Vimtag P1 User manual

Lens
IR LEDS
IR LEDS
Light Sensor
Light Sensor
Speaker
Speaker
Microphone
Microphone
Adapter
Micro SD
Card Slot
Micro SD Card Slot
FN Button
FN Button
RESET
Infrared light adjustment.
Audio from the APP side.
Supply light under low-light condition
To connect Ethernet and Power.
Transfer the voice to vimtag APP.
Reserved function key.
Support Micro SD Card Storage ( up to 64G).
Long press RESET button when device is running
normal and after hear the hint tone, device will restore
factory settings and restart
Product Diagram
Adapter
RESET
RESRT D C 5V FN
Cloud IP Camera
P1 Series
Quick Installation Guide
Description Introduction Description Introduction
Thank you for using Vimtag Cloud IP Camera, Please
follow these steps.
Ethernet Indicator
Light
Wi-Fi Indicator
Light
Green light flashes 3 times that shows Ethernet
connection successfully.
Green light flashes 3 times that shows Wi-Fi
connection successfully.
Ethernet Indicator
Light
Wi-Fi Indicator
Light
Reset needle For clicking the reset hole
Reset needle
‘Vimtag’ APP Installation
A.Scan 'Vimtag' APP QR code.
B. Download 'Vimtag' APP from APP Store(iOS ) or Play Store(Android).
Note: PC users pls download it as：http://vimtag.com/download/
Add Camera to APP
Power
Router
Phone
Router
Power
1. Connect cable and click the Ethernet icon.
2. When Ethernet indicator light flashes three times in green every three seconds,
which means the camera is connected to network successfully.
Method 1: Ethernet connection
Method 2: Wi-Fi connection
Network Connection
V1.1
Click the Wi-Fi connection icon, operate it uder the APP instrutions.
Note: please press RESET button for 1 second before operate, then can enter
the Wi-Fi configuration mode.
1. Assemble the camera and connect to power, download the Vimtag APP, then
register an account and login in.
2. Enter 'Device List' and click '+' icon at the top of left corner. Then scan the QR
code (or enter the ID code in the lable directly) to finish the 'add devices'.

Lens
IR LEDS
IR LEDS
Light Sensor
Light Sensor
Speaker
Speaker
Microphone
Microphone
Adapter
Micro SD
Card Slot
Micro SD Card Slot
FN Button
FN Button
RESET
Infrared light adjustment.
Audio from the APP side.
Supply light under low-light condition
To connect Ethernet and Power.
Transfer the voice to vimtag APP.
Reserved function key.
Support Micro SD Card Storage ( up to 64G).
Long press RESET button when device is running
normal and after hear the hint tone, device will restore
factory settings and restart
Product Diagram
Adapter
RESET
RESRT D C 5V FN
Cloud IP Camera
P1 Series
Quick Installation Guide
Description Introduction Description Introduction
Thank you for using Vimtag Cloud IP Camera, Please
follow these steps.
Ethernet Indicator
Light
Wi-Fi Indicator
Light
Green light flashes 3 times that shows Ethernet
connection successfully.
Green light flashes 3 times that shows Wi-Fi
connection successfully.
Ethernet Indicator
Light
Wi-Fi Indicator
Light
Reset needle For clicking the reset hole
Reset needle
‘Vimtag’ APP Installation
A.Scan 'Vimtag' APP QR code.
B. Download 'Vimtag' APP from APP Store(iOS ) or Play Store(Android).
Note: PC users pls download it as：http://vimtag.com/download/
Add Camera to APP
Power
Router
Phone
Router
Power
1. Connect cable and click the Ethernet icon.
2. When Ethernet indicator light flashes three times in green every three seconds,
which means the camera is connected to network successfully.
Method 1: Ethernet connection
Method 2: Wi-Fi connection
Network Connection
V1.1
Click the Wi-Fi connection icon, operate it uder the APP instrutions.
Note: please press RESET button for 1 second before operate, then can enter
the Wi-Fi configuration mode.
1. Assemble the camera and connect to power, download the Vimtag APP, then
register an account and login in.
2. Enter 'Device List' and click '+' icon at the top of left corner. Then scan the QR
code (or enter the ID code in the lable directly) to finish the 'add devices'.

