom Grille Dimensions (Side-By-Side)
18
42” Custom Grille 48” Custom Grille

21
35”
(88.9 cm)
23-13/16”
(60.4 cm)
24-3/4”
(62.9 cm)
82-7/8”
(210.5 cm)
min.
to
84-15/16”
(213.5 cm)
max.
82-7/8”
(210.5 cm)
min.
to
84-1/16”
(213.5 cm)
max.
75-15/16”
(192.9 cm)
3-1/2”
(8.9 cm)
75-15/16”
(192.9 cm)
3-1/2”
(8.9 cm)
36”
(91.5 cm)
Measurement varies
(locally supplied hardware)
Measurement varies
(locally supplied hardware)
30”
(76.2 cm)
29”
(73.7 cm)
23-13/16”
(60.4 cm)
24-3/4”
(62.9 cm)
Dimensions(All Refrigerator/Freezer)
20
Spe ifi ations(All Refrigerator/Freezer)
30” All Refrigerator/Freezer
Description DFFB304 DFRB304
Overall width 30” (76.2 m)
Overall height (from bottom) 82-3/4” (210.2 m) min. to 84-1/16” (213.5 m) max.
Overall depth (from rear) To front edge of side trim: 23-13/16” (60.5 m)
To front of top grille: 24-3/4” (62.9 m)
To front edge of door trim: 24” (61.0 m)
Cutout width 30” (76.2 m)
Cutout height 82-7/8” (210.5 m) min. to 84-1/16” (213.5 m) max.
Cutout depth 24” (61.0 m) min.*
Ele tri al requirements 115 volt, 60 Hz, 15 amp dedi ated ir uit; 3-wire ord with
grounded 3-prong plug atta hed to produ t
Maximum amp usage 9.9 amps
Inlet water 1/4” opper tubing inlet
requirements waterline; minimum 20 psi; N/A
maximum 120 psi
Overall interior dimensions
total apa ity 15.9 u. ft. (450 liters) 18.2 u. ft. (516 liters)
Maximum panel weight 50 lbs. (22.7 kg)
Approximate shipping weight 425 lbs. (193.2 kg)
36” All Refrigerator/Freezer
Description DFFB364 DFRB364
Overall width 36” (91.5 m)
Overall height (from bottom) 82-3/4” (210.2 m) min. to 84-1/16” (213.5 m) max.
Overall depth (from rear) To front edge of side trim: 23-13/16” (60.5 m)
To front of top grille: 24-3/4” (62.9 m)
To front edge of door trim: 24” (61.0 m)
Cutout width 36” (91.5 m)
Cutout height 82-7/8” (210.5 m) min. to 84-1/16” (213.5 m) max.
Cutout depth 24” (61.0 m) min.*
Ele tri al requirements 115 volt, 60 Hz, 15 amp dedi ated ir uit; 3-wire ord with
grounded 3-prong plug atta hed to produ t
Maximum amp usage 9.9 amps
Inlet water 1/4” opper tubing inlet
requirements waterline; minimum 20 psi; N/A
maximum 120 psi
Overall interior dimensions
total apa ity 19.1 u. ft. (541 liters) 22.8 u. ft. (646 liters)
Maximum panel weight 60 lbs. (27.2 kg)
Approximate shipping weight 500 lbs. (227.3 kg)
30” All Refrigerator/Freezer
36” All Refrigerator/Freezer
*Full overlay models fit flush in 25” (63.5 m) deep abinet openings. They an be installed in standard 24” (61.0 m)
deep openings. The door fa es and top grille will protrude 3/4” (1.9 m) into the room.

One 2”x 4” mounting board
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm),then shim
behind the mounting boards by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly underanti-tip board.
Anti-tip location
79-3/8”
(201.6 cm) min.
to bottom of
anti-tip board
80-1/2”
(204.6 cm) max.
to bottom of
anti-tip board
23”
(58.4 cm)
3-1/2”
(8.9 cm)
1-1/2”
(3.8 cm)
23
9”
(22.9 cm)
73-3/8”
(186.4 cm)
82-7/8”
(210.5 cm) min.
anti-tip board &
opening height
84-1/16”
(213.5 cm) max.
anti-tip board &
opening height
30”
(76.2 cm)
24”
(61.0 cm)
Electric outlet location
Water line entry area
Note: shown for All Freezer only
30”
(76.2 cm)
6-3/4”
(17.1 cm)
7-5/8”
(19.4 cm)
3”
(7.6 cm)
5/8”
(1.5 cm)
5/8”
(1.5 cm)
10-1/2”
(26.7 cm)
5/8”
(1.5 cm)
10-3/4”
(27.3 cm)
1”
(2.5 cm)
3-5/8”
(9.2 cm)
Optional floor
water line entry
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
22
Cutout Dimensions (All Refrigerator/Freezer)
30” All Refrigerator/Freezer
Anti-Tip Dimensions (All Refrigerator/Freezer)
30” All Refrigerator/Freezer

