Vista SmartDisc 02 VLS-02DR Series Service manual

Installation & Instruction Manual 1.38
Vista SmartDisc 02
Digital Video Recorder/Transmitter
VLS-02DR-Series

SmartDisc 02
(English) Version1.38
Device Manual

Vista SmartDisc 02 3
Vista SmartDisc 02
Device Manual


4Vista SmartDisc 02
Limited Warranty
ThisVistahandbookdocumentsthecurrenttechnicalstateofthedescribed
products.Weattempttodescribethemasthoroughlyandexplicitlyaspossibleto
makeworkingwithourproductsassimpleaspossible.Thismanualmay
neverthelessincludetechnicalinexactitudesandmisprints.Duetothespeedof
technologicaldevelopment,wereservetherighttoincludetechnicalalterations
anddevelopmentswithoutspecialadvancenotice.
Vistathereforedoesnotmakeanywarrantywithrespecttothismanualorthe
continuingvalidityofthesetexts.
Furthermore,Vistaisnotliableforanylossormisuseofinformationresultingfrom
theuseofthismanual.Inparticular,Vistaisnotliableforanydamagessuchas
financiallossesordelayedorterminatedbusinessresultingfromtheuseormisuse
ofthismanual,evenifVistaorarepresentativeofVistawasmadeawareofthe
possibilityofsuchdamage.Ourlegalliabilityforcompensationforintentor
culpablenegligencearenotaffected.
Vistadoesnotacceptanyliabilityfordetailsinthismanualconcerningthefreedom
tousecommerciallyprotectedrights(trademarks,patents,registereddesigns,etc.).
Therightstotrademarks,tradenames,proprietarynamesandarticlenames
reproducedinthismanualarereservedandareprotectedbytherelevantlaws
governingtradenames,patents,registereddesignsandindustrialdesigns.
Thisdocumentationmaynotbecopied,translated,duplicatedortransferredinany
otherwaytoelectronicmediaoranyotherdevice,eithercompletelyorpartially,
withoutpreviouswrittenpermissionfromVista.
ThegeneraltermsofdeliveryandpaymentandthetermsoflicenceofVistaare
validforthepurchaseandusageofthissoftware.
Ifanyoftheseregulationsareorbecomeinvalidduetolegalreasons,thenthe
remainderremainvalidnevertheless.
©Copyright2007byVista
ALLRIGHTSRESERVED
VistaSmartDisc02
Warrington,16/03/2007
Art.No.:8.3143-E
Vista
NorbainHouse
EskdaleRoad
WinnershTriangle
WokinghamBerkshireRG41
5TS
Tel:0800484782
www.vista-cctv.com

Vista SmartDisc 02 5
Contents
1How to use this manual ........................................................... 7
Conventions................................................................................................ 7
2Introduction ..................................................................................... 9
3System description ..................................................................... 11
3.1 Includedindelivery.............................................................................. 11
3.2 Accessories............................................................................................ 11
3.3 Warranty................................................................................................ 12
3.4 Mountingandsettingup................................................................... 12
Generalsafetyinformation........................................................................ 12
Electricalsafety.......................................................................................... 13
3.5 Systemenvironment........................................................................... 14
Overviewofsoftwareforoperation,alarmverification,andconfiguration.14
Compatibilityofsoftwareversions............................................................. 14
3.6 Controls,indicators,andports......................................................... 15
Frontviewanddescription........................................................................ 15
Rearviewanddescription.......................................................................... 17
3.7 Pinassignmentandfunctionality..................................................... 18
24pinterminalblock................................................................................ 18
Controlinputs,errorrelay,tamperprotection............................................ 20
EthernetandISDNinterfaces..................................................................... 21
Modem/nullmodem.................................................................................. 21
TerminalTransp.data/controlinterface...................................................... 23
AudioconnectionsSmartDisc02............................................................... 24
3.8 Harddisk................................................................................................ 25
3.9 Devicereset........................................................................................... 27
4Commissioning ............................................................................. 29
4.1 Firststeps............................................................................................... 29
4.2 Generalconfigurationinformation.................................................. 30
5Description of "Site archive" features ......................... 33
5.1 Storageconcept................................................................................... 33
Advantagesofthemulti-trackrecordingprocess....................................... 33
Cameratracks........................................................................................... 33
Recordingmodes...................................................................................... 35
Continuousrecording................................................................................ 36
Eventtriggeredrecording.......................................................................... 39
5.2 Logfile................................................................................................... 41
Logfilecommandoverview....................................................................... 42
6PTZ control ...................................................................................... 47
PTZfunctions............................................................................................ 47
Cameraremotecontrolinterface............................................................... 48
6.1 Enhancedfeatures............................................................................... 49
ControlfileR01......................................................................................... 49


