Vision Tech Shop TVP Series User manual

TVP Series Quick Start Guide
1. Connect the TVP series scale and DLP-50 label printer with their corresponding power
adapters. The power adapter for the DLP-50 or DEP-50 has a white label attached to the cord.
Do not swap the power adapters.
2. Connect both devices with the RS-232 cable.

3. Before printing, place an object on scale and print. The object must weigh more than the
minimum capacity printed on the side of the TVP-B
4. Enter the unit price of object. Afterwards, press to print.

Scale Parameter Settings
Accessing the Menu
1. Turn on the scale. Press and hold key during the self-test.
Display will show “Pn” briefly PIN is activated. Press the PIN number to get into the parameter
menu.
2. The default PIN number is “0000”
3. Press numeric key 0 four times, display will be shown Pn - - - -
4. Press key to confirm, it will enter into the parameter settings and will to show “menu unit
kg”.
5. Navigate through the menu using the and keys, select menu “F11 rS232” using
the key, to escape the menu, press .
6. The following graph indicates the display and function of each menu within “F11 rS232”:
F11 rS232 ModE
PC-100 Protocol Type: CAS
printr
The scale RS232 protocol will be
determined by the Baud & Pr
settings
EP50
accumulation function enable,
and press M+ key to send data to
receipt printer
Lp50
(default)
accumulation function enable,
and press M+ key to send data to
label printer
POS Protocol Type: POS
oFF RS232 function disable
Cont Continues data transmission
StC Stable data sending continues

toledo Protocol Type 1: Toledo
nciecr Protocol Type 2: NCI-ECR
ncigen Protocol Type 3: NCI-General
tec Protocol Type 4: TEC
easy Protocol Type 5: Easy Weigh
Baud
(default: 9600)
Set baud rate
to(1200/2400/4800/9600/19200/38
400/115200)
Pr
8n1
(default) 8 data bits, no verify, 1 stop bit
7E1 7 data bits, Even verify, 1 stop bit
7o1 7 data bits, Odd verify, 1 stop bit
7. Press key to choose "kg”, "lb" or "oz” unit in normal weighing mode, capacity will be
show in kg, lb or oz values.
Scan the QR code for a video tutorial
If you have more questions, please contact us anytime at:
[email protected] or
www.VisionTechShop.com
1.201.679.7793