One 2”x 4” mounting voard
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm),then shim
behind the mounting boards by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly underanti-tip board.
Anti-tip location
79-3/8”
(201.6 cm) min.
to bottom of
anti-tip board
80-1/2”
(204.6 cm) max.
to bottom of
anti-tip board
29”
(73.7 cm)
3-1/2”
(8.9 cm)
1-1/2”
(3.8 cm)
25
9”
(22.9 cm)
73-3/8”
(186.4 cm)
82-7/8”
(210.5 cm) min.
anti-tip board &
opening height
84-1/16”
(213.5 cm) max.
anti-tip board &
opening height
36”
(91.5 cm)
24”
(61.0 cm)
Electric outlet location
Water line entry area
Note: shown for All Freezer only
36”
(91.5 cm)
6-3/4”
(17.1 cm)
7-5/8”
(19.4 cm)
3”
(7.6 cm)
5/8”
(1.5 cm)
5/8”
(1.5 cm)
10-1/2”
(26.7 cm)
5/8”
(1.5 cm)
10-3/4”
(27.3 cm)
1”
(2.5 cm)
3-5/8”
(9.2 cm)
Optional floor
water line entry
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
24
Cutout Dimensions (All Refrigerator/Freezer)
36” All Refrigerator/Freezer
Anti-Tip Dimensions (All Refrigerator/Freezer)
36” All Refrigerator/Freezer

75-15/16”
(192.9 cm)
3-1/2”
(8.9 cm)
30”
(76.2 cm)
29”
(73.7 cm)
29-1/2”
(74.9 cm)
1”
(2.54 cm)
between units
35”
(88.9 cm)
82-7/8”
(210.5 cm)
min.
to
84-15/16”
(213.5 cm)
max.
36”
(91.5 cm)
Measurement varies
(locally supplied hardware)
23-13/16”
(60.5 cm)
24-3/4”
(62.9 cm)
35-1/2”
(90.2 cm)
Dimensions (All Refrigerator/Freezer)
27
23-13/16”
(60.5 cm)
24-3/4”
(62.9 cm)
82-7/8”
(210.5 cm)
min.
to
84-15/16”
(213.5 cm)
max.
Measurement varies
(locally supplied hardware)
30”
(76.2 cm)
29”
(73.7 cm)
75-15/16”
(192.9 cm)
3-1/2”
(8.9 cm)
30”
(76.2 cm)
29”
(73.7 cm)
29-1/2”
(74.9 cm)
29-1/2”
(74.9 cm)
1”
(2.54 cm)
between units
Dimensions (All Refrigerator/Freezer)
26
Dual 30” All Refrigerator/Freezer Dual 30” and 36” All Refrigerator/Freezer

