Dedicated Micros Digital Sprite 2 User manual

Setup Guide
Guide d’installation
Setup-Handbuch
Guía de configuración
Guida all'impostazione
Installatie Handleiding

Warning: Do not move the unit whilst the power is connected.
!

1
ENGLISH
• Introduction 1
• Important Safeguards 3
• Installing Digital Sprite 2 5
• Quick Install 6
• Connecting External Devices 8
• Configuring Digital Sprite 2 15
- Using the Menus 15
- Time, Date & Language 17
- Camera Viewing 18
- Schedule 19
- Standard Recording Schedule 20
- Variable Recording Schedule 23
- Network Options 24
- Alarm Options 27
- VMD Options 33
- Display Options 34
- Passwords 36
- System Options 37
- Record Options 40
- Camera Set-up 44
- Alarms and Presets 45
- Activity Camera Setup 46
- Text Insertion Setup 50
• Appendix 1 - Rack mounting kit 51
What is the Digital Sprite 2?
The Digital Sprite 2 range has combined multiplexing, digital recording and
dome telemetry control to offer a high performance DVR with advanced
network features.
The Digital Sprite 2’s intuitive configuration menu system with network server
capabilities bring CCTV and Networking into a single box solution.
The Digital Sprite 2 range offers a feature rich product range which has been
designed with sufficient flexibility to ensure the unit can fit into any environment
whether it is a new installation or is easily integrated into an existing install.
A video multiplexer
• Designed with security in mind.
• Easy to use.
• Operates like a traditional multiplexer, not a PC.
• All the feature you would expect from a Dedicated Micros multiplexer:
- Main and Spot monitor.
- Multiscreen displays.
- Activity detection.
- Alarm handling.
- Schedules for day, night and weekend.
- User defined record rates.
- 485-bus networking.
Contents Introduction

2
ENGLISH
A digital video recorder
• Playback and record simultaneously, without affecting recording.
• 31 days or more of 24 hour time-lapse recordings in one box*.
• Instant access to images recorded on the hard disk with no tapes.
*Refers to the 320GB (or higher) model.
Network transmission
• Web configuration in conjunction with on screen menus.
• View live and playback images across the network.
• Remote reporting for centralised monitoring.
• FTP, SMTP support for remote download of images.
• SMS support for transmission of text messages on alarm.
• Enhanced network features including on-board Firewall, Webcam
functionality.
• No extra software to buy, Viewing software for Windows™ provided or
viewing and control via a standard internet browser.
Features:
Installation
Auto detect cameras on power up 
Auto detect external storage on power up 
Default 24-hour recording at Medium quality 
Loop-through connections 
Operation
Play, record, copy and transmit simultaneously 
Hidden camera option 
Control via IR remote control 
Playback
VCR style playback 
Full and multiscreen playback 
Events
Activity detection 
Alarms 
Event log with preview window 
Autocopy events to CD or FTP Server 
Pre and Post event times 
Telemetry
Coaxial support for BBV, Pelco & Dennard 
Serial telemetry support for multiple third party protocols (Dennard,
Pelco, Sensormatic and more) 
Telemetry presets on alarm 

3
ENGLISH
Read Instructions
All the safety and operating instructions should be read before
the unit is operated.
Power Sources
This unit should be operated only from the type of power source
indicated on the manufacturer’s label.
Servicing
Do not attempt to service this unit yourself as opening or removing
covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
Ventilation
Ensure unit is properly ventilated to protect from overheating.
To prevent fire or shock hazard, do not expose this equipment to rain or
moisture. The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user of this equipment that there are dangerous
voltages within the enclosure which may be of sufficient magnitude to
constitute a risk of electric shock.
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Important Safeguards
Audio
Record audio in real time 
Remote keyboard control (optional)
Remote keyboard compatible 
Control of multiple units 
Telemetry controller 
Network viewing
Live viewing 
Playback viewing 
Multiple simultaneous Users 
Telemetry control 
Copy images across networks 
E-mail on event activation 
Storage devices
Internal CD Writer 
RAID & JBOD 
Plextor CDR (check for compatible models) 
The manual has two parts:
1. Installation
– giving details of how to install the Digital Sprite 2 and connect external
devices.
2. Setup
– giving details of the configuration menus of the Digital Sprite 2.
WARNING
WARNING

