Viking RVEWD330 User manual

Features and Functions
•Temperature settings from 90 to 250 degrees F accommodate
all types of food
•Low setting is ideal for plate warming or bread proofing
•High setting keeps soups and sauces piping hot
•1.6 cubic ft. drawer capacity
– 20 1/2” wide
–6” high
– 22 3/4” deep
– Entire drawer is easily removable for cleaning
•Shipped with two removable stainless steel low racks and
removable stainless steel moisture cup
– Low racks cover entire bottom of pan for the largest loads
or remove one section for half coverage
–Moisture cup holds water to increase interior humidity
•Powerful 450-watt heating element
•Power “on” indicator light cycles on and off with heating
element
•Stainless steel roller-bearing glides for smooth drawer
operation
Multiple Design Options
•Standard or flush mount installation
•Warming Drawer can be installed flush to cabinet with
accessory flush mount installation kit
Installation Accessories
•Flush mount installation kit for warming drawer (D30FTW)
Finishes
•Available in Stainless Steel (SS), Black (BK), and White (WH)
Warranty Highlights
•Three-year full – complete product
•Ninety-day full – cosmetic parts such as glass, painted items,
and decorative items
•Lifetime limited – stainless steel exterior
•Five-year limited – heating elements
WARMING DRAWER
RVEWD330 – 30” WIDE
30” Wide Warming Drawer
®

F60268
Viking Range, LLC | 1-888-845-4641 or 662-455-1200
For detailed product information, model numbers, or to request a quote visit vikingrange.com
© 2013 Viking Range, LLC |Specifications subject to change without notice.
0713
®
DESCRIPTION 30” WIDE WARMING DRAWER
RVEWD330
Overall Width 29 1/2” (74.9 cm)
Overall Height 10” (25.4 cm)
Overall Depth from
Rear
To front edge of trim – 23 1/4” (59.1 cm)
To front edge of handle – 27 7/16” (68.7 cm)
With door open – 48” (121.9 cm)
Cutout Width Standard – 28 1/4” (71.8 cm)
Flush mount* – 29 5/8” (75.2 cm)
Cutout Height Standard – 9 1/4” (23.5 cm)
Flush mount* – 10 1/8” (25.7 cm)
Cutout Depth Standard – 23 1/2” (59.7 cm)
Flush mount* – 25 1/8” (63.8 cm)
Electrical Requirements 120VAC/60Hz – hard wire direct with separate 15-amp minimum 2-wire with ground circuit
Maximum Amp Usage 3.8 amps – 450 watts
Interior Dimensions
Width – 20 1/2” (52.1 cm)
Height – 6” (15.2 cm)
Depth – 22 3/4” (57.8 cm)
Overall Size – 1.6 cu. ft.
Approximate Shipping
Weight 90 lb. (40.5 kg)
*To install the warming drawer in a flush mount application, the flush mount accessory kit (D30FTW) is required.