Spe ifi ations (All Refrigerator/Freezer)
29
75-15/16”
(192.9 cm)
3-1/2”
(8.9 cm)
1”
(2.54 cm)
between units
35”
(88.9 cm)
82-7/8”
(210.5 cm)
min.
to
84-15/16”
(213.5 cm)
max.
36”
(91.5 cm)
Measurement varies
(locally supplied hardware)
23-13/16”
(60.5 cm)
24-3/4”
(62.9 cm)
35-1/2”
(90.2 cm)
35-1/2”
(90.2 cm)
35”
(88.9 cm)
36”
(91.5 cm)
Dimensions (All Refrigerator/Freezer)
28
Dual All Refrigerator/Freezer
Description (2) 30” Units (1) 36” & (1) 30” Unit (2) 36” Units
Overall width 60” (152.4 m) 66” (167.6 m) 72” (182.9 m)
Overall height (from bottom) 82-3/4” (210.2 m) min. to 84-1/16” (213.5 m) max.
Overall depth (from rear) To front edge of side trim: 23-13/16” (60.5 m)
To front of top grille: 24-3/4” (62.9 m)
To front edge of door trim: 24” (61.0 m)
Cutout width 60” (152.4 m) 66” (167.6 m) 72” (182.9 m)
Cutout height 82-7/8” (210.5 m) min. to 84-1/16” (213.5 m) max.
Cutout depth 24” (61.0 m) min.*
Ele tri al requirements (2) 115 volt, 60 Hz, 15 amp dedi ated ir uit; 3-wire ord with
grounded 3-prong plug atta hed to produ t
Maximum amp usage 9.9 amps per unit
Inlet water requirements 1/4” opper tubing inlet waterline; minimum 20 psi;
(All Freezer only) maximum 120 psi
Overall interior dimensions
30” freezer 15.9 u. ft. (450 liters)
30” refrigerator 18.2 u. ft. (516 liters)
36” freezer 19.1 u. ft. (541 liters)
36” refrigerator 22.8 u. ft. (646 liters)
Maximum panel weight 30” freezer or refrigerator 50 lbs. (22.7 kg)
36” freezer or refrigerator 60 lbs. (27.2 kg)
Approximate shipping weight 30” freezer or refrigerator 425 lbs. (193.2 kg)
36” freezer or refrigerator 500 lbs. (227.3 kg)
Dual 36” All Refrigerator/Freezer
*Full overlay models fit flush in 25” (63.5 m) deep abinet openings. They an be installed in standard 24” (61.0 m)
deep openings. The door fa es and top grille will protrude 3/4” (1.9 m) into the room.

79-3/8”
(201.6 cm) min.
to bottom of
anti-tip board
80-1/2”
(204.6 cm) max.
to bottom of
anti-tip board
One 2”x 4” mounting board per unit
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm),then shim
behind the mounting boards by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly underanti-tip board.
Anti-tip location
23”
(58.4 cm)
3-1/2”
(8.9 cm)
1-1/2”
(3.8 cm)
23”
(58.4 cm)
31
9”
(22.9 cm)
73-3/8”
(186.4 cm)
82-7/8”
(210.5 cm) min.
anti-tip board &
opening height
84-1/16”
(213.5 cm) max.
anti-tip board &
opening height
60”
(152.4 cm)
24”
(61.0 cm)
Electric outlet location
Water line entry area
Note: Cutout opening shown with All Freezermodel on left.
Reverse waterline entry if All Freezer model is on right.
60”
(152.4 cm)
6-3/4”
(17.1 cm)
7-5/8”
(19.4 cm)
3”
(7.6 cm)
5/8”
(1.5 cm)
5/8”
(1.5 cm)
10-1/2”
(26.7 cm)
5/8”
(1.5 cm)
10-3/4”
(27.3 cm)
3-5/8”
(9.2 cm)
Optional floor
water line entry
1”
(2.5 cm)
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
30
Cutout Dimensions (All Refrigerator/Freezer)
Dual 30” All Refrigerator/Freezer
Anti-Tip Dimensions (All Refrigerator/Freezer)
Dual 30” All Refrigerator/Freezer

79-3/8”
(201.6 cm) min.
to bottom of
anti-tip board
80-1/2”
(204.6 cm) max.
to bottom of
anti-tip board
One 2”x 4” mounting board per unit
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm),then shim
behind the mounting boards by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly underanti-tip board.
Note: Dimensions shown for 36” All Freezer/All Refrigerator model on the left.
Reverse mounting boards if units are installed on the right.
Anti-tip location
29”
(73.7 cm)
3-1/2”
(8.9 cm)
1-1/2”
(3.8 cm)
23”
(58.4 cm)
33
9”
(22.9 cm)
73-3/8”
(186.4 cm)
82-7/8”
(210.5 cm) min.
anti-tip board &
opening height
84–1/16”
(213.5 cm) max.
anti-tip board &
opening height
66”
(167.6 cm)
24”
(61.0 cm)
Electric outlet location
Water line entry area
Note: Cutout opening shown with All Freezermodel on left.
Reverse waterline entry if All Freezer model is on right.
66”
(167.6 cm)
6-3/4”
(17.1 cm)
7-5/8”
(19.4 cm)
3”
(7.6 cm)
5/8”
(1.5 cm)
5/8”
(1.5 cm)
10-1/2”
(26.7 cm)
5/8”
(1.5 cm)
10-3/4”
(27.3 cm)
3-5/8”
(9.2 cm)
Optional floor
water line entry
1”
(2.5 cm)
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
32
Cutout Dimensions (All Refrigerator/Freezer)
Dual 30” and 36” All Refrigerator/Freezer
Anti-Tip Dimensions (All Refrigerator/Freezer)
Dual 30” and 36” All Refrigerator/Freezer

