Vitek VIRTUOSO User manual

VITEK IVP, INC.
VITEK VIRTUOSO IP CAMERA
MANUAL
VTD-MV8NZ311P

!"#$ %&'(")* +",-./0*1$!"/$*Network
MENU CONTROL - CONTENTS
Network Menu Control . . . . . . . . . . . . . . . . . . . . . 1~4p
Full Menu Setup . . . . . . . . . . . . . . . . . . .. . . . . . . 4~51p
1. LIVE VIEW ................................................................... 4p
2. PLAYBACK.................................................................. 7p
3. SETUP .......................................................................... 8p
3-1. Information ............................................................ 8p
3-2. Video & Image....................................................... 9p
3-4-1. Source ..................................................... ... 9p
3-4-2. Stream ......................................................... 10p
3-2-5. Privacy Mask .......................................................... 21p
3-2-6. Digital Zoom ..........................................................
22p
3-2-7. DIS (Digital Image Stabilization) ...........................
22p
3-3. Audio ........................................................................ 23p
3-5. Record ..................................................................... 24p
3-5-1. Record .................................................................... 24p
3-4- dehcS .2 ule ................................................................ 24p
3-4-3. Recycling................................................................. 25p
3-4-4. Storage .................................................................... 25p
3-6. Event........................................................................ 26p
3-6-1. Triggers.................................................................... 26p
3-6-2. Actions .................................................................... 32p
3-6-3. Rules ...................................................................... 38p
3-2-3. Smart Video Stream
........................................ 11p
3-2-4. Image ................................................................ 13p
3-7. System ..................................................................... 41p
3-7-1. Security ................................................................... 41p
3-6-2. Date / Time
........................................................ 44p
3-6-3. Network .................................................................. 45p
3-6-4. Language ............................................................... 49p
3-6-5. Maintenance ........................................................... 50p
3-6-6. Log & Report .......................................................... 51p
VITEK IVP, INC.

VITEK IVP, INC.
28492 CONSTELLATION ROAD VALENCIA, CA 91355
WWW.VITEKCCTV.COM
Version 1.0
March 2020
LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK
warrants to the purchaser that products manufactured by VITEK
are free of any rightful claim of infringement or the like, and when
used in the manner intended, will be free of defects in materials and
workmanship for a period of three (3) years, or as otherwise stated
above, from the date of purchase by the end user. This warranty is
nontransferable and extends only to the original buyer or end user
customer of a VITEK Authorized Reseller.
The product must have been used only for its intended purpose, and
not been subjected to damage by misuse, willful or accidental damage,
caused by excessive voltage or lightning.
The product must not have been tampered with in any way or the
guarantee will be considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become
necessary.
VITEK makes no warranty or guarantee whatsoever with respect to
products sold or purchased through unauthorized sales channels.
Warranty support is available only if product is purchased through a
VITEK Authorized Reseller.

!"#$ %&'(")* +",-./0*1$!"/$*
Menu Control
Setup Menu table
1
01
Category
Menu
Configuration
LIVE VIEW
PLAYBACK(**)
SETUP
Player Control
Video Stream
Protocol
PTZ Control
Event Search, Timeline Search, Timeline Bar
Information
Video & Image
Audio
(*)
Record(**)
Source
General, System Information, Open source Information
Image
Display (Window Fit, Full Screen, Custom)
Stream1, Stream2, Stream3, Stream4
HTTPS, HTTP, TCP, UDP
Zoom, Focus, Direct Zoom(or Push AF)
Pause, Snapshot, Speaker(*), Microphone(*), Record(**)
Privacy Mask
Digital Zoom
Compression, Sample rate, Bitrate, Input Volume, Output Volume,
Audio auto activation on ONVIF access
Basic
Mode, R Gain, Gr Gain, Gb Gain, B Gain
Mode, Rotation
WDR(Mode, Level), DWDR(Mode, Level),
Defog(Mode, Level)
BLC(Mode, Level), HLC(Mode)
OSD
AE
AF(
***)
AWB
Day&Night
WDR
BLC
DNR
VerticalView
Color, Name
Schedule
Record
Overwrite when storage is full, Continuous record setting
Recycling
Enable Recycling, Recycling Time Setting(Month, Day, Hour)
Storage
Level
Format, Remove, Storage Information
Brightness, Contrast, Saturation,
Hue, Sharpness, Enable flip image,
Enable mirror image
Enable text OSD, Enable date&time
OSD, Enable zoom&focus OSD
(***)
Mode, Slow shutter, Auto Iris, Auto flickerless
Shutter, Max. Shutter, Gain, Max. Gain
Mode, Speed, Lens Locking, Lens Calibration,
Enable Day & Night sync focus,
Lens initialize on boot
Mode, Switching Time, Threshold,
)
DNR(Mode, Level
3
LDC
Mode, Level
DIS
ROI(Region Of Interest), Dynamic GOP
Smart
Video Stream
Stream1/2/3/4
IR LED Control