Lens
IR LEDS
IR LEDS
Light Sensor
Light Sensor
Speaker
Speaker
Microphone
Microphone
Adapter
Micro SD
Card Slot
Micro SD Card Slot
FN Button
FN Button
RESET
Infrared light adjustment.
Audio from the APP side.
Supply light under low-light condition
To connect Ethernet and Power.
Transfer the voice to vimtag APP.
Reserved function key.
Support Micro SD Card Storage ( up to 64G).
Long press RESET button when device is running
normal and after hear the hint tone, device will restore
factory settings and restart
Product Diagram
Adapter
RESET
RESRT D C 5V FN
Cloud IP Camera
P1 Series
Quick Installation Guide
Description Introduction Description Introduction
Thank you for using Vimtag Cloud IP Camera, Please
follow these steps.
Ethernet Indicator
Light
Wi-Fi Indicator
Light
Green light flashes 3 times that shows Ethernet
connection successfully.
Green light flashes 3 times that shows Wi-Fi
connection successfully.
Ethernet Indicator
Light
Wi-Fi Indicator
Light
Reset needle For clicking the reset hole
Reset needle
‘Vimtag’ APP Installation
A.Scan 'Vimtag' APP QR code.
B. Download 'Vimtag' APP from APP Store(iOS ) or Play Store(Android).
Note: PC users pls download it as：http://vimtag.com/download/
Add Camera to APP
Power
Router
Phone
Router
Power
1. Connect cable and click the Ethernet icon.
2. When Ethernet indicator light flashes three times in green every three seconds,
which means the camera is connected to network successfully.
Method 1: Ethernet connection
Method 2: Wi-Fi connection
Network Connection
V1.1
Click the Wi-Fi connection icon, operate it uder the APP instrutions.
Note: please press RESET button for 1 second before operate, then can enter
the Wi-Fi configuration mode.
1. Assemble the camera and connect to power, download the Vimtag APP, then
register an account and login in.
2. Enter 'Device List' and click '+' icon at the top of left corner. Then scan the QR
code (or enter the ID code in the lable directly) to finish the 'add devices'.

Lens
IR LEDS
IR LEDS
Light Sensor
Light Sensor
Speaker
Speaker
Microphone
Microphone
Adapter
Micro SD
Card Slot
Micro SD Card Slot
FN Button
FN Button
RESET
Infrared light adjustment.
Audio from the APP side.
Supply light under low-light condition
To connect Ethernet and Power.
Transfer the voice to vimtag APP.
Reserved function key.
Support Micro SD Card Storage ( up to 64G).
Long press RESET button when device is running
normal and after hear the hint tone, device will restore
factory settings and restart
Product Diagram
Adapter
RESET
RESRT D C 5V FN
Cloud IP Camera
P1 Series
Quick Installation Guide
Description Introduction Description Introduction
Thank you for using Vimtag Cloud IP Camera, Please
follow these steps.
Ethernet Indicator
Light
Wi-Fi Indicator
Light
Green light flashes 3 times that shows Ethernet
connection successfully.
Green light flashes 3 times that shows Wi-Fi
connection successfully.
Ethernet Indicator
Light
Wi-Fi Indicator
Light
Reset needle For clicking the reset hole
Reset needle
‘Vimtag’ APP Installation
A.Scan 'Vimtag' APP QR code.
B. Download 'Vimtag' APP from APP Store(iOS ) or Play Store(Android).
Note: PC users pls download it as：http://vimtag.com/download/
Add Camera to APP
Power
Router
Phone
Router
Power
1. Connect cable and click the Ethernet icon.
2. When Ethernet indicator light flashes three times in green every three seconds,
which means the camera is connected to network successfully.
Method 1: Ethernet connection
Method 2: Wi-Fi connection
Network Connection
V1.1
Click the Wi-Fi connection icon, operate it uder the APP instrutions.
Note: please press RESET button for 1 second before operate, then can enter
the Wi-Fi configuration mode.
1. Assemble the camera and connect to power, download the Vimtag APP, then
register an account and login in.
2. Enter 'Device List' and click '+' icon at the top of left corner. Then scan the QR
code (or enter the ID code in the lable directly) to finish the 'add devices'.