6Vista SmartDisc 02
6.2 Camerasystem(PTZprotocols)overview....................................... 50
7Web Server ...................................................................................... 51
8Technical Data SmartDisc 02 ............................................... 55
9Factory settings ............................................................................ 57
GeneralsettingsPart1/2........................................................................... 57
Connections.............................................................................................. 57
Camera-specificsettings............................................................................ 57
Alarm........................................................................................................ 57
Sitearchive................................................................................................ 58
GeneralsettingsPart2/2........................................................................... 58
Extras........................................................................................................ 58
Interfacespecifications.............................................................................. 59
10 Troubleshooting .......................................................................... 61
Whattodointheeventofmalfunctions/tamper..................................... 61
Generalerrors........................................................................................... 62
Nonullmodemconnectionpossible.......................................................... 62
Errordiagnosisfordirectconnectionsbynullmodemcable....................... 63
Noremotetransmissionpossible............................................................... 63
Imagedisplayerrors.................................................................................. 64
11 Supplement .................................................................................... 65
11.1 ChronologicSmartDisc02firmwarehistory.................................. 65

1Howtousethismanual
Vista SmartDisc 02 7
1 How to use this manual
ThismanualprovidesinformationonallfeaturesofSmartDisc 02.Astep-by-
stepwalkthroughwillacquaintyouwiththetransmissionandrecording
features.AllyouneedisSmartDisc 02andaPCorlaptopwith
SmartControl or SmartControl PRO software.
Version
creation date
ThismanualdescribesSmartDisc 02versionv1.38.ItwascompiledinMarch
2007.AspartofcontinuousproductdevelopmentSmartDisc 02firmwareis
intheprocessofperpetualenhancement.SeetheinstallationCDorour
website(http://www.vista-cctv.com)forthecurrentfirmwareversion.
Findinformationthatcouldnotbeincludedinthemanualatthetimeof
printingattheendofthemanualinchapter"Supplement"(see
”Supplement”onpage65).
Supplementary
manuals
PerformsetupconvenientlywithSmartControl or SmartControl PRO
software.Pleasereadthenotesonsetupintherespectivesoftwaremanual.
ThesoftwaremanualsareavailableontheinstallationCDinseveral
languagesandasaPDFfile(onlinedocumentation).
IncaseyouoptedforanISDN Card,Audio Cardand/ora19" Mount Kit
pleaserefertotheinformationintheinstallationinstructionsforthemodule
ortheinstallationkitaswell.
Conventions
Highlighting Textreferringtoproductnames,dialogwindows,buttonsorillustrationsis
printedinboldface(e.g.SmartDisc 02,ENTER, OK, Connect).
Orientation Keywordsandprogramsymbolsontheleftwillhelpyoufindyourway
aroundandmakeiteasiertogetbacktosectionsalreadyread.
Wethankyouforusingthishardwareproductandwehopethatyouwillbe
satisfiedwithourservices.
Commentsandspecialinstructionsareplacedingreyboxes.Additional
exclamationmarks(seeleft)indicateinformationofspecialimportance.

