VITINNI JF07520251 User manual

For further assistance, other products and more, join us at:
Website: www.vitinni.co.uk
Instagram: @vitinniuk
Facebook: www.facebook.com/vitinni
8 in 1 Grill
PLEASE READ AND KEEP THESE INSTRUCTIONS FOR FUTURE USE
SAP Code: JF07520251
2
INTRODUCTION
Thank you for choosing our Vitinni 8 in 1 Grill. Please read this user manual carefully
before use and keep it for future reference. The manufacturer and importer do not
accept any liability if the information in these operation instructions is not complied
with. If you need any assistance, please contact our customer service team using
the details provided on the back page of this manual. Basic safety precautions
should always be followed when using this appliance.
SAFETY INSTRUCTIONS
This appliance is for indoor use only.
This appliance is for domestic use only and should not be used for commercial
purposes.
Check that the voltage on the rating plate corresponds with that of the local network
before connecting the appliance to the mains power supply.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge providing they have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards involved. Cleaning and
user maintenance shall not be undertaken by children unless they are older than 8
years and supervised.
This is not a toy - children should be supervised to ensure they do not play with the
appliance. Keep the appliance and its cord out of reach of children less than 8 years.
If the appliance, power supply cord and plug are malfunctioning or they have been
dropped or damaged switch off the appliance and discontinue use immediately.
This appliance contains no user serviceable parts. Repairs should only be
undertaken by the manufacturer, its service agent or a similar qualified person.
If the power supply cord is damaged, it must be replaced by the manufacturer, its
service agent or a similar qualified person in order to avoid a hazard.
Keep the power supply cord away from sharp edges and parts of the appliance that
may become hot during use. Do not allow the power supply cord to overhang the
worktop.
Do not use this appliance with an extension lead or multiple socket adaptor.
Do not use this appliance near an open flame or in moist or damp conditions.
Allow sufficient space around the 8 in 1 Grill for ventilation and heat dissipation.
Place on a flat, stable, heat resistant surface a minimum distance of 5 to 10 cm from
walls and other items.
Do not leave the appliance unattended whilst connected to the mains power supply.

3
Switch off the mains power supply and remove the plug by hand.
Always disconnect the appliance from the power supply before assembling,
disassembling or performing cleaning or maintenance.
Do not immerse the 8 in 1 Grill, power supply cord or plug in water. Care should be
taken to avoid spillage on the electrical components, power cord and plug. Do not
operate the appliance with wet hands.
Do not use any accessories or attachments with the appliance that have not been
supplied or recommended by the manufacturer.
This appliance is not intended to be operated by means of an external timer or
separate remote control system.
Ensure that the air vents of the 8 in 1 Grill are not covered and there is sufficient
space for the warm air exhaust to dissipate.
Extending the recommended cooking times, overfilling or placing food too close to
the heating element could lead to food burning. If the appliance begins to smoke,
unplug the 8 in 1 Grill immediately. When it is safe to do so clean any residual food
and oil from the Air Fryer and accessories.
Ensure the grill is clean and dry before using the 8 in 1 Grill.
Do not use liquids, plastic dishes, bowls or cling film inside the 8 in 1 Grill and do not
fill the tray with oil or fat.
The 8 in 1 Grill has a built-in safety switch and will switch to Standby mode if the lid
is opened.
Nominal voltage is still present even when the 8 in 1 Grill is in Standby mode. To
permanently switch off the 8 in 1 Grill, ensure it is turned off at the mains power
supply.
Caution: Misuse of the appliance could cause injury – do not use the appliance for
anything other than its intended use
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
Caution: Hot surface. To avoid injury do not touch the hot or heated
surfaces of the 8 in 1 Grill. The heated surfaces and heating element may contain
residual heat and still be hot after use. Allow the 8 in 1 Grill to cool fully before
moving or handling.
The outer surface may become hot when the appliance is operating.
4
The basket and grill will become hot when the 8 in 1 Grill is in use. Use heat
resistant gloves when inserting or removing hot accessories from the 8 in 1 Grill.
Steam may be emitted from the Air Fryer lid/vents during the cooking process, when
it is opened and during or shortly after cooking has finished. This is a normal part of
the cooking process especially when cooking frozen food and food containing a lot
of moisture.
CLEANING & MAINTENANCE
Unplug the product from the mains power supply and allow to cool fully before
performing any cleaning or maintenance.
Do not use strong detergent, sharp objects, brushes or other objects to clean the
product and accessories as this could cause damage to the finish. Do not immerse
the main unit in water. All parts are not dishwasher safe.
Remove the Splatter Shield from the underside of the lid by pressing the retaining
clip into the lid. With the retaining clip pressed, the Splatter Shield can be removed
Wash the grill plates, cooking pot, crisper basket and splatter shield in hot, soapy
water and allow to dry naturally. Use the cleaning brush to help remove stubborn
and burnt on food.
Wipe the 8 in 1 Grill with a soft, damp cloth and a small amount of mild detergent.
Replace the Splatter Shield by inserting one edge under the retaining tabs opposite
the retaining clip. Depress the clip, insert the Splatter Shield and release the clip.
STORAGE
Before storing, ensure that the [product] is cool, clean and dry.
Reassemble all of the parts and wrap the power cord loosely around the body of the
8 in 1 Grill. Never wrap the cord tightly to avoid causing damage.
Store in a cool, dry place away from direct sunlight.
TECHNICAL SPECIFICATIONS
WEEE INFORMATION
The symbol on this product or its packaging means that this product
should not be treated as household waste. It should be handed to an appropriate
collection point for the recycling of electrical and electronic equipment. Contact your
local council or household waste disposal service for further information.
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities.
Voltage Wattage Frequency Capacity Temp. Range Timer
220-240V~ 1500-
1700W 50-60Hz 4L 50-230°c 1 min—24 hours