Lens
IR LEDS
IR LEDS
Light Sensor
Light Sensor
Speaker
Speaker
Microphone
Microphone
Adapter
Micro SD
Card Slot
Micro SD Card Slot
FN Button
FN Button
RESET
Infrared light adjustment.
Audio from the APP side.
Supply light under low-light condition
To connect Ethernet and Power.
Transfer the voice to vimtag APP.
Reserved function key.
Support Micro SD Card Storage ( up to 64G).
Long press RESET button when device is running
normal and after hear the hint tone, device will restore
factory settings and restart
Product Diagram
Adapter
RESET
RESRT D C 5V FN
Cloud IP Camera
P1 Series
Quick Installation Guide
Description Introduction Description Introduction
Thank you for using Vimtag Cloud IP Camera, Please
follow these steps.
Ethernet Indicator
Light
Wi-Fi Indicator
Light
Green light flashes 3 times that shows Ethernet
connection successfully.
Green light flashes 3 times that shows Wi-Fi
connection successfully.
Ethernet Indicator
Light
Wi-Fi Indicator
Light
Reset needle For clicking the reset hole
Reset needle
‘Vimtag’ APP Installation
A.Scan 'Vimtag' APP QR code.
B. Download 'Vimtag' APP from APP Store(iOS ) or Play Store(Android).
Note: PC users pls download it as：http://vimtag.com/download/
Add Camera to APP
Power
Router
Phone
Router
Power
1. Connect cable and click the Ethernet icon.
2. When Ethernet indicator light flashes three times in green every three seconds,
which means the camera is connected to network successfully.
Method 1: Ethernet connection
Method 2: Wi-Fi connection
Network Connection
V1.1
Click the Wi-Fi connection icon, operate it uder the APP instrutions.
Note: please press RESET button for 1 second before operate, then can enter
the Wi-Fi configuration mode.
1. Assemble the camera and connect to power, download the Vimtag APP, then
register an account and login in.
2. Enter 'Device List' and click '+' icon at the top of left corner. Then scan the QR
code (or enter the ID code in the lable directly) to finish the 'add devices'.

PM
About
SD card
Schedule recording
Network
Motion and Notification
Check the camera's
software version and ID number.
Support up to 64G SD card storage.
Set the recording schedule
start and end time.
Can set up the camera W i-Fi
connection.
Set the motion detection alarm.
Could be storaged with
Cloud Box.
Storage Device
Add device
Alarm messages
Add your cloud camera to
your account through the icon.
When camera has set the motion
detection alarm, you can receive
the alarm message.
Device list View the video Check the video and alarm message
Sign in
Sign up
Create Username & Sign in
Click to register the username.
Login your existing username.
Local video Screen setting
Two-way audio
Photograph
View the video records
and alarm messages
Voice
Take a video for the monitoring
screen,when returning to the
monitoring video, that is the
end of the recording.
Speak when pressing the
two-way audio button.
Can take a real time photo when
viewing the video.
Click the icon to view the video
recording and alarm message.
Turn on the mic and speaker
then speak .
Device settings
It provides personalized
settings.
Adjust the camera mode,
brightness, contrast,
saturation, sharpness.
Device settings
Enter into the interface of ‘information and video viewing’ can see the alarm
information and video of storage device (Micro SD or cloud box), users can
quickly search the information and video by choose the time or category.
New Account - Select ‘Sign up’ from the Home Screen, input a username
and password of your choice, confirm the password. Select ‘Sign up’.
Existing Account – Input existing Username and password. Press ‘Sign in’.
When you login to the account and access the device list, it will show multiple
cameras you have added at the same time. You can also use 'Add device' setting
and check the 'alarm message' on the interface.
Click the camera icon so that you can view the camera video, after you login to
the device list, you can skip the screen to control horizontal and vertical rotation.
You can also operate the 'video photo', 'Two-way audio' and 'setting'.
Access the settings interface, you can set all specifications and functions
of the camera. Such as: check camera details, change your password or
configure the camera network. You can manage the specifications and
functions based on your requirements.
Time
Quickly search record time.
Category
Select alarm information
or video.
Record/Photo
Chick to view the vedio or
photo, video with video
mark, photo without.
Account
Manage personal account or the
cloud IP camera's video by mobile
storage.
Try it
Click it for free Experience.
Note: For Vimtag APP upadtes continuously , there may be operational guidelines do not same as the APP UI, the
latest operational guidelines please login our official website www.vimtag.com to download and read.