1Howtousethismanual
8Vista SmartDisc 02

2Introduction
Vista SmartDisc 02 9
2 Introduction
ThankyouforchoosingaVistasecurityproduct.Weuseonlyhigh-quality
componentsthatmeetthemoststringentsecurityrequirementsinour
devices.Theyguaranteeyearsoftrouble-freeoperation.SmartDisc 02 is
casedinarobuststeelhousing.Itissuitedtodeskmounting,wallmounting,
andmountingin19inchrackcabinets.Yearsofexperienceindevelopingand
manufacturingCCTVsoftwareandhardwarehaveresultedinawellthought-
outandreliableproductdesignedforawiderangeofapplications.
SmartDisc 02 in
brief
SmartDisc 02isahardwareplatformespeciallydesignedforCCTV
application,featuringdigitalpicturetransmission,picturerecording,remote
evaluation,andintegrationintosuperordinatecontrolcentresystems.
Features at a glance Transmissionanddigitalstoragewith2videoinputs
■Resolutionindividuallyadjustabletoupto720x288pixels
■IntegratedMulti-Unicastserversimultaneouslysupportingupto6IP
connections,or5IPand1dialupconnection,or4IPand2dialup
connections.IftheWebServerisused,oneofthesesixstandard
connectionsisdroppedinfavourofuptofouradditionalWebbrowser
connections.
■Precisiontimingrecordingofpre-alarmimages,individuallyadjustableto
cameraandevent
■Event-triggereddialupbyalarmcontact,motiondetection,technical
alarm,androutinecall
■Perfectedforalarmverificationanduniqueconformitywithcontrolcentre
applications
■Full-duplexvoicecommunicationbybidirectionalaudiotransmission
■Integratedinterfacesfornetwork,PTZcontrol,datatransmission,and
systemintegration
■Extensiveremotecontrolfunctionstocontrollighting,barriers,alarms,
doors,andanyrelay-controlleddevices
■Continuousrecordingonintegratedharddiskwithadaptivemultitrack
managementandmotionorcontactcontrolledrecordingcontrolledby
timerwithcalendarfeature
■Multi-criteriaevaluationofharddiskrecordingsbyIPand/ordialup
connection
■Liveimagereplicationandstoredimageplaybackparalleltobackground
recording
■Compactdesign,suitablefordeskmounting,wallmounting,and
mountingin19”mode
Models SmartDisc 02issuppliedwith2videoinputs
Functional units SmartDisc 02consistsofthefollowingfunctionalunits:
■Videomultiplexerwith2videoinputs
■ImageoptimisedconditionalrefreshcompressionbasedonM-JPEG
■Digitalrecordingonintegratedharddiskwithadaptivemultitrack
managementforupto2cameratracks
■DigitaltransmissionofliveorstoredimagesbyIPordialupconnection

2Introduction
10 Vista SmartDisc 02
■RemoteconfigurationandmaintenancebyIPand/ordialupconnection
■Adaptivealarmmanagementforcontrolinputs.Motiondetectionfor
automaticdialupandrecordingcontrol
■Systemandvideosignalmonitoring
■Cameraandrelaycontrol
■Timercontrolwithcalendarfeature
■Analogvideooutputformanualswitching,sequenceroperation,and
alarmswitching
SmartDisc 02
options
ForinformationontheavailableoptionsfortheSmartDisc 02,pleaserefer
tothe"Systemdescription"chapter(see”Accessories”onpage11).Thislists
theoptionsthatcaneasilybefittedbytheinstallerintotheSmartDisc 02.

3Systemdescription
Vista SmartDisc 02 11
3 System description
SystemdescriptionprovidesyouwithanoverviewofyourSmartDisc 02and
oftheoperatingrequirementforSmartDisc 02.Thischapterprovides
informationonmounting,securityadviceaswellasinformationonthedevice
andtheports.
3.1 Included in delivery
Pleaseensurethatalllistedcomponentsareincludedinthepackage.Please
contactyourdealerincaseofmissing,incorrect,ordamagedcomponents.
Pleasekeeptheoriginalpacking,ifconvenient.Thispackingwillfacilitate
returnoftheproduct.
3.2 Accessories
Mountable modules ■Audio Card:Audiomoduleforbidirectionaltransmissionofdigitalaudio
signalsinvoicequality
■ISDN Card:ISDNmodulewithS0/I.430interfacefortransmissionviaone
Bchannel
External adapters ■Dialupadapterforintegrationintopublicandprivatenetworks(PSTN/
POTS,ISDN,GSM,HSCSD)
■R16 Adapter:Remoteadapterwith16remotecontrolrelaysfor
SmartDiscseriesdevices
Mounting kits ■19" Mount Kit:1RUinstallationkitfor19"modemountingofuptotwo
SmartDisc 02
Component SmartDisc 02
SmartDisc 02basicdevice x
Internal2.5"harddisk 120GByte
Externalswitchablepowersupply
withwiredterminalsfordirect
connectiontoSmartDisc 02 x
Europowersupplycable x
UK/Europoweradapter x
Vistanullmodemcablex
Crossovernetworkcable x
InstallationCDincludingallrequired
softwarepacketsandsoftware
manualinonlineformat
x
SmartDisc 02 devicemanual x
Theinstallationinstructionsforon-siteinstallationsareprovidedforboth
modules.