5
DESCRIPTION OF PARTS
CONTROL PANEL DIAGRAM
Lid
Main Body
Splatter Guard
Air Vent
Air Exhaust (on reverse)
Handle
Control Panel
and Display
Retaining Clip
Symbol Function Symbol Function Symbol Function
On/Off Button Manual Mode
Button
Pizza Mode
Button
Time
Adjustment
Grill Mode
Button
Broil Mode
Button
Temperature
Adjustment Grill Heat Indicator Lights
Bake Mode
Button
Preheat
Indicator Light Air Crisp Mode Button
Roast Mode
Button
Add Food
Indicator Light Dehydrate Mode Button Start/Stop Button
Time/Temperature Display
Tray Grill Basket Cleaning
Brush
6
PRESET SETTINGS
Recommended Grill Settings
BEFORE FIRST USE
Before use, remove all packaging materials. Check all accessories are complete and
that the equipment is not damaged. The 8 in 1 Grill should be cleaned according to
the instructions in the Cleaning and Maintenance section. The 8 in 1 Grill should be
run through an operational cycle before it is used for the first time.
When using the 8 in 1 Grill for the first time a slight odour may be emitted. This is
normal and will soon subside.
Mode Time
(default)
Temp.
(default)
Time
range
Temperature
range
Accessories
Reqd.
Air crisp 18 mins 205°c 1—60
min 50-230°c Tray and Basket
Dehydrate 6 hours 50°c 30 min—
24 hours 50-90°c Tray
Pizza 25 mins 195°c 1—90
min 50-205°c Tray and Grill
Roast 25 mins 205°c 1 min—4
hours 50-220°c Tray
Bake 25 mins 175°c 1min—2
hours 50-205°c Tray
Broil 10 mins 205°c 1 min—
60 min 50-230°c Tray
Grill 20 mins
Low
(150°c)
1 min—
30 min
Not
adjustable Tray and Grill
Medium
(175°c)
High
(205°c)
Maximum
(230°c)
Manual 1 min 50°c 1 min—2
hours 50-230°c
Tray and
Basket or
Grill
Low (150°c) Medium (175°c) High (205°c) Maximum (230°c)
Bacon Frozen meats Steaks Fruit
Sausages Marinated meat Chicken wings Frozen seafood
Slow BBQ style
cooking Whole Chicken Kebabs
Calzones Hot dogs