79-3/8”
(201.6 cm) min.
to bottom of
anti-tip board
80-1/2”
(204.6 cm) max.
to bottom of
anti-tip board
One 2”x 4” mounting board per unit
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm),then shim
behind the mountingboards by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly underanti-tip board.
Anti-tip location
29”
(73.7 cm)
3-1/2”
(8.9 cm)
1-1/2”
(3.8 cm)
29”
(73.7 cm)
Anti-Tip Dimensions (All Refrigerator/Freezer)
35
9”
(22.9 cm)
73-3/8”
(186.4 cm)
82-7/8”
(210.5 cm) min.
anti-tip board &
opening height
84-1/16”
(213.5 cm) max.
anti-tip board &
opening height
72”
(182.9 cm)
24”
(61.0 cm)
Electric outlet location
Water line entry area
Note: Cutout opening shown with All Freezermodel on left.
Reverse waterline entry if All Freezer model is on right.
72”
(182.9 cm)
6–3/4”
(17.1 cm)
7-5/8”
(19.4 cm)
3”
(7.6 cm)
5/8”
(1.5 cm)
5/8”
(1.5 cm)
10-1/2”
(26.7 cm)
5/8”
(1.5 cm)
10-3/4”
(27.3 cm)
3-5/8”
(9.2 cm)
Optional floor
water line entry
1”
(2.5 cm)
See anti-tip board installation
6”
(15.2 cm)
9”
(22.9 cm)
Cutout Dimensions (All Refrigerator/Freezer)
34
Dual 36” All Refrigerator/Freezer Dual 36” All Refrigerator/Freezer

1/2”
(1.27 cm)
1-1/2”
(3.81 cm)
1/4” Radius
(.64 cm)
2-3/4”
(6.98 cm)
1/2”
(1.27 cm)
3/4”
(1.90 cm)
1/2”
(1.27 cm)
1/8”
(.31 cm)
1/2”
(1.27 cm)
1/4” Radius 1/4” Radius
(1.2 cm)
(1.2 cm)
1/4” Radius
(.64 cm)
Reverse dimensions
for other end.
7/8”
(2.22 cm)
1/2”
(1.27 cm)
2-1/8”
(5.39 cm)
3-1/8”
(7.94 cm)
3-5/8”
(9.20 cm)
1-3/8”
(3.49 cm)
3/8”
(.95 cm)
3/8” Radius
3/8” Radius
(.95 cm)
(.95 cm)
3/8” Radius
(.95 cm)
29-1/2”
(74.93 cm)
1/2”
(1.27 cm)
3-1/8”
(7.93 cm)
Optional hinge cover
1/2”
(1.27 cm)
3-5/8”
(9.20 cm)
27-15/16”
(70.96 cm)
28”
(71.12 cm)
28”
(71.12 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
3-3/4”
(9.52 cm)
3-3/4”
(9.52 cm)
3”
(7.62 cm)
3”
(7.62 cm)
3/4”
(1.90 cm)
26-3/16”
(66.51 cm)
5-17/32”
(14.10 cm)
4-11/64”
(10.59 cm)
24-27/32”
(63.10 cm)
Custom Grille Dimensions (All Refrigerator/Freezer)
37
35-1/4”
(89.5 cm)
75-1/2”
(191.8 cm)
3/4”
(1.9 cm)
29-1/4”
(74.3 cm)
75-1/2”
(191.8 cm)
3/4”
(1.9 cm)
Overlay Dimensions(All Refrigerator/Freezer)
36
30” Custom Panels
36” Custom Panels
30” Custom Grille
Note: Hardware placement can vary depending on
single or dual installation.
Note: Panel overlays must be dry, solid, straight one
piece panels. The use of multiple panel pieces to
achieve the dimensions is not recommended.
Note: If 1/4” back panel is used, the dimensions are
1/4” smaller than the dimensions shown.