4
ENGLISH
LIGHTNING STRIKE
The Digital Sprite 2 range has some inbuilt protection for lightning strike,
however it is recommended that isolation transformers be fitted to the system
in areas where lightning is a common occurs.
REGULATORY NOTES FCC AND DOC INFORMATION
(USA and Canadian Models Only)
WARNING: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at their own expense.
If necessary, the user should consult the dealer or an experienced
radio/television technician for corrective action. The user may find the following
booklet prepared by the Federal Communications Commission helpful: “How to
Identify and Resolve Radio-TV Interference Problems”.
This booklet is available from the US Government Printing Office, Washington,
DC20402, Stock No. 004-000-00345-4.
This reminder is provided to call the CCTV system installer’s attention to
Art. 820-40 of the NEC that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
CE Mark
If this product is marked with the CE symbol it indicates compliance
with all applicable directives.
Directive 89/336/EEC.
A “Declaration of Conformity” is held at Dedicated Micros Ltd.,
11 Oak Street, Swinton, Manchester M27 4FL.
The Digital Sprite 2 supports an integrated CD writer, the following are
additional warnings associated with installing and operating the CD writer,
please pay particular attention to this information.
• Caution - Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous
radiation exposure.
• To prevent exposure to laser emanations (harmful to the eyes), do not
attempt to disassemble this unit.

5
ENGLISH
Installing the Digital Sprite 2
Before you start:
Check the contents of the box:
Digital Sprite 2
IR remote handset
Mains cable with plug fitted (North America)
Mains cable with plug fitted (European)
Mains cable without plug fitted (other regions)
Rack mount kit (rack mount ears, rear supports, and fixing screws)
485-bus cable
Setup Guide and Operator Guide, note the Networking Guide is
stored on the unit and downloadable from the Web interface
Choosing a location for installation
Digital Sprite 2 is designed to be rack or desk mounted. The following
precautions must be taken when installing Digital Sprite 2:
• The rear supports must be used when rack mounting the unit, failure to use
these may cause damage to the unit.
• If the unit is to be installed in a closed or multi-unit rack assembly, the
maximum operating ambient temperature must not exceed 104oF (40oC).
• Ensure there is a 1" (2.54cm) gap on either side of the unit.
• Openings in the unit’s case are provided for ventilation and to prevent
overheating, these openings should not be blocked or covered.
• When stacking units, ensure there is at least a 1/2" (1.3 cm) gap between
each unit.
• Ensure the unit is not located in an area where it is likely to be subjected to
mechanical shocks.
• The unit should be located in an area with low humidity and a minimum of
dust. Avoid places like damp basements or dusty hallways.
• Ensure there is reliable earthing of the mains outlet when fitted to supply
connections other than direct connection to the branch circuit.
• When connecting the Digital Sprite to a branch circuit this must be rated
15 Amps.
• If using external storage, refer to the relevant JBOD or RAID instructions for
placement details.
• It is recommended that a UPS (Uninteruptable Power Supply) be connected
to the unit in case of power failure. This will ensure the continuous operation
of the Digital Sprite 2.
Typical Power Ratings
A quick overview of digital recording
Digital multiplex recorders work in exactly the same way as analogue
multiplexers except that they use hard disks and digital tape to store video,
instead of VCR tapes. Analogue recording uses time-lapse recording to extend
the length of time recorded onto a 3-hour tape - recording fewer pictures every
second. Adjusting the number of pictures recorded every second also extends
the length of time recorded onto the hard disk of a Digital Sprite 2. However,
other factors also determine the amount of time that can be stored on the disk
of a digital multiplex recorder:
• The image quality
• The record rate
• The hard disk capacity
Image quality
Digital multiplex recorders store images in a compressed format, allowing
images to be recorded more efficiently. The higher the compression, the
smaller the file size, but the image quality will suffer. Digital Sprite 2 can
compress images between 6KB and 45KB. Kilobytes and Gigabytes are units
of storage:
1GB = 1024 Megabytes (MB)
1MB = 1024 Kilobytes (KB)
Voltage (VAC) Typical Current (amps) Power (W)
240
110
0.37 88.8
0.54 59.4