3Systemdescription
12 Vista SmartDisc 02
■SmartMount Kit:Two-partmountingplateforinstallationincluding
strainrelief
3.3 Warranty
Vistaguaranteesproperoperabilityofdevicesandaccessoriesinaccordance
withtheGeneralTermsandConditions.Notcoveredisdamagecausedby
■non-compliancewiththeinstructionsprovidedinthismanual,
■inappropriateuse,storage,oroperation,
■changestodevicesnotauthorisedbyVista,
■useofcomponentsoraccessoriesnotapprovedbyVista,
■openingthedevicehousing,oranykindofinappropriateintervention.
3.4 Mounting and setting up
SmartDisc 02isdesignedforuseinspecificambientconditions.Conditions
deviatingfromthesecancausedamagetothedevice,ortotherecorded
data.Warrantywillbevoidedinthiscase.Pleasemaintaintheambient
conditionsdescribedbelowwhenusingyourSmartDisc 02device.
General safety information
■Makesuretocarefullyreadandunderstandthismanualbeforeoperating
thedevice.
■Donotexposethedevicetostrongvibrationorshock.
■Avoidhumidityordust,extremetemperaturefluctuations,orstrong
magneticfields.
■TheoperatingtemperatureforSmartDisc 02isbetween+5°Cand+40°C.
■Providesufficientventilation.Donotblockvents.Providesufficientair
circulationforcupboardinstallations.
■Neverexposethedevicetodirectsunlight.Keepitwellawayfromother
sourcesofheat(radiators,etc.).
■Installationorientation:vertical,horizontal,withadeviationofnotmore
than±5°.
■Itisessentialthatyoumaintaintherequiredambientconditionsfor
outdoorinstallations.Protectthedeviceagainstatmosphericinfluence.
■Waitforatleast10secondsafterswitchingoffthedevicebeforeturningit
onagain.
■Alwaysusetheoriginalpowersupplyunitwiththerespectivecable.Useit
onlyforthededicatedvoltage.Ensurethatthecableisintact.Neveruse
damagedcables.
■Selectaninstallationsiteprotectedagainstburglaryandvandalism.Ensure
unrestrictedventilation.
■Makesurethatspecificationlimitsarenotexceededwhenconnecting
externaldevices.
Refertoourcurrentpricelistfortherespectivepartnumbers.

3Systemdescription
Vista SmartDisc 02 13
Electrical safety
■Alwaysmakesurethatyourhandsarecompletelydrybeforetouching
SmartDisc 02,thepowersupplyunit,cables,orsockets.Nevertouch
thesewithwethands.
■Disconnectthedevicefromthepowersupplybypullingattheplug,notat
thecable.Neverpullatthecable.
■Ifwateroranyotherliquidentersthedevice,immediatelydisconnectthe
powersupply.Havethedevicecheckedbycustomerservice.
■Thedevicecontainsnocomponentsthatcanbeadjustedorrepairedby
theuser.Thedevicehousingmustneverbeopenedever.
■OnlyauthorisedstaffmayopenthehousingforinstallingISDN Cardsor
Audio Cards.Theinstructionsintheincludedmanualsmustbeobserved.

