VisionAid Eye-D User manual

Eye-D v2 Quick Reference Guide
Revision B
Left
Zoom In:
Press & hold
Adjust reading line:
Press & hold while
line flashing
Change Colour
Mode:
Quick press
Settings Menu:
Press & hold
Front
Zoom Out:
Press & hold
Adjust reading line:
Press & hold while
line flashing
Freeze / Unfreeze: Quick press
Cycle Reading Lines: Press & hold.
Horizontal, vertical and off.
USB C Charging Port

Handle:
Unfold by
gently pivoting
the handle
away from unit
Settings Menu
Access by pressing & holding the Change Colour Mode button.
When in Settings menu, quick press to cycle through options:
screen brightness, LED brightness, volume, date / time,
enabled colour modes, battery and firmware version.
Depending on the currently selected option, press the zoom in
and out buttons or the freeze button to change it.
Top
TV Out: Connect the included TV out cable to
this socket & your television to enjoy Eye-D v2’s
image on your television screen.
Ensure they are both turned on and set your
television to the correct source (normally A/V).
Full reset:
Press with
paperclip
On / off:
Press & hold
1 second
Battery Indicator LED:
Green – unit is on
Flashing - battery needs
recharging
Red - battery is recharging
Off - fully recharged