6
ENGLISH
66
Rear Panel Connections
A Digital Sprite 2 can be installed in as little as 4 steps, and being plug-and-
play, cameras will be detected and begin recording automatically.
Connections at rear of the Digital Sprite 2
The illustration shows the rear panel connections.
Video
Audio
Data
Quick Install
SERIAL 1 SERIAL 2
SERIAL 3 SERIAL 4
TERM 485 BUS AUX ALARMS
AUX RELAYS
R1 R2 DIRECT
-+
12345
SCSI
NET AUDIO 1 AUDIO 2
MON A MON
VID 1 VID 2 VID 3 VID 4 VID 5 VID 6 VID 7 VID 8 VID 9 VID 10 VID 11 VID 12 VID 13 VID 14 VID 15 VID 16
IN IN
B
A
OUT OUT
(BUS A)
(BUS B)
With analogue recording, the image quality is dependent on the type of VCR
being used; VHS or S-VHS. Digital Sprite 2 allows the image quality to be
altered by adjusting the image size, for example, low quality is 14KB, medium
is 18KB, and high is 25KB*.
Using a larger image size will fill the hard disk faster than a smaller image
size, as more space is required to store it. To achieve the same amount of
recording time when a larger image size is used requires the record rate (PPS)
to be reduced.
* Note that as for all digital recording, image quality can vary for different scene types, medium
quality may be 18KB in one scene, but it may be 30KB or more to get the same quality in a
scene with more detail.
Standard record rate
The record rate is the amount of pictures recorded to disk in a second, or
pictures per second (PPS). This is a system wide figure, so whether 1 or 16
cameras are recorded, the record rate remains the same. The update rate per
camera can be worked out using the record rate:
Update rate = No. of cameras
Record rate
Hard disk capacity
Using a larger hard disk will allow image quality, recording rate, or recording
time to be increased. For example, an 80GB disk can record for 8 days at the
default settings (24-hour time-lapse mode at Medium quality).
Tip: As a rule-of-thumb recording at the default settings* will use 10GB of
storage per day, i.e. an 80GB unit will record for 8 days.
Calculating recording time
Digital Sprite 2 calculates the recording time automatically when the record
rate and image quality are entered. Alternatively, an interactive record
calculator is available for download from our web site:
www.dedicatedmicros.com
* 24-hour time-lapse mode, 6PPS, and medium quality images, 18KB.
VID1 to VID16 75 Ohm BNC composite camera connections (1V pk-pk)
Digital Sprite 2 is available as a 6, 9 or 16 channel.
MON A Main monitor, 75 Ohm BNC composite monitor connection (1V pk-pk).
MON B Spot monitor, 75 Ohm BNC composite monitor connection (1V pk-pk).
MON A Main monitor, S-video monitor connection.
SCSI 50-pin HD SCSI-2 connection.
NET RJ-45 10-baseT Ethernet connection.
SERIAL 1 & 2 9-way (Male) D-type RS-232 serial port.
SERIAL 3 & 4
(BUS A & BUS B)
9-way (Male) D-type RS-232, RS-422 and RS-485 serial port.
TERM Termination DIP switches for RS-485.
AUDIO 1 IN RCA (phono) socket, 47 KOhms 1V pk-pk.
AUDIO 1 OUT RCA (phono) socket, 1V pk-pk.
AUDIO 2 IN Not used, available for future expansion.
AUDIO 2 OUT Not used, available for future expansion.

7
Alarms and relays
Digital Sprite Front Panel
The following details the keys and LEDs on the front panel of the
Digital Sprite 2.
Note: The diagram shows a 16 channel unit.
Camera Control
Monitor Control
ENGLISH
VCR Keys
Additional Keys
LEDs
EVENT COPY
GOTO
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
LIVE PLAY SPOT
RECORD
MENU
MODE
POWER / IR INDICATOR
485 BUS 2x MMJ ports for DM 485-BUS accessories.
R1 Screw terminal, alarm relay dry contact, NO/NC, configurable for
alarm.
R2 Screw terminal, activity relay dry contact, NO/NC, configurable for
VMD.
DIRECT Screw terminal, direct auxiliary input, NO/NC.
AUX ALARMS 25-way (Female) D-type programmable alarms, NO/NC.
AUX RELAYS 9-way (Female) D-type, configurable for global camera fail and
trigger on alarm.
1 - 16
Camera keys for camera selection.
Note: The number of camera keys will depend on the number of
video inputs supported on the product.
Initiate a sequence on Main (MON A) or Spot (MON B) Monitor.
Show a Picture in Picture display on the Main (MON A) monitor.
Show a four way split screen display on the Main (MON A) monitor.
Show a multiscreen display on the Main (MON A) monitor.
Pause the image in Live and Playback mode.
Rewind / Search images in Playback mode.
Playback recorded images and GOTO.
Fast forward / Search images in Playback mode.
EVENT Access Event Log and Event Search Filter menu.
COPY Access Copy Images menu.
MODE Select between Live and Playback mode.
MENU Enter User or Installer menus.
LIVE Unit is in Live mode when lit.
PLAY Unit is in Playback mode when lit.
SPOT Spot (MON B) monitor is being controlled.
RECORD Unit is recording video to the internal hard disk.
POWER Infra-Red control is enabled when green. The Infra-Red control is
disabled when the LED is Amber.

