VISIONARY DESIGNS MOD-1371M User manual

© 2018
Order #XXXXX
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at [email protected]
MOD-1371M Microsoft Kiosk
Mount
Plate
Rotate shell to turn
tablet from portrait to
landscape orientation.
Post Rotates
Completed Assembly
Tablet Shell
Set
Screw
Post Post
Steps:
1) Attach mount plate to post, using set screw.
NOTE: Mount Plate must rotate to left and right before installing Shell.
2) Attach base to post, using bolt.
3) Attach shell to mount plate, using hex nuts.
4) Insert tablet in shell and route cord through post. See Tablet Shell detail.
Shell
Cord
Access
Shell
Cover
Tablet
Base
Base Attachment
to power
Mount
Plate
Shell
Hex
Nut

© 2018
Order #XXXXX
DO NOT USE POWER TOOLS
ALL CONNECTIONS MUST
BE TIGHTLY SECURED
Part Identification - Numbering
Spline Connection Base Plate & Extrusion Connection
General Setup Instructions
- Read entire setup instruction manual prior to
unpacking parts and pieces.
- The setup instructions are created specifically
for this configuration.
- Setup instructions are laid out sequentially in
steps, including exploded views with detailed
explanation for assembly.
WARNING
Cleaning & Packing
- For Cleaning Metal, Plex, & Laminate Parts:
Use a MILD NON-ABRASIVE cleanser and
soft cloth/paper towel to clean all surfaces.
- Keep exhibit components away from heat
and prolonged sun exposure.
Heat and UV exposure will warp and
fade components.
- Retain all provided Packing Materials.
All provided packing materials are for
ease of repacking & component protection.
Disassembly
- For loss prevention, tighten all setscrews
and locks during disassembly
7A
Hex Tool - Essential for Assembly
Extrusion & Lock Connection Engaged Lock
LADDERS OR LIFTS
MAY BE REQUIRED
General Information