!"#$ %&'(")* +",-./0*1$!"/$*
Menu Control
SETUP
Event
Triggers
Motion, VCA, Alarm In(*), System, Manual,
Network, Timer, Day/Night
Actions
Record, Alarm Out(*), E-Mail, FTP, Video Boost,
Notification Server
Rules
Event Processing, ONVIF Mapping
System
Security
User, HTTPS, IP Filter, ONVIF, Video Stream,
Export/Import
Date & Time
Current Time, New Time, Time Zone, Date &
Time Display
Network
TCP/IP, DDNS, RTP, UPnP, Zeroconf, Bonjour
Language
English, Deutsch, Français,
Maintenance
Maintain(Restart, Reset, Default), Upgrade,
Setup Export, Setup Import
Logs & Report
Logs (Database Capacity, Search Condition, Log
List), Logs Server, Report
LOG OUT
(*) Available only withthe built-in Audio feature version
(**) Available only withthe built-in Storage feature version
(***) Available only withthe built-in Motor driven V/F lens version
Network Control menu Setup
1. After camera is connected with server, install the IP Manager. Control is available via
WEB.
2. Make sure the server is connected before accessing IP MANAGER.
3. After installing, double clicking IP MANAGER’s icon to start.
4. The Camera is automatically scanned when IP MANAGER is running.
5. If you double-click the model name on IP Manager, it goesto Login page.
6. Install Active-X. according to the
instruction at the bottom of browser.
The default username / password
are ‘admin’.
• OS: Windows 7 or higher/ MAC OS
• Web browser:
* Log-in the Web-Viewer
* SYSTEM Requirements
VITEK IVP, INC.
2

Full Menu Setup
- MS Internet Explorer (Ver. 9 or higher)
- Mozilla Firefox: Windows Only
- Google Chrome: Windows Only
- Apple Safari: Mac OS X only
• Supports only officially released version.
02
The default IP address of cameras are 192.168.1.10.
If you want to change IP address, click right button of Mouse and there is control
panel. Type the IP address to change and click OK button.
> "Change all connected camera’s IP address at once:
1) Right click mouse and choose “Change IP”.
2) Open the Change IP control panel.
3) Type the IP address to change and click OK button.
4) Change all the selected camera IP address in order.
A Model Name: Showthe connected camera model number.
B IP Address: Showthe IP address of connected camera.
Stop Discovery
Refresh
Default Login
S/W Version
* Change IP Address
* IP MANAGER description
VITEK IVP, INC.
3

!"#$ %&'(")* +",-./0*1$!"/$*
Menu Control
A - Version: Showthe camera F/W version.
B - Chane IP: Available to change IP.
C - Quick View: Available to have Quick View after Login.
D - Login: Available to Login(admin/admin) and then Quick View.
E - Maintenance: Factory default/ Reset/Reboot are available.
F - Upgrade: Able to upgrade camera firmware.
G - Web Browser: Go to Web browser.
03
1. LIVE VIEW
Enter the live view menu on the Web Viewer.
Web Viewer description
A) Menu button: Click the button to show or hide the setup menu bar.
B) Model name: Shows the camera model name connected.
C) Main setup menu bar: Set the camera or network functions.
D) Camera monitoring window: Display the currently connected camera view or
function.
E) Log out and exit the web viewer
XXX-XXXX-X
XXX-XXXXXXXX
XX
A
B
D
E
C
4
VITEK IVP, INC.