8
ENGLISH
88
Digital Sprite 2 uses 485-Bus networking to interconnect Dedicated Micros
products and accessories. Storage devices can be connected to the SCSI port,
and telemetry cameras can be connected to the serial ports. Devices that can
be connected to Digital Sprite 2 include:
Telemetry cameras
Storage devices
Ethernet networks
Alarms and Relays
Audio devices
485-Bus devices
Connecting telemetry cameras
Digital Sprite 2 supports numerous protocols to control coaxial, serial
(RS-232/485) and 485-Bus telemetry.
A remote keyboard is connected to the Digital Sprite 2 to gain control of the
telemetry function of the connected camera, refer to Connecting 485 Bus
devices.
The telemetry protocol type can be selected within the ‘Camera Setup’ and
‘Serial Telemetry Ports’ menus.
Coaxial Telemetry - Camera Setup Menu.
Serial Telemetry - Serial and Telemetry Ports Menu.
Coaxial telemetry
Digital Sprite 2 currently supports Dennard, Pelco Coaxitron* and BBV. Any of
the camera inputs can be enabled for coaxial telemetry.
Note: Using a BBV RX-100 protocol converter with the Digital Sprite 2 allows
control of most major manufacturer’s domes.
*The Tour, Patrol, and Auto-pan features are not available when using Pelco coaxitron domes on a
Digital Sprite 2. If you require these features you must use either a BBV RX-100 protocol
converter or serial telemetry.
Connecting external devices
STEP 1. Connect cameras
Connect cameras to the video inputs marked VID1 to VID6 (6-Way unit), to
VID9 (9-way unit) or to VID16 (16-way unit). Use the bottom row of connectors
for looping through to other equipment.
STEP 2. Connect monitors
Connect the video output marked MON A to the Main monitor (digital playback
and multiscreens).
Connect the video output marked MON B to the optional Spot monitor
(analogue full-screen images).
STEP 3. Connect the external devices
If external devices need to be connected to Digital Sprite 2, go to the next
section – ‘Connecting external devices’, before proceeding to Step 4.
STEP 4. Connect power
Once the Digital Sprite 2 is in its final position and all external devices have
been fitted and powered, connect power to the rear of the unit. The power-up
procedure may take a few minutes before Digital Sprite 2 can be used.
The unit will now record all cameras in a 24-hour
time-lapse mode without any further programming!

9
ENGLISH
Serial telemetry
Digital Sprite 2 currently supports a number of PTZ / dome protocols using
serial telemetry, as well as various RS232 matrix protocols.
Serial telemetry requires a twisted-pair connection from the Digital Sprite 2’s
serial port to the dome.
Serial telemetry can be either star configured (from the Digital Sprite 2 serial
port to each receiver), or delta configured (each receiver are linked (looped)
together), or a combination of the two. Therefore each receiver needs to be
addressed according to its camera number – consult your receiver
documentation for details.
Serial telemetry connection
There are four, 9-Way D-Type serial ports on the Digital Sprite 2. Serial 1 and
2 are allocated as full RS-232 only, with Serial 3 (BUS A) and 4 (BUS B) able
to support RS-232, RS-422 and RS-485.
The 9-Way D-Type has the following pin connections and RS-232, RS-422,
RS-485 pin allocation:
RS-232
RS-422
RS-485
Note: The screen from the cable should be connected to the connector frame.
The RS485 configuration is a bus topology, the maximum distance between
the initial piece of equipment and the last piece is 1200 meters (4000 feet), this
distance must not be exceeded. The bus should be terminated at each end
with 120 Ohm resistance.
Important notice regarding EMC compliance - Use only screened cables when
connecting to the Serial Port(s) of this equipment. The screen should be
connected to the chassis of the Digital Sprite 2.
Termination Dip Switches
The termination dip switches ensure the termination on the serial ports is
correct. When connecting 485-Bus, RS-422 and RS-485 serial devices to
Digital Sprite 2, it is important that the dip switches are set as follows:
15
69
View from rear of unit
Serial 1 & 2
Pin Allocation
Serial 3 & 4
Pin Allocation
RS-232
1
2
3
4
5
6
7
8
9
-
2
3
-
5
-
7
8
-
Data Carrier Detect (
Receive Data (RX)
Transmit Data (TX)
Data Terminal Ready (DTR)
Ground (GND)
Data Set Ready (DSR)
Ready To Send (RTS)
Clear To Send (CTS)
Ring Indicate (RI)
DCD)
Serial 3 & 4
Pin Allocation
RS-422
1
6
4
9
Transmit Data (TX+)
Receive Data (RX+)
Receive Data (RX-)
Transmit Data (TX-)
Serial 3 & 4
Pin Allocation
RS-485
1
9
Transmit Data (TX+)
Transmit Data (TX-)
12345
ON
SW1
SW2
SW3
SW4
SW5
DM 485 Bus
SERIAL 3 RS485 termination (TX)
SERIAL 3 RS422 termination (RX)
SERIAL 4 RS485 termination (TX)
SERIAL 4 RS422 termination (RX)