3Systemdescription
14 Vista SmartDisc 02
3.5 System environment
Overview of software for operation, alarm verification, and configuration
SmartDisc 02isastandaloneunit.Onceinstalledandconfigured,itreactsto
events,recordstheseonacontinuousoronanevent-triggeredbasis,
transmitsand/orsavesvideoand/oraudiodata,alarmstolocalandremote
receiverunits,andadditionallylogsprotocolslocally.Onlyoneofthe
followingsoftwarepackets,developedbyVistaespeciallyforCCTV
applications,isrequiredforthePCbasedreceiver/evaluationunit.
■SmartControl (partofSmartDisc 02delivery)
softwareforoperation,alarmverification,andconfigurationforsingle
workstationswithupto2000transmittersSmartDisc 02,SmartMobile,
SmartDisc,SmartTeland/orSmartLine.TheSmartControl softwareis
usedforsettinguptheSmartDisc 02.
■SmartControl PRO
softwareforoperating,alarmverificationandconfigurationofsingle
workstationapplications.Enablessimultaneousviewingofupto
9transmitters.Maximum2000transmitters(SmartDisc 02,
SmartMobile,SmartDisc,SmartTel and/orSmartLine).
■Smart Player (includedinSmartDisc 02delivery)
softwareforreplayandevaluationofSmartDisc 02,SmartMobile,
SmartDisc andPC archives,andintegralpartofSmartControl and
SmartControl PRO.
Compatibility of software versions
EnsurecompatibilityofSmartControlsoftwarewithyourSmartDisc 02.The
tablebelowprovidesanoverview:
PC requirements PleaserefertotheappropriateSmartControlsoftwaremanualforPC
hardwareandsoftwarerequirements.
Informationonothersoftwaresolutions,inparticularforintegrationinto
higher-levelcontrolcentressuchasVista'sEvent Management System
(EMS),isavailableonrequest
Software compatible from version
SmartControl v3.55
SmartControl PRO v3.55
Smart Player v3.31

3Systemdescription
Vista SmartDisc 02 15
3.6 Controls, indicators, and ports
Front view and description

1 3 4 5
6
7
8
9
10
112
Vista SmartDisc 02
SmartDisc 02
Item Labeling/description Function
SmartDisc 02willbeinitialisedafterswitchon.Dependingon
configuration,thismaytakeupto90seconds.Avoidswitchingon
immediatelyfollowedbyswitchingoff.Thismayleadtolossofdata.
Onlyswitchoffthedeviceafteroperatingmode(i.e.afterinitialisation)
hasbeenreached.
1LEDPower-green TheilluminatedLEDindicatesthatthedeviceisswitchedon.
2Pushbutton Reset,
notlabelled
Deleteuserspecificpasswordsandusernamesbypressingpushbutton
Reset(e.g.withthetipofaballpointpen)for10seconds,untilLED
Powerstartsflashing.Subsequently SmartDisc 02willberestarted
automatically.Nootherpasswordsorsetupdatawillbedeleted
besidesuserpasswords.
3V1-V2
LEDs-yellow
AnilluminatedLEDincombinationwithilluminatedLEDError(5)
indicatesvideosignalfailureoftherespectivevideoinput. Tip:
Deactivate unused camera inputs using device settings.
AnLEDchaserlightfromlefttorightindicatesharddiskinitialisation.
4 PushbuttonVout-
black
Pushbuttonformanualcontrolofvideooutput(Vout).Individually
switchcameras,orstartandstoppredefinedcamerasequences,
dependingonconfiguration.Thisfeatureisonlyavailableifacamera
sequencehasbeenprogrammed.
1. PresspushbuttonVouttostopacamerasequence.Thecamera
currentlyswitchedonwillremainactiveaslongasthepushbuttonis
pressed.
2. Releasingthebuttonrestartsthecamerasequencewithadelayed
switchtothenextcamerainthesequencerlist.
3. Switchsequencercamerasmanuallyby:Stoppingthesequenceas
describedunder1.Brieflyreleasethepushbuttonandpressagainto
switchtothenextcamera.Releasethepushbuttonandkeepit
releasedtoactivatesequencermode.
5LEDError-red AnilluminatedredLEDindicatesmalfunctions,suchassystemerrors
orvideosignalfailure.ViewingtheSmartDisc 02Logfileresetsthe
indicator.YoucanconfiguretheonboardSmartDisc 02relayssothat
theerrorwillalsoactivatearelay.