Full Menu Setup
VITEK IVP, INC.
2Snapshot: Captures the image in.jpg format
withthe current stream resolution.
3Speaker: (Available only with the built-in
Audio feature version) Enables Audio to be
outputted to the audio out port.
4Microphone: (Available only with the built -in Audio feature version) Enables
Audio input from the audio input port.
5Record: (Available withthe built-in Storage feature version only)
Records the live video in H.264 format into the equipped storage memory like SD,
SDHC & SDXC with the selected video stream at the RECORD menu.
04
1
2
3
4
5
* Player Control 1Pause: Pauses the live view.
5

VITEK IVP, INC.
Window Fit: Resizes the live view display tofit
the display window size.
7 Full Screen: Resizes the live view display tofit
resolution.
ESC key returns tothe previous view.
Custom: Selects the live view display scale, 0%~200%, by the control bar. 100%
is original size.
Video Stream
Selects the video source streamto display.
Protocol
Selects the network protocol HTTPS, HTTP, TCP or UDP.
PTZ Control
(Available with AF version & the built-in motor driven V/F lens version only)
• ZOOM: Controls the lens optical zoomin/out for WIDE & TELE.
• FOCUS: Adjusts the lensfocus manually for NEAR & FAR.
• PUSH AF: Starts auto focus at the push of a button.
NOTE
ZOOM, FOCUS & PUSH AF are disabled when PTZ control is locked.
PTZ control can be unlocked at Setup>Video & Image>Image>AF>Lens Locking to
OFF or TIMER.
CAUTION
• Set LENS LOCKING at Setup>Video & Image>Image>AF>Lens Locking to ON or
TIMER after completing lens setting to prevent unwanted lens operation.
6
8
8
Full Menu Setup
to the monitor
6
8
6

VITEK IVP, INC.
• Do not adjust zoom/focus inlow light conditions or night mode. It might cause
erroneousfocusing.
• For V/F versions, Zoom/Focus operation is strongly recommended for installation
purpose only. Frequent zoom/focus adjustments can reduce the life span of the lens.
05
2. PLAYBACK (Available only with the built-in Storage feature version)
Event Search
Playback display using the event list.
• Press the input bar to pop up EVENT DATE & TIME window and select the event
TYPE.
• Click SEARCH button to show EVENT LIST.
• Select the recorded event and click the play button at the bottom-left corner of the
playback window.
Timeline Search
Playback display by Date & Time for continuous and event recording.
• Select the date in the SEARCH CALENDAR and then the hour & minute at TIMELINE
BAR.
Full Menu Setup
7

VITEK IVP, INC.
06
3. SETUP
Enter the setup menu on the Web Viewer.
3-1. Information
Shows the overall information about the system such as Model name, MAC address, IP
address, Zeroconf, IP address, Firmware version, Servertime, Running time, CPU usage,
Inbound/Outbound Bandwidth and Open source list.
Full Menu Setup
8

Full Menu Setup
VITEK IVP, INC.
3-2. Video & Image
3-2-1. Source
• SIGNAL: Set NTSC/PAL mode depending on TV system. Generally set to NTSC in
60Hz area and PAL in 50Hz area for the electrical power system of your country.
Changes will restart the camera
.
07
3-2-2. Stream
9

Full Menu Setup
VITEK IVP, INC.
Stream1, 2, 3, 4
> COMPRESSION: H.265(+) and H.264(+) are available in all stream but MJPEGis
available in Stream 3, 4 only.
• H.265+, H.264+: Enables to process video data smartly according to users demand
and lowering overall bandwidth, and reduce the storage burden.
If H.265+ or H.264+ is selected, Smart Video Stream and Dynamic GOP are switched
ON automatically.
Accordingly, ROI (Region of Interest) and Dynamic GOP should be set in Smart Video
Streammenu to use H.265+ and H.264+.
> RESOLUTION: Each stream can have its individualresolution selected from its list.
> FRAME RATE: Each stream can have its individualframe rate in fps selected from
itslist. 08
> GOP SIZE: GOP(Group of Picture) definesthe number of Intra-coded pictures (I
frame) & Predictive-coded pictures (P frame) in H.264. I frame is a complete image
whilePframe isthe predictive image data which can lower the image data
dramatically between frames. GOP SIZE standsfor the number of Pframes between I
frames. Too small GOP SIZE (too frequent I frames) can degrade the picture quality
because the codec compresses the data to strongly to maintain the bitrate. On the
contrary, a little bigger GOP SIZE can improve the picture quality with better quality for
Pframes if the network isin good condition. Too big GOP SIZE can make a longer black
out or a broken image if the network qualityis not good enough.
> BITRATE CONTROL: Selects howto manage the bitrate.
• VBR(Variable Bit Rate):
Provides the higher image quality with the optimal variable bitrate for the scene
which has more moving elements in the image. It is not recommended when
network isin heavy duty.
• CBR (Constant Bitrate):
Tends to keep the bitrate steady at the assigned bitrate within a very small variation.
It is useful when the network is in very heavy use.
> BITRATE: Indicates the transmission speed through the network and defines the
overall picture quality along with the image resolution, frame rate, GOP size and the
compression codec for H.265, H.264. A high value provides as higher image quality
but the total sum of bitrates for the streams has to be considered in calculating the
network duty.
> BITRATE Quality: Enables to set the quality.
10

