Vimtag CM1 User manual

RESET
USB
Status Light Red Lights flash to green lights alternately
per three times.
Dear users,
Thank you for using our products, in order to offer the
perfect after-sales services, please read the description of
the product warranty card after purchasing and preserve it
properly.
1. Enjoy the free warranty in the warranty period and
preferential services outside the warranty period.
2. Products enjoy a free 7-day replacement, one-year
warranty period.
3. Users who purchase products in 7 days with equipment
performance problems, and no scratches in
appearance, can be directly replaced with new ones.
Confirming the faults during the warranty replacement
days after the detection by our company, will be replaced
with the same type of products; Trouble-free products
will be returned originally.
Cloud IP Camera
CM1 Series
Quick Installation Guide
Thank you for using Vimtag Cloud IP Camera, Please
follow these steps.
Product Diagram
Status Light
Lens
Light Sensor
Micro SD
Card Slot
Micro SD Card Slot
USB
IR LEDS
Microphone
Description Introduction Description Introduction
IR LEDS Additional light in low-light conditions.
Support Micro SD Card Storage ( up to 64G). Power interface.
RESET Long press RESET button when device is
running normal and after hear the hint tone,
device will restore factory settings and restart
Warranty
1 2
V1.1

Create Username
Add Device
Add Device
Using the USB data line to connect the device and power
adapter ,and link the power, when the indicator light is in
the red light, the green light flashes alternately every three
times, means the equipment complete.
First, install app on your phone, then log in. New 'Vimtag'
user needs to register an account to finish this step.
Power
4. The following situations are in the free maintenance range,
we only provide paid services, please pay attention:
· Failure to follow the operation manual requires for
installation, application, maintenance and custody
leading to products failure or damage;
· Already out of warranty period;
· Disassemble unauthorized repair;
· The products damage caused by the unexpected
factors or human behaviors, such as improper input
voltage, high temperature, water, mechanical damage,
and severe oxidation or rust;
· Due to the fore majeure such as earthquakes, fires,
floods, lightning strikes leading to the products failure
or damage.
5. The final interpretation and modify right in the warranty
card belongs to our company.
Connect Camera
3 4 5
Vimtag APP Installation
A.Scan 'Vimtag' APP QR code.
B. Download 'Vimtag' APP from APP Store(iOS ) or Play
Store(Android).
Mobile Phone APP
PC APP
PC users pls download it as:http://vimtag.com/download/
1. Assemble the camera and connect to power, download
the Vimtag APP, then register an account and login in.
2. Enter 'Device List' and click '+' icon at the top of left
corner. Then scan the QR code (or enter the ID code
in the lable directly) to finish the 'add devices'.
Note: This camera only support the Wi-Fi connection,
don't support etherner connection.
ID