7
INSTRUCTIONS FOR USE
1. Place the 8 in 1 Grill onto a flat, stable and heat resistant surface and insert
the required accessory or combination of accessories.
2. Connect the 8 in 1 Grill to the mains power supply. The display and control
panel will light up momentarily and then go dark to show that power has been
connected.
3. Press the On/Off ( ) Button to turn on the 8 in 1 Grill. The control panel will
light up.
Programming the 8 in 1 Grill
3. The 8 in 1 Grill can be programmed with one of the following modes:
Air crisp: For crisp and fry with little to no oil required
Roast: Roast meat, vegetables, etc. with circulating hot air
Dehydrate: Dehydrate meat, fruit, or vegetables for homemade snacks
Bake: Bake cakes and snacks with lower temperature circulating hot air
Pizza: Cook pizza up to 8 inches diameter
Broil: Cook meat, vegetables etc. with high temperature top-down heat
Grill: Fast, high temperature cook and colour of meat & vegetables
Manual: Select cooking time and temperature for user preference
Press the text on the control panel to select the desired mode.
4. The cooking time and temperature can be adjusted from the default values
according to user preference.
To adjust the cooking time or temperature , press either the arrow to
decrease or arrow to increase in the following increments:
Time
 single press: 1 minute increments (Dehydrate Mode: 30 min increments)
 press and hold: 5 minute increments
Temperature
 single press: 5°c increments
 press and hold: 10°c increments
 Grill mode single press: cycle through Low, Medium, High, Maximum
Note: When using Grill mode, the temperature settings are not adjustable from
the Low, Medium, High, Maximum presets.
8
Preheating the 8 in 1 Grill
Broil and Dehydrate modes do not automatically preheat the 8 in 1 grill. Proceed to
Step 6 if using these modes.
5. Press the “Start/Stop” button to automatically begin pre-heating the 8 in 1
Grill. Once preheating has begun the preheat light will remain lit on the control
panel as well as the “Start/Stop” button.
If preheating of the 8 in 1 Grill is not desired, once the “Start/Stop” Button has
been pressed, press the selected mode button and move to step 6.
Once the 8 in 1 Grill has pre-heated the “add food” indicator light will show on
the control panel, the mode light will flash and the 8 in 1 Grill will beep 5 times.
Note: If the lid is not opened following the preheating cycle the 8 in 1 Grill will
maintain the desired cooking temperature with the “add food” indicator light
showing for 30 minutes before sounding 5 beeps and shutting down.
This will also happen if the lid is not opened and closed when trying to bypass/
cancel the preheating cycle.
Starting the Cooking Process
6. Open the lid, place the food into the 8 in 1 Grill and shut the lid again. The
cooking process will automatically begin.
If using Broil or Dehydrate mode, press the “Start/Stop” button to begin the
cooking process.
Once the cooking process has begin, the Time/Temperature Display will
alternately show the set temperature and a countdown timer of the cooking
time with flashing Hour/Minute Separator.
Interrupting, and pausing the cooking process
7. To interrupt the cooking process, for example: to check on progress, open the
lid. The 8 in 1 Grill will automatically pause the cooking process and resume
once the lid is replaced.
Note: If the lid is opened during the cooking process and not replaced, after 4
minutes the 8 in 1 Grill will emit two reminder beeps every 10 seconds for a
further minute before shutting down.
8. To pause the cooking process press the “Start/Stop” button. The process will
resume when the “Start/Stop” button is pressed again.
Making adjustments during the cooking process
9. To adjust the cooking time or temperature during the cooking process, press
the appropriate decrease/increase ( / ) arrow to adjust. The display
will flash for a few moments after the desired setting has been selected before
the change will be made.

9
10. To change the cooking mode, pause the cooking process with the “Start/Stop”
button and then select the new cooking mode on the control panel. When the
mode is chosen, press the “Start/Stop” button again to begin the new cooking
process.
Finishing the cooking process
11. Once the cooking process is complete, the 8 in 1 Grill will emit 5 beeps and
the Time/Temperature Display will show the word “END”.
The fan will run for a further minute to cool the heating element before the
8 in 1 Grill shuts down. The 8 in 1 Grill will then emit a further 5 beeps as a
reminder.
Guarantee
Our products are guaranteed for a period of 2 years from the date of purchase.
Products that develop a fault within this period are covered by our warranty and we
will replace defective parts, or where not available the whole product. The warranty
does not apply to any defect in the goods arising from fair wear and tear, wilful
damage, accident, negligence by you or any third party, use otherwise than as
recommended by us, failure to follow our instructions, any alteration or repair carried
out without our approval or has been the subject of commercial use. Your statutory
rights remain unaffected, in particular any rights you have under the Consumer
Rights Act 2015.
If you have a problem with your product within this warranty period please contact
our customer services team.
In the event of changes to the specification of a product and we are not able to
replace parts, we will replace the whole product within the 2 year guarantee period
For products that fall outside of the 2 year guarantee, we will endeavor to provide
spare parts to purchase for as many of the replaceable parts as possible, but cannot
foresee specification changes or upgrades to products or parts outside of the initial 2
year period.
10
Customer Services:
If you would like further advice or information on your product, ensure you have the SAP
code ready and please get in touch with us at Vitinni on the contact options below:
SAP Code: JF07520251
Phone: [phone] (Mon – Fri 9am to 5pm)
Email: [e-mail]
UK Address: Vitinni, Vale Mill (Rochdale) Ltd, Robinson Street, Rochdale,
OL16 1TA, UK
EU Address: Vitinni, Delu-Ako Minky GmbH, Hauptstraße 103, 53619, Rheinbreitbach,
Germany