Full Menu Setup
VITEK IVP, INC.
3-2-3. Smart Video Stream
ROI (Region Of Interest)
> Enables to process video data smartly according to user’s demand.
> Available to deliver high quality video on interested region while less quality video on
non-interested region.
> Lowering overall bandwidth and reduce the storage burden.
> How to set Region of Interest:
1) ENABLE checkbox to enable ROI function. 2) Click the
right mouse button on the video viewer, select "Create
ROI area" menu and Drag the ROI area.
3) After drag, enter a Name, select Quality and save.
09
11

Full Menu Setup
VITEK IVP, INC.
12
4) ROI frame rate is available in Settings> Video & Image> Video Stream.5) To delete
the selected area, right Click the mouse button on the video viewer, select "Create
ROI area" or click “Delete” button.
6) After setting the mode, click SAVE.
> How to set non-Region of Interest:
Set the frame rate (non-ROI frame rate) for each stream and click SAVE.
Dynamic GOP:
> Outputs Intra-coded pictures (I frame : Complete Image)
When there is motion or change in picture only to save bitrate.

Full Menu Setup
VITEK IVP, INC.
13
GKFL &FK&KM""KNOL KOHL
; ? 5 F

Full Menu Setup
VITEK IVP, INC.
14
Basic
> BRIGHTNESS: Adjusts the overall brightness of the scene. Increasing the value
increases the brightness.
> CONTRAST: Adjusts the contrast of the scene. Increasing the value increases the
contrast.
> SATURATION: Adjusts the color richness of the scene. Increasing the value
increases the color richness.
> HUE: Adjusts the color hue (NTSC only). Decreasing the value produces a greenish
hue and increasing the value produces a pinkish hue.
> SHARPNESS: Adjusts the sharpness of the scene. Increasing the value increases
the sharpness.
> ENABLE FLIP IMAGE: Flips the image on horizontal axis (up and down).
> EABLE MIRROR IMAGE: Mirrors the image on vertical axis (left and right).
OSD
> ENABLE TEXT OSD: Enables display of the Text typed in the TEXT field (displays
bottom-right).
> ENABLE DATE&TIME OSD: Enables display of the Date & Time (displays top left). >
ENABLE ZOOM&FOCUS OSD: Enables display of the Zoom Ratio & Focusing Mode.
(displays top-right). (Applies to Built-in Motor driven V/F lens and AF models only)
> MODE: Allows you to select when the ZOOM&FOCUS OSD is displayed.
• ON PUSH: Displays on the OSD for a few seconds while lensis adjusting.
• ALWAYS: Displays on the OSD at all times.
VITEK IVP, INC.