PM
About
SD card
Schedule recording
Network
Motion and Notification
Check the camera's
software version and ID number.
Support up to 64G SD card storage.
Set the recording schedule
start and end time.
Can set up the camera W i-Fi
connection.
Set the motion detection alarm.
Could be storaged with
Cloud Box.
Storage Device
Add device
Alarm messages
Add your cloud camera to
your account through the icon.
When camera has set the motion
detection alarm, you can receive
the alarm message.
Device list View the video Check the video and alarm message
Sign in
Sign up
Create Username & Sign in
Click to register the username.
Login your existing username.
Local video Screen setting
Two-way audio
Photograph
View the video records
and alarm messages
Voice
Take a video for the monitoring
screen,when returning to the
monitoring video, that is the
end of the recording.
Speak when pressing the
two-way audio button.
Can take a real time photo when
viewing the video.
Click the icon to view the video
recording and alarm message.
Turn on the mic and speaker
then speak .
Device settings
It provides personalized
settings.
Adjust the camera mode,
brightness, contrast,
saturation, sharpness.
Device settings
Enter into the interface of ‘information and video viewing’ can see the alarm
information and video of storage device (Micro SD or cloud box), users can
quickly search the information and video by choose the time or category.
New Account - Select ‘Sign up’ from the Home Screen, input a username
and password of your choice, confirm the password. Select ‘Sign up’.
Existing Account – Input existing Username and password. Press ‘Sign in’.
When you login to the account and access the device list, it will show multiple
cameras you have added at the same time. You can also use 'Add device' setting
and check the 'alarm message' on the interface.
Click the camera icon so that you can view the camera video, after you login to
the device list, you can skip the screen to control horizontal and vertical rotation.
You can also operate the 'video photo', 'Two-way audio' and 'setting'.
Access the settings interface, you can set all specifications and functions
of the camera. Such as: check camera details, change your password or
configure the camera network. You can manage the specifications and
functions based on your requirements.
Time
Quickly search record time.
Category
Select alarm information
or video.
Record/Photo
Chick to view the vedio or
photo, video with video
mark, photo without.
Account
Manage personal account or the
cloud IP camera's video by mobile
storage.
Try it
Click it for free Experience.
Note: For Vimtag APP upadtes continuously , there may be operational guidelines do not same as the APP UI, the
latest operational guidelines please login our official website www.vimtag.com to download and read.

PM
About
SD card
Schedule recording
Network
Motion and Notification
Check the camera's
software version and ID number.
Support up to 64G SD card storage.
Set the recording schedule
start and end time.
Can set up the camera W i-Fi
connection.
Set the motion detection alarm.
Could be storaged with
Cloud Box.
Storage Device
Add device
Alarm messages
Add your cloud camera to
your account through the icon.
When camera has set the motion
detection alarm, you can receive
the alarm message.
Device list View the video Check the video and alarm message
Sign in
Sign up
Create Username & Sign in
Click to register the username.
Login your existing username.
Local video Screen setting
Two-way audio
Photograph
View the video records
and alarm messages
Voice
Take a video for the monitoring
screen,when returning to the
monitoring video, that is the
end of the recording.
Speak when pressing the
two-way audio button.
Can take a real time photo when
viewing the video.
Click the icon to view the video
recording and alarm message.
Turn on the mic and speaker
then speak .
Device settings
It provides personalized
settings.
Adjust the camera mode,
brightness, contrast,
saturation, sharpness.
Device settings
Enter into the interface of ‘information and video viewing’ can see the alarm
information and video of storage device (Micro SD or cloud box), users can
quickly search the information and video by choose the time or category.
New Account - Select ‘Sign up’ from the Home Screen, input a username
and password of your choice, confirm the password. Select ‘Sign up’.
Existing Account – Input existing Username and password. Press ‘Sign in’.
When you login to the account and access the device list, it will show multiple
cameras you have added at the same time. You can also use 'Add device' setting
and check the 'alarm message' on the interface.
Click the camera icon so that you can view the camera video, after you login to
the device list, you can skip the screen to control horizontal and vertical rotation.
You can also operate the 'video photo', 'Two-way audio' and 'setting'.
Access the settings interface, you can set all specifications and functions
of the camera. Such as: check camera details, change your password or
configure the camera network. You can manage the specifications and
functions based on your requirements.
Time
Quickly search record time.
Category
Select alarm information
or video.
Record/Photo
Chick to view the vedio or
photo, video with video
mark, photo without.
Account
Manage personal account or the
cloud IP camera's video by mobile
storage.
Try it
Click it for free Experience.
Note: For Vimtag APP upadtes continuously , there may be operational guidelines do not same as the APP UI, the
latest operational guidelines please login our official website www.vimtag.com to download and read.