3Systemdescription
16 Vista SmartDisc 02
6LEDOnline-blue AnilluminatedLEDindicatesanonlineconnection.
7LEDLive-blue FlashingupofLEDLiveduringonlineconnectionindicatesongoing
picturetransmission.Theintervalisdeterminedbytheimagerate,
whichinturnisdefinedbyconnectionspeed(bitrate)andthe
SmartDisc 02operatingmode.
8LEDRecord-blue AnilluminatedLEDRecordindicatesharddiskaccesscausedbyimage
writeoperationsandsystemaccess,liketransmissionofdateandtime
data.
9LEDArmed(alarm
enabled)-yellow
IndicatesthealarmenablestatusofSmartDisc 02.AnilluminatedLED
Armed(alarmenabled)indicatesalarmsbeingforwardedtoreceiver
units,dependingondeviceconfigurations.Thealarmenablestatus
hasnoimpactonpicturerecording.
10 LEDAlarm-red AnilluminatedAlarmLEDduringalarmprocessingindicatesthe
SmartDisc 02 alarmstatus.Analarmmayrequireconfirmationby
severalreceivers,dependingondeviceconfiguration.
11 USBport Reserved
Item Labeling/description Function

3Systemdescription
Vista SmartDisc 02 17
Rear view and description
1 2 3
4 5 6 7 8 9 10
Vista SmartDisc 02
Item Labeling/description Function
1V1in-V2inVideoinput1-4/10:BNCsocketsforconnectingcolourorB/Wvideo.
SwitchingbetweenCCIR/PALandEIA/NTSCmodeisautomatic.
2V1out-V2outVideooutput1-4/10:Activeloopthroughoutputs-BNCsockets-for
directconnectionofadditionalvideosystems/monitors.
3Vout Videooutput:Analogvideooutputwithvideoswitchand/orsequencer
feature,e.g.fordirectconnectionofavideomonitor.
424pin
terminalblock
Terminalblockwithscrewtypeterminals:Terminalsforpowersupply,
PTZcontrolinterfaces,controlinputs,relayoutputs,loudspeakers
(optional).
Note: Pin assignment is detailed in section "Pin assignment and
functionality" (see”24pinterminalblock”onpage18)
5 Ethernet SocketRJ-45:Ethernetinterface(10/100MBit/s)(see”Ethernetand
ISDNinterfaces”onpage21)
6ISDN SocketRJ-45:ISDNinterface(S0bus)(see”EthernetandISDN
interfaces”onpage21)
7 Modem/nullmodem 9pinsubDplug:Serialinterfaceto(RS-232)fordirectconnectionof
externalmodulesforMODEM,ISDN-TA,GSM,orofPCwithVistanull
modemcable.
Note: Pin assignment is detailed in section "Pin assignment and
functionality"(see”Modem/nullmodem”onpage21)
8 Transp.data/
Controlinterface
9pinSub-Dplug:Transparentdatainterface(RS-232)forbidirectional
transmissionofserialdatabetweenSmartDisc 02andSmartControl
receiverunit.TheinterfaceispreparedforPOSfunctionalityandserial
remotecontrolofcertainSmartDisc 02features.
Note: Pin assignment is detailed in section "Pin assignment and
functionality"(see”TerminalTransp.data/controlinterface”on
page23)
9LineinJacksocket:Directconnectionofanaudiosourcewithlineleveloutput
(see”AudioconnectionsSmartDisc02”onpage24)
10 Lineout Jacksocket:Directconnectionofanaudiosourcewithlinelevelinput
(see”AudioconnectionsSmartDisc02”onpage24)