Full Menu Setup
15
AE
> MODE: Selects how to control the exposure, AUTOMATIC or MANUAL. > SLOW
SHUTTER: Extends the shutter time over the maximum shutter time of value in
SLOW SHUTTER. Increasing the value increases brightness but also increases
blurriness.
> AUTO IRIS: Engagesthe mechanical iris of lensto control the amount of incoming
light to the sensor.
• OFF: Iris opens, and the shutter is engaged to control the video level.
> AUTO FLICKER LESS: Automatically detects and fixes the flickering image under
fluorescent lighting caused by the mismatch between NTSC/PAL and 50Hz/60Hz
electric power frequency.
> SHUTTER: (Available only in MANUAL mode) Sets the shutter toafixed value. >
MAX. SHUTTER: Sets the maximum exposure time to limit long exposure at night
or inlow-light scenes.
> GAIN: (Available only in MANUAL mode) Sets the overall video gain.
> MAX. GAIN: Sets the maximum gain that can be automaticallyreached at night or
in low-light scenes.
AWB
> MODE: Provides White Balance presets. ATW or Manual is recommended for most
applications.
> R GAIN / Gr GAIN / Gb GAIN / B GAIN: (Available only in MANUAL AWB mode)
Adjusts the white balance by Cb/Cr color components tothe specific lighting which
has a fixed color temperature. Not recommended for regular scenes.
VITEK IVP, INC.

Full Menu Setup
VITEK IVP, INC.
16
AF (Available with the built-in motor driven V/F lens version only)
> MODE: Selects howto control the focus of the built-in Motor driven V/F lens or AF lens.
• MANUAL: Focusing works during zoom operation only and stops thereafter.
• AUTOMATIC: Focusing works steadilyfor sharp focusing on the object. Inthe case
of a Motor driven lens, focusing resumes in about 7~8 secondsto save the lens
lifetime when the focus gets lost.
[ NOTE]
1) MANUAL mode is strongly recommended to maintain the working-life of the lens.
2) Lens operation count is stored inthe camera for service purposes.
> SPEED: Adjusts the zoom control speed. Increasing the value increases the speed.
> LENS LOCKING: Allows locking of the lens control to prevent undesirable operation.
• OFF: Disables the locking feature allowing lens operation at any time.
• ON: Locks and disables the lens operation immediately.
• TIMER: Locks and disables the lens operation after a certain period of time, as set
in LOCKING TIMER.
> LOCKING TIMER: Defines the amount of time before the lens is locked.
> LENS CALIBRATION: Calibrates and renews the lens data as setup at the Factory.

Full Menu Setup
VITEK IVP, INC.
17
[ WARNING ]
LENS CALIBRATION is not necessary for regular installations.
LENS CALIBRATION would only be necessary should you not be able tofocus the
lens after a zoom operation due to shock during transportation of the camera.
To perform LENS CALIBRATION.
- A fixed object with sharp edges should be at least 10 feet away in front of the
camera and should be stationary i.e. not moving. A plain wall is not suitable to
calibrate on.
- The camera must be steady without vibration, during the calibration. - Scene
light level must be bright enough. Do not try calibration at night or in low light. - If
the calibration fails, change the environment and try again.
> ENABLE DAY&NIGHT SYNC FOCUS: Enables refocusing whenever the day/night
changes. It is not recommended to use this feature as it may lose focus over the
night due tofocusing failure at night.
> LENS INITIALIZE ON BOOT: Mark ENABLE checkbox to enable lens initializing
when camera is booting.
Day & Night
> MODE: Selects howto control the day/night feature.
• DAY: Disables the switching day/night filter and fixesit to DAY (color) only.
• NIGHT: Disables the switching day/night filter and fixesit to NIGHT (B/W) only.
• AUTOMATIC: Allows the day/night filter to switch via the amount of the incoming light
through the lens only. Cameras without the built-in IR LED must select AUTOMATIC.
• EXTERNAL: Allows the day/night filter to switch via the built-in light sensor only, like
a photo sensor. Cameras with built-in IR LED must select EXTERNAL.
• COLOR DN [AUTOMATIC]: Produces color video at night without switching day/ night
filter. Values in BRIGHTNESS, CONTRAST&SATURATION at SETUP>VIDEO&
IMAGE>IMAGE>BASIC>DAY or NIGHT are applied tothe scenes for day and night
accordingly.
> SWITCHING TIME: Delays switching the day/night filter to prevent from an undesirable
transition.
> THRESHOLD [D->N]: (Available in AUTOMATIC mode)
Sets the threshold level for day->night switching. Decreasing the value switches at low
light
> THRESHOLD [N->D]: (Available in AUTOMATIC mode)
Sets the threshold level for night->day switching. Increase the value to switch at high
luminance.
> THRESHOLD [Current]: (Available in AUTOMATIC mode)
Shows current threshold level.