VisionAid HandyReader HD User manual

VisionAid - HandyReader HD v2
Quick Reference Guide
Front
Top
Freeze: Quick press
Reading Line On / Off: Press & hold 2 secs
to cycle between horizontal, vertical & off
Select / Deselect: Quick press when in Menu
Left LED
Green:
On
Right LED
Red: Charging
Off: Charged
On / Off:
Press &
hold for 2
secs
Settings Menu: Press & hold for
2 seconds to open & close
In Menu: Quick press to cycle
through options
Change Colour
(M): Quick press
Zoom In / Out:
Press & hold
Adjust Reading
Line: Press & hold
whilst line flashes
on screen

Reading stand: To
raise the reading
stand, insert your
finger into the cut out
& gently lift it upwards
TV Out: Connect the included TV out
cable to this socket & your television
to magnify onto your television screen
Ensure your HandyReader HD &
television are switched on. Then
ensure you set your television to the
correct source (normally A/V)
DC In: To recharge
your unit, insert the
plug gently into
this socket
Lanyard
bar
Back
Bottom
VisionAid International Ltd Tel: [phone]
Bridge Lodge, Spalding Common, Email: [e-mail]
Spalding, Lincolnshire, PE11 3AU Web: www.visionaid.com