PM
About
SD card
Schedule recording
Network
Motion and Notification
Check the camera's
software version and ID number.
Support up to 64G SD card storage.
Set the recording schedule
start and end time.
Can set up the camera W i-Fi
connection.
Set the motion detection alarm.
Could be storaged with
Cloud Box.
Storage Device
Add device
Alarm messages
Add your cloud camera to
your account through the icon.
When camera has set the motion
detection alarm, you can receive
the alarm message.
Device list View the video Check the video and alarm message
Sign in
Sign up
Create Username & Sign in
Click to register the username.
Login your existing username.
Local video Screen setting
Two-way audio
Photograph
View the video records
and alarm messages
Voice
Take a video for the monitoring
screen,when returning to the
monitoring video, that is the
end of the recording.
Speak when pressing the
two-way audio button.
Can take a real time photo when
viewing the video.
Click the icon to view the video
recording and alarm message.
Turn on the mic and speaker
then speak .
Device settings
It provides personalized
settings.
Adjust the camera mode,
brightness, contrast,
saturation, sharpness.
Device settings
Enter into the interface of ‘information and video viewing’ can see the alarm
information and video of storage device (Micro SD or cloud box), users can
quickly search the information and video by choose the time or category.
New Account - Select ‘Sign up’ from the Home Screen, input a username
and password of your choice, confirm the password. Select ‘Sign up’.
Existing Account – Input existing Username and password. Press ‘Sign in’.
When you login to the account and access the device list, it will show multiple
cameras you have added at the same time. You can also use 'Add device' setting
and check the 'alarm message' on the interface.
Click the camera icon so that you can view the camera video, after you login to
the device list, you can skip the screen to control horizontal and vertical rotation.
You can also operate the 'video photo', 'Two-way audio' and 'setting'.
Access the settings interface, you can set all specifications and functions
of the camera. Such as: check camera details, change your password or
configure the camera network. You can manage the specifications and
functions based on your requirements.
Time
Quickly search record time.
Category
Select alarm information
or video.
Record/Photo
Chick to view the vedio or
photo, video with video
mark, photo without.
Account
Manage personal account or the
cloud IP camera's video by mobile
storage.
Try it
Click it for free Experience.
Note: For Vimtag APP upadtes continuously , there may be operational guidelines do not same as the APP UI, the
latest operational guidelines please login our official website www.vimtag.com to download and read.

PM
About
SD card
Schedule recording
Network
Motion and Notification
Check the camera's
software version and ID number.
Support up to 64G SD card storage.
Set the recording schedule
start and end time.
Can set up the camera W i-Fi
connection.
Set the motion detection alarm.
Could be storaged with
Cloud Box.
Storage Device
Add device
Alarm messages
Add your cloud camera to
your account through the icon.
When camera has set the motion
detection alarm, you can receive
the alarm message.
Device list View the video Check the video and alarm message
Sign in
Sign up
Create Username & Sign in
Click to register the username.
Login your existing username.
Local video Screen setting
Two-way audio
Photograph
View the video records
and alarm messages
Voice
Take a video for the monitoring
screen,when returning to the
monitoring video, that is the
end of the recording.
Speak when pressing the
two-way audio button.
Can take a real time photo when
viewing the video.
Click the icon to view the video
recording and alarm message.
Turn on the mic and speaker
then speak .
Device settings
It provides personalized
settings.
Adjust the camera mode,
brightness, contrast,
saturation, sharpness.
Device settings
Enter into the interface of ‘information and video viewing’ can see the alarm
information and video of storage device (Micro SD or cloud box), users can
quickly search the information and video by choose the time or category.
New Account - Select ‘Sign up’ from the Home Screen, input a username
and password of your choice, confirm the password. Select ‘Sign up’.
Existing Account – Input existing Username and password. Press ‘Sign in’.
When you login to the account and access the device list, it will show multiple
cameras you have added at the same time. You can also use 'Add device' setting
and check the 'alarm message' on the interface.
Click the camera icon so that you can view the camera video, after you login to
the device list, you can skip the screen to control horizontal and vertical rotation.
You can also operate the 'video photo', 'Two-way audio' and 'setting'.
Access the settings interface, you can set all specifications and functions
of the camera. Such as: check camera details, change your password or
configure the camera network. You can manage the specifications and
functions based on your requirements.
Time
Quickly search record time.
Category
Select alarm information
or video.
Record/Photo
Chick to view the vedio or
photo, video with video
mark, photo without.
Account
Manage personal account or the
cloud IP camera's video by mobile
storage.
Try it
Click it for free Experience.
Note: For Vimtag APP upadtes continuously , there may be operational guidelines do not same as the APP UI, the
latest operational guidelines please login our official website www.vimtag.com to download and read.