vitaaudio R1 DAB FM User manual
R1 DAB FM
Tabletop Radio
User Guide
auto tune
external speaker (R)
12VDC1.5A
out (L)
line out (R)
OK
Important information:
Please read this manual carefully before operating your R1 and retain for future reference. Quick Start
2Connect power
5 Change station
to tune
OK to select station
OK
234
5
1
SOURCE
INFO
ALARM
SLEEP
3 Switch on
1Extend aerial
Ensure aerial is fully
extended
4 Wait.....
Automatic tuning will
find all available stations
OK
234
5
1
SOURCE
INFO
ALARM
SLEEP
Controls
SOURCE
Change source
press SOURCE to cycle between
DAB, FM and AUX
Standby - press to switch ON/OFF
Volume - rotate
Snooze - press when the alarm
sounds to activate 5 minute timer
Cancel alarm - press and hold
PRESETS
Select preset station - press
Store station - press and hold
SLEEP
Setting sleep
press and hold SLEEP
to toggle sleep ON/OFF
OK to confirm
to change sleep duration
OK to confirm
Check current settings
press SLEEP
Quick ON/OFF
press SLEEP
press and hold OK
ALARM
Setting alarm
press and hold ALARM to view setup
to toggle alarm ON/OFF
OK to confirm
to change alarm time
OK to confirm
to toggle alarm BUZZ/RADIO
OK to confirm
View current settings
press ALARM
Alarm ON/OFF
press ALARM
press and hold OK
INFO
Change on screen information
press INFO
DAB mode
●Artist / track name / program details
●Signal strength
●Program type - e.g. classic, pop
●Data rate - in kilo bits per second
●Multiplex name - station network
●Time and date
FM mode
●Artist / track name / program details
●Signal strength
●Program type - e.g. classic, pop
●Station name
●Audio mode - auto (stereo) or mono
●Time and date
Manual tune
press and hold INFO
- change frequency
OK key to confirm.
Getting to know your R1 Other functions
auto tune
12VDC1.5A
line out (L)
line out (R)
vitaaudio
3.5mm headphone socket
12VDC 1.5A
Adapter connector
Auto tune
Detect and store new stations
available in your area
press - quick scan
press and hold - full scan
Aux line input
Connect an external source
e.g. MP3 player
Line out (L) (R)
Connect to external
amplifier or recording system
FM mode - Mono / Stereo switching
In FM mode the R1 will automatically select Mono or Stereo mode
depending on the signal strength. To reduce any background hiss
you can manually switch the R1 from Auto (stereo) to Mono mode.
Press and hold OK to switch between Auto (stereo) and Mono.
Secondary stations
Some stations have one or more secondary services associated
with them. When secondary stations are available a sign is
shown after the station name:
Press OK to select between the secondary station/s and the
primary station.
System Reset
System Reset restores the R1 to the default factory settings
and will initiate a new DAB station scan.
Press and hold INFO until the display shows:
Press INFO key and the display will show:
Press OK to confirm
Maintenance
To maintain your radios performance and finish please:
●Clean with a soft lint free duster or slightly dampened cloth.
●Protect the RotoDial, drive unit and contacts from wax sprays and other
substances. Contact with these substances may degrade the system’s
performance.
●Natural wood finish cabinets will vary and lighten or darken with age
particularly when exposed to sunlight.
●Do not expose your R1 to direct sunlight, high humidity, dust, excessive
vibration or extreme temperatures all of which can affect the finish,
performance and reliability of the unit.
●The recommended operating temperature range for the R1 is 5°C to 40°C.
●Make sure that liquids, including rain, cannot penetrate the unit.
Specifications
R1 DAB/FM table top radio
DAB Band III DAB
FM 88MHz to 108MHz
Output power 7W nominal
Driver 3.5” full range
Power requirements 12VDC 1.5A
Dimensions 170H x 130W x 130D
Weight 2KG
R1 power adapter
Input power 100V to 240VAC 50-60Hz 0.5A
Output power 12VDC 1.5A
Guarantee for Overseas Sales
The distributor in the country of purchase guarantees products purchased
outside the UK. For details, please contact your local Vita Audio distributor
or outlet.
THIS GUARANTEE IN NO WAY VARIES OR REMOVES THE
PURCHASERS STATUTORY RIGHTS. E&OE
Guarantee Information
Ruark Distribution Ltd guarantees this product to be free from defects for a
period of two years from date of purchase providing due care and attention
has been paid. Product failure through accidental damage (however
caused), excessive wear and tear, negligence or unauthorized modification
will void your guarantee.
Should you experience a problem with your radio please in the first instance
contact your dealer or if this is not possible contact us directly. Where
possible the product should be returned in its original packaging. If it is not
possible to return the product by hand, then it should be sent carriage
prepaid by a reputable parcel carrier. If the original packing is not available,
replacement packing can be purchased from us.
59 Tailors Court - Temple Farm Industrial Estate - Southend on Sea - Essex - SS2 5TH - UK
a division of
Table of contents
Other vitaaudio Radio manuals