10
ENGLISH
10
2. JBOD
JBOD units contain hard disks which adds to the internal storage, effectively
extending the number of images which can be recorded before being
overwritten.
Unlike RAID, JBOD units do not offer fault tolerance. Therefore, if a disk fails
then the information held on that disk is lost. The disks in the JBOD are not
hot-swapable.
Connecting multiple external devices
Up to five external storage devices can be daisy chained from the SCSI port
on the rear of the Digital Sprite 2.
Each device must have a unique address and the last device on the chain
must be terminated. Check with the device documentation for details of
addressing and termination and maximum cable length.
The table below gives capacity and typical uses of each storage device
including the internal CD writer.
The table below shows the record time on CD for typical record rates, using an
18K file size. These values can be used when using the internal CD writer for
additional storage.
CDR-640MB
DVD-R
1PPS
9h 46m
56h 22m
3PPS
3h 12m
18h 47m
12PPS
48m
4h 41m
2PPS
4h 49m
28h 11m
6PPS
1h 36m
9h 23m
25PPS
23m
2h 15m
External storage Capacity Description Typical use
RAID Currently up to
10Tb
Disk array with
fault tolerance
Longer term storage
with instant access
640MB Removable media Clip storage
CD-R
JBOD 1Tb Disk array with no
fault tolerance
Longer term storage
with instant access
Connecting storage devices
Images are recorded to the internal hard disk for instant playback and
searching by the operator. The capacity of the internal disk affects the amount
of images and time that can be recorded. For example, a 80GB Digital Sprite 2
can record for 8 days at default record rates, but a 320GB Digital Sprite 2 can
record for 31 days at the same record rates.
The internal hard disk is a temporary storage device as the images are
constantly being overwritten after a certain period of time.
If all images need to be kept for longer then external storage is required. The
50-way high density SCSI-2 port on the rear of the Digital Sprite 2 is used to
connect to external storage devices.
There are two types of external storage devices which can be used:
1. RAID – Redundant Array of Independent Disks
RAID units contain hard disks which adds to the internal storage, effectively
extending the number of images which can be recorded before being
overwritten.
RAID units give protection if a fault occurs. If a disk fails in a RAID the images
will continue to record to another disk in the array. RAID also allows faulty
disks to be hot-swapped – replaced whilst the RAID is powered.

11
ENGLISH
Connecting to an Ethernet network
Digital Sprite 2 includes an enhanced video server allowing remote
connectivity across an Ethernet network. Multiple users can connect
simultaneously to the Digital Sprite 2 to view and control live or recorded video,
download recorded images or review database details.
The Digital Sprite 2 can be connected to a standard 10/100-baseT Ethernet
network and using the viewing application offers full control of the unit from a
remote location.
Network Connection
To connect a Digital Sprite 2 to a network you will need the following items:
• One RJ-45 network cable (CAT5 or equivalent).
• A static or DHCP IP address and Subnet mask (if accessed from beyond the
LAN, a Default gateway IP address will also be needed. Consult the network
administrator for advice).
Refer to the Network Options in the Configuration section for full details on
how to configure the units IP address.
Viewing images across the network
Digital Sprite 2 can use either a Web interface or network viewing software to
view images across the network.
The network viewing software can be downloaded directly from the unit onto
your local PC using the network connection, see below for details.
The recommended PC specification for viewing images over a network is:
• Pentium IV, 1.8GHz processor.
• 256MB RAM.
• 8MB of Video RAM.
• 16 Bit sound card for audio support.
• 1024 x 768 x 32bit colour monitor (min).
• 10/100Mbit Ethernet half duplex network interface card.
• Windows 2000, Windows XP.
• Internet Explorer 6 or Netscape Navigator 7.1.
Although the system will operate on lower specification computers this
standard will provide high performance video quality and update rates. If lower
specification processors are used this will affect the overall performance of the
computer.
Downloading the Viewer from the Unit
To connect to the Digital Sprite 2 for downloading the Viewing application:
1. Open your web browser on your PC.
2. Enter the IP address of the Digital Sprite 2 in the ‘Address’ box of Internet
Explorer or Netscape and press Enter. Remove all preceding 0’s, i.e.
123.123.123.001 in the Digital Sprite 2 should be entered as 123.123.123.1
in the web browser.
Note: If a password has been configured it will be necessary to enter the
Username and Password information to gain access to the unit. The default
user name and password are dm and web.
3. The main web page from the Digital Sprite 2 will be loaded. Click on the
‘Downloads’ option you will be presented with three options:
Viewer Software
System Manuals
Language Files
4. The PC will require Java Runtime Environment to be installed. To install the
JRE and viewer application, select Viewer Software and press the link for
the appropriate file (jre-x_x_x_x-windows.).Follow the on-screen
instructions.
5. Go back to the Downloads menu and select the System Manuals option,
download the NetVu ObserVer User Guide (.pdf).
6. Go back to the Downloads menu and select ‘Viewer Software’, select the
NetVu ObserVer windows link (NetVuObserVer_windows), follow the on-screen
instructions to install the viewer application.
Note: The viewer applications can be found in Start > Programs > NetVu
Observer or DV-IP Viewer. Details of using the software can be found in the
relevant ‘User Guide’.

