Vipera D10+ User manual

OPERATION MANUAL V.2.1
Authorized Dealer – Sales and Support

Username: root Password: ltc@dog
Connect the unit to your local network using an RJ45 cable or RJ45 to your wireless hotspot,
and in a web browser on mobile device or desktop type 192.168.1.100 or on your router’s
network setting, identify the IP address that has been automatically assigned by your machine
by scanning the network devices. If the dashboard is showing in simplified Chinese, you can
switch to English in chrome auto translate function.
1. Miner pool configuration:
The mining machine supports filling in up to three ore pool addresses, with the following
priorities: pool 1> pool 2> pool 3
You can choose any compatible LTC mining pool.
2. Fan custom speed
By default, the fan automatically adjusts the fan speed according to the temperature of the
mining machine operation board The user can also customize the fan speed to make the fan
run at a fixed speed, which can be configured according to the percentage of the maximum

fan speed.
3. Low power consumption mode
The mining machine runs in the high power consumption mode by default. Users can also
check the low power consumption mode to make the mining machine run in the low power
consumption mode.
4.Custom voltage and frequency
Users can also define the operating frequency and output voltage of the mining machine
Check the user-defined voltage and manually configure the voltage and frequency
parameters.
For example, 1300 represents 13v voltage output, 500 represents that the operating clock of
mining machine chip is 500M

5. Custom Memory Parameters
It is not recommended to modify this parameter. 128 is the best memory parameter value
obtained through testing
6.network configuration
The default mining machine network is dhcp, and the network configuration is automatically
obtained through the dhcp protocol. You can also manually configure the mining machine to
obtain a static IP address by selecting static as the network protocol. The configuration
information includes the IP address, subnet mask, gateway and DNS server address.
7. Update Firmware
A. SD card upgrade
Get the latest SD card upgrade package from the the Vipera product listing (Hammer D10+
downloads tab), copy it into the SD card (FAT format), insert the SD card into the master SD

card slot, and power on. The traffic lights of the mine stop flash at the same time, indicating
that the SD card upgrade is completed. Pull out the SD card after shutdown
B. Network upgrade package
Obtain the latest network upgrade package from the official website, select the upgrade
package through the web page, click Upload, and select Confirm.
The "Keep Settings" option indicates whether to save the current configuration information
of the mining machine after the upgrade. If it is not checked, the mining pool, wallet and
other information in the mining machine will be restored to the factory default settings after
the upgrade.
For further assistance call our toll-free number 1-877-446-5697 or speak to
our live chat agent.