3Systemdescription
18 Vista SmartDisc 02
3.7 Pin assignment and functionality
General Allterminalsarepluggable.Itisrecommendedtoremovethescrewtype
terminalforwiring,especiallyoftheterminalblock.Thismakeswiringof
incomingandoutgoinglinesmoreconvenient.Thescrewtypeterminalsare
groupedbyfunctionality.
24 pin terminal block
Pin Labeling/
description Type Function
1 RS-485- Serial
(D–)
Usethisterminaltoconnectupto2remotecontrolcamerasor
othercompatibledevices(e.g.matrix)withRS-485/RS-422
interfaces.RefertoChapter"PTZControl"(see”PTZcontrol”
onpage47)foralistofdevices/camerasystemsand
informationontherespectivedevicedrivers/protocols.
2 RS-485+ Serial
(D+)
3 Ground Commongroundforallinputsoftype"controlinput"
4 RS-232Tx Serial
TxD
Usethisterminaltoconnect1remotecontrolcameraorone
othercompatibledevice(e.g.matrix)withRS-232interface.
RefertoChapter"PTZControl"(see”PTZcontrol”onpage47)
foralistofdevices/camerasystemsandinformationonthe
respectivedevicedrivers/protocols.
5 RS-232Rx Serial
RxD
6 Ground Commongroundforallinputsoftype"controlinput"
7Ala/d Control
input
Arm/Disarminputforenabling/disablingdialuptoa
SmartControlreceiverPC,controlledby"Controlin",
"Alin",and"MotionDetection".
8Vout Control
input
Pushbuttonformanualcontrolofvideooutput(Vout).Switch
camerasindividually,orstartandstoppredefinedcamera
sequences,dependingonconfiguration.Thisfeatureisonly
availableifacamerasequencehasbeenprogrammed.
1. Forstoppingcamerasequences,controlinputsmustbe
switchedtoground.Thecameracurrentlyswitchedonwill
remainactiveaslongasthepushbuttonispressed.
2. Assoonasthecontrolinputisswitchedtohighresistance,the
camerasequenceisstartedwithadelayedswitchtothenext
camerainthesequencerlist.
3. Switchsequencercamerasmanuallyby:Stoppingthe
sequenceasdescribedunder1.Toswitchonthenextcamera,
brieflyswitchthecontrolinputtohighresistanceandthen
againtoground.Toactivatesequencermode,keepthe
controlinputswitchedtohighresistance.
9Alin Control
input
Alarminputfordialupwithautomaticswitchingofvideoinput
1(V1in)toaSmartControlreceiverunit.
Note: The operation of this input always depends on the status
of arm/disarm input "Al a/d"
⊥
⊥

3Systemdescription
Vista SmartDisc 02 19
Pin assignment
terminal block
10 Auxin1 Control
input
Tamperinputfordialupwithautomaticswitchingofvideo
input1(V1in)toaSmartControlreceiverunit.
Note: The operation of this input is independent of the status
of the arm/disarm enable input "Al a/d"
11 Speaker+AudioIfyourSmartDisc 02isequippedwithanAudio Card,usethis
outputforconnectingaloudspeakerwith1W/8Ohmfor
audioreproductionattheobjectofobservation.Theoutputis
protectedagainstoverload,butnotagainstshorts.Usinga
speakerwithmatchingmaximumoutputisrecommended.
12 Speaker-Audio
13 12VDC+Power,
+
Supplyvoltageis12VDC.Onlyconnectthedevicetoyourlocal
powersupplysystemusingtheprovidedpowersupplyunit
withthepreparedconnectioncable.Onlyusethepowersupply
cablematchingyourgrid(Euro/UK).
14 12VDC Power,
ground
15 R1[Common] Relay Deviceconfigurationallowsyoutoallocatethefollowing
functionstoanyrelay:
■ManualremotecontrolwithSmartControl, SmartControl
PROorSmartControl CLIENTdistinguishingbetween
switchandpushbuttonfunctions
■SwitchingtoatleastoneSmartControlreceiverunitwith
activeonlineconnection
■Errorrelay
16 R1[normallyopen] Relay
17 R1[normallyclosed] Relay
18 R2[Common] Relay
19 R2[normallyopen] Relay
20 R2[normallyclosed] Relay
21 Auxin2 Control
input
Auxiliaryinput2:Reserved
22 Ground Commongroundforallinputsoftype"controlinput"
23 Ctrlin1 Control
input
Cameracontrolinputsforexternalcontacttriggeredrecording
and/orselectivedialuptoaSmartControlreceiverunitfor
videoinputs1and2.Thesecontrolinputscanbeusedfor
eventrecordingaswellasforeventoptimisedcontinuous
recording.
24 Ctrlin2 Control
input
Pin Labeling/
description Type Function
⊥
⊥
121
2413