12
ENGLISH
1212
Connecting Audio devices
Digital Sprite 2 supports the option to record audio alongside the recorded
video images. The audio can then be played back in conjunction with the video
locally on the monitor output or via the network connection using the viewing
software.
There are two audio channels (Audio 1 and Audio 2) both with Audio IN and
Audio OUT connections.
Note: The audio is not linked to any of the video inputs. It is independent of
the video.
Connecting a pre-amplifier to AUDIO IN
Where additional microphone gain and/or adjustable gain is required, an
external microphone pre-amplifier with adjustable gain is recommended.
A microphone pre-amplifier will provide a line level 1V pk-pk signal that can be
connected to the RCA socket labelled Audio IN on the Digital Sprite 2.
The line level input has the following specification:
Audio IN 47 KOhms input impedance, 1V pk-pk.
Connecting the AUDIO OUT to an amplifier
Connect the RCA socket labelled Audio OUT to an external amplifier or
powered loudspeakers.
The line level output has the following specification.
Audio OUT 1V pk-pk
Recording audio
Both the Audio in 1 and Audio Out 1 can be enabled for recording.
Once the microphone or pre-amplifier is connected to the Digital Sprite 2,
enable the option to record audio in the System Options menu.
It is advised that you test the quality of audio playback as it may be necessary
to increase the gain of the microphone.
Viewing images across the network using a web browser
It is possible to use Microsoft Internet Explorer (version 6.X and above) and
Netscape Navigator (version 7.1 and above) to view images from a
Digital Sprite 2.
Follow the previous instructions to display the Digital Sprite 2 web page, but
click on the ‘Live’ option instead of the ‘Software’ option.
The database from the Digital Sprite 2 will be downloaded to allow the
Operator easy access to event recordings, this process may take a few
seconds depending on the amount of information to be downloaded.
It will be necessary to enter a user name and password at this point, the
default user name and password is dm and web.
Tip: The web viewer does not have all the features of the Viewing application,
but it is useful if it is not possible to download the software, or if you want to
view the images from an offsite location i.e. via the web.
Viewing images across the network using an Apple Mac or
Linux
There is limited support for viewing images using an Apple Mac or Linux
system based operating system, contact Technical Support for more
information.

13
ENGLISH
Connecting relays
The Digital Sprite 2 supports six relays in total. These are divided between the
9 Way D-Type (AUX RELAYS) and the screw terminal (R1 / R2).
All of the relays are configurable within the menus.
R4, R5 and R6 can be configured to be triggered automatically on receipt of
any alarm, refer to the Alarm Zone Configuration menu.
R1, R2 and R3 can be configured to be automatically triggered; on receipt of
an alarm, notification of activity and notification of camera failure respectively.
The following details the pin connections and associated actions:
WARNING: The maximum rating of all the relays is 500mA @ 48V, exceeding
this load will cause damage to the relays.
Connecting 485-bus devices
Digital Sprite 2 uses the 485-bus networking system to allow multiple Digital
Sprites, remote keyboards, alarm modules, video switchers, and other
accessories to be connected together. The total length of the 485-bus network
can be up to 1500m (4900ft).
R1
R2
R3 (AUX RELAYS)
R5 (AUX RELAYS)
R4 (AUX RELAYS)
R6 (AUX RELAYS)
1&2
3&4
1&6
3&8
2&7
4&9
Global Relay
Global VMD
Global Camera Fail
Reserved (AUX RELAYS)
Reserved (AUX RELAYS)
Reserved (AUX RELAYS)
1
12 34
5
6
9
CONFIGURABLE GLOBAL FUNCTION
PIN
RELAY
AUX RELAYS
R1
R2
View from rear of unit
Connecting Alarms and Relays
Connecting alarm inputs
The Digital Sprite 2 supports up to 18 on-board alarm connections. By default
inputs 1 to 16 are configured to trigger event recording on cameras 1 to 16 of
a sixteen channel unit. There is an additional alarm, and a direct alarm.
The AUX ALARMS (alarms 1 to 17) are connected to the 25 Way D-Type
Female Connector, the pin out and associated functionality are:
There is an additional alarm contact on a screw terminal labelled Direct - / +,
which is used in conjunction with the schedule functionality of the system, and
acts as the trigger for the keyswitch.
Both the AUX ALARMS and Direct alarm can replace or used in conjunction
with external alarm modules (DM/CI01) as detailed within the Connecting
485-bus Devices section of this manual.
PIN CONNECTION
1-17
21 - 25
20
19
18
1-17
Ground
Reserved
Reserved
Reserved
1
13
14
25
View from rear of unit
56
Direct
-+

14
ENGLISH
1414
An example of connecting a remote alarm box to the Digital Sprite 2.
Remote Keyboards
A remote keyboard (DM/KBS3) can be connected to the Digital Sprite 2 to
provide extra functionality, such as:
• Remote control from a distance of up to 1500m (490ft).
• Control of multiple Digital Sprites.
• Control of on-board telemetry.
• Jog/Shuttle playback using the joystick.
• Panic alarm button - activates the system panic alarm zone input on the
Digital Sprite 2.
The example below shows a remote keyboard connected to a Digital Sprite 2:
Main & Spot Monitors
485-bus 485-bus
Remote Keyboard
Remote Alarm Box
14
Connecting additional alarm modules
Optional alarm modules (DM/CI01) can be added to the Digital Sprite 2 to
increase the number of alarm inputs. The Digital Sprite 2 can support multiple
alarm modules connected to the 485-bus.
To add alarms:
1. Connect the corresponding alarm contact to the alarm input, i.e. Alarm 2
would be connected between ground (GND) and A2.
2. If multiple alarm modules are required then each will need to be
addressed; consult the alarm module documentation for details.
3. Connect the 485-bus cable from the alarm module to one of the 485-bus
sockets on the Digital Sprite 2.
4. The polarity of the alarms (normally open/closed) is set in the ‘Alarms and
Presets’ menu page.
Note: The alarm contacts do not have to correspond to the equivalent camera
number, for example alarm 2 could trigger camera 1, 2 and 3 into alarm mode,
refer to Alarms and Presets menu for configuration details.
An alarm trigger can be programmed to perform any of the following:
Action Menu Page
Close/Open relay
Trigger a zone alarm
Transmit an e-mail
Remote alarm reporting
Send a camera to a preset position
Display the alarm camera on main / spot monitor
Change the record rate
Alarm Options - Alarm Zone Configuration
Alarm Options - Alarm Zone Configuration
Alarm Options - Alarm Zone Configuration &
Email Settings
Alarm Options - Alarm Zone Configuration &
Remote Reporting
Alarms & Presets
Alarm Options
Alarm Options - Alarm Zone Configuration
A1 A2 A4A3
GND
Main & Spot Monitors
485-bus
Remote Keyboard
Main & Spot Monitor

15
ENGLISH
Configuring the Digital Sprite 2
Using the menus
Digital Sprite 2 uses a paged menu system to guide the installer through the
installation process.
Entering the menus
There are two types of menu; User and Installer.
User Menu
To enter the User menu tap the Menu key.
Note: If a password has been set and enabled it will be necessary to enter the
User password to gain access to the menus. This is disabled by default.
The User menu will allows access to the ‘Time, Date & Language’ and
‘Schedule’ menus only.
The user has minimal configuration capabilities, these are to change the time
(in minutes only), date format, language, shutdown the system and set the
timezone in the Time, Date and Language menu and set the schedule options
in the Schedule menu.
Installer Menu
The Installer menu allows access to all configuration menus.
To enter the Installer menu, press and hold the Menu key.
Note: If a password has been set and enabled it will be necessary to enter the
Installer password to gain access to the menus. This is disabled by default.
Video Switchers
Video switchers allow multiple Digital Sprites to be controlled from a single pair
of monitors. This allows the flexibility of controlling up to 256 cameras from a
single location without having to purchase extra matrix equipment. The Video
Switcher routes the monitors from the Digital Sprite 2 being controlled to the
operator’s monitors. Up to 16 control positions can have monitor switching.
The example below shows two Digital Sprites controlled from individual control
points. The Video Switcher routes the monitor outputs from the DVR’s to the
control points:
Tip: Each 485-bus device is supplied with a 2m 485-bus cable. To extend the
distance between devices, two 485-bus junction boxes and 12V-power supply
are required. A total distance for the whole 485-bus network can be up to
1500m (4900ft).
Main & Spot Monitors
485-bus
485-bus
Remote Keyboard Remote Keyboard
Main & Spot Monitor Main & Spot Monitor
Video Switcher
485-bus

16
ENGLISH
161616
Navigating a menu
The menus are displayed with options on the left-hand column and settings in
the right hand column. A cursor (highlighted text) can be moved using the
cursor keys on the front panel, or the joystick on the optional
remote keyboard.
To view the next menu
Tap the Menu key to view the next page.
Tip: Tapping the orkeys will allow you to navigate back or forward one
page in the menus.
To exit the menus
Press and hold the Menu key to exit the menus.
Tip: Cycling though all the menus by tapping the Menu key will also exit.
Time, Date & Language
Time & Date
Date Format
Language
System shutdown
Timezone
Cursor
Options Settings
S 15:38 24/Nov/2004
Day, Month
English
Disabled
Greenwich Mean Time GMT +0
Example of using the menu to change the time:
1. Press and hold the Menu key to enter the installer menu. The ‘Time, Date &
Language’ page is displayed.
2. The ‘Time & Date’ option will be highlighted use the button or the
keyboard joystick to move to the hours setting.
3. Use the button to highlight the minute setting.
Time, Date & Language
Time & Date
Date Format
Language
System shutdown
Timezone
S 24/Nov/2004
Day, Month
English
Disabled
Greenwich Mean Time GMT +0
15:38
Time, Date & Language
Time & Date
Date Format
Language
System shutdown
Timezone
S 24/Nov/2004
Day, Month
English
Disabled
Greenwich Mean Time GMT +0
3015:
Time, Date & Language
Time & Date
Date Format
Language
System shutdown
Timezone
S 15 24/Nov/2004
Day, Month
English
Disabled
Greenwich Mean Time GMT +0
:30

17
ENGLISH
Time, Date & Language
4. Use the button to change the settings, in this example 15:45.
5. Use the button to return to the left-hand side of the page and select
another option. Or press the Menu key to move to the next menu.
WARNING: Images may be overwritten if the time or date is adjusted
whilst recording is in progress.
Time, Date & Language
Time & Date
Date Format
Language
System shutdown
Timezone
S 15 24/Nov/2004
Day, Month
English
Disabled
Greenwich Mean Time GMT +0
:45
Time, Date & Language
Time & Date
Date Format
Language
System shutdown
Timezone
S 45 24/Nov/2004
Day, Month
English
Disabled
Greenwich Mean Time GMT +0
15:
Date
As default, the date is entered DD:MM:YYYY, this can be changed using the
Date format option below.
Time
The time should be entered in 24 hour format (HH:MM).
Date format
The date format can be changed from (Day, Month) to (Month, Day) depending
on regional preference.
Language
The menus can be displayed in a number of languages. Upon selection these
are presented as a drop down list with the following language options:
Time, Date & Language Time & Date 15:38 22/12/2204
Date Format Day, Month
Language English
System shutdown Disabled
Timezone Greenwich Mean Time GMT +0
Month, Day
French, German, Spanish, Italian, Russian
Czech, Polish, Dutch, Hungarian, Swedish
Enabled
English
French
German
Spanish
Italian
Russian
Czech
Hungarian
Swedish
Polish
Dutch
!

18
ENGLISH
181818
Camera Viewing
It is possible to define the cameras that can be viewed on the main or spot
monitor, the options are all cameras or selected cameras. All the cameras can
be viewed by default.
Note: Cameras that are selected within this menu for viewing will not affect the
cameras that are selected to record.
Cameras removed from the view option are not displayed on the main or spot
monitor in live or playback mode and multiscreen display will show a blank
segment where the camera should be.
To change the cameras to be viewed
Press the button to change the edit field to ‘Selected cameras’.
A menu will display the cameras to be viewed.
Press a camera key to toggle the camera in or the viewing option. A filled box
denotes cameras that can be viewed.
Tip: It is advisable to set a password to stop this setting being altered by
unauthorised personnel.
System Shutdown
The Digital Sprite 2 can be shutdown from this menu.
Some menu changes would require the unit to be reset, for example changes
within the System Features menu.
To reset the Digital Sprite:
1. Use the key to highlight the ‘System Shutdown’ option.
2. Select Enable, a prompt will be displayed.
3. Press and hold the Camera 1 key for 5 seconds. The unit will shutdown,
where a prompt will appear to say you can switch the unit off.
To abort the reset, press the Menu or Mode key.
Note: Shutting down your Digital Sprite 2 by any other method will put the
integrity of your DVR at risk. If your Digital Sprite 2 is shut down in any
uncontrolled manor (power off at mains or removing the power lead) more than
5 times in one hour, it will go into Engineering Bootloader mode for
approximately fifteen minutes and then will reboot in normal mode.
Tip: You can restart the unit from the ‘Systsem Shutdown’ option by pressing
and holding Camera 4.
Timezone
There are numerous time zones supported on the Digital Sprite 2, select the
zone for where the unit is installed so the time and date will reflect the local
time and will change in conjunction with Daylight Saving Time.
Camera Viewing
View All cameras All cameras, Selected cameras
Selected Cameras 12345678
9 10111213141516