Vitruvi LT09333 Manual
STONE DIFFUSER GUIDEBOOK
2
3
Welcome to a whole new world. Whether you treated yourself to a diffuser
(yeah you did) or received it as a gift, we’re so excited for you. It’s a beautiful
way to create ritual throughout your day and to discover which scents you
love most. This guidebook is meant to help you learn the basics about your
diffuser and to inspire you to diffuse aromas that are as dynamic as you are.
TABLE OF CONTENTS
Usage / Page 04
Features / Page 07
Maintenance / Page 08
Troubleshooting / Page 10
4
USAGE
WHAT’S IN THE BOX
Throughout this guidebook, we refer to the
diffuser parts by the names you see below.
If you ever need clarication, just reference
this diagram.
Parts
Parts
c. Plastic lid
b. Spout
a. Stone cover
d. Water reservoir
e. On/off button and
power indicator
f. On/off button for
LED lamp
5
Take off the stone cover and the plastic
lid inside.
Fill up the water reservoir to the ll
line and add 10-15 drops of 100% pure
essential oils.
Place the plastic lid back on and slide
the stone cover on by aligning the hole
in the top of the cover with the spout.
Plug in your diffuser and choose your
time setting by clicking the large on/off
button at the base. One click turns on a
continuous 3-hour setting (green light),
while two clicks turns on an intermittent
7.5 hour setting (orange light).
The smaller on/off button at the base
will turn on the LED light, if you’re
looking to set the mood.
SETTING UP YOUR
DIFFUSER
01.
02.
03.
04.
05.
HOW MANY
DROPS?
For a room of approximately 500 square feet,
we suggest diffusing 10-15 drops of essential
oils, depending on how strong you’d like the
scent to be.
DIFFUSER
COCKTAIL RECIPE
You can always diffuse our single-origin
essential oils on their own, but it’s fun to mix
them and create your own custom aromas.
We like to call these creations “Diffuser
Cocktails”, because the process is similar to
whipping up a drink.
Diffuser Cocktail: Welcome Home
3 drops Eucalyptus essential oil
5 drops Lavender essential oil
3 drops Grapefruit essential oil
4 drops Spruce essential oil
6
Quick tip: on days when you can’t go for a hike, bring the
outdoors in with 5 drops of Spruce and 5 drops of Cedarwood
essential oil in the diffuser.
7
FEATURES
Safety-off Switch
No need to worry about whether you left
your diffuser on—it will automatically turn
off once it has run through its timed setting
or is out of water.
Voltage
Our diffusers have a voltage of 110-240 volts
and are compatible with North American
outlets.
DIFFUSER FEATURES
Ultrasonic Technology
Our diffusers run through vibrations
(2.5 million vibrations/second) instead of
emitting heat. This means the plastic, water,
and oils are never heated while diffusing,
and that the plastic never interacts with the
essential oils.
Handcrafted Stone Cover
Each of our diffusers are handmade using
only the highest quality materials.
BPA-free Plastic
The water reservoirs and plastic lids inside
our diffusers are made from high-grade,
BPA-free plastic.
8
MAINTENANCE
Cleaning your diffuser is really simple,
but also very important. To keep your
diffuser looking and working like new,
we recommend cleaning it every 2 weeks
or 7-10 uses.
Cleaning the Stone Cover
Remove the stone cover from the
base and run the whole piece under
warm water.
Apply a pea-sized amount of dish soap
to the cover and use your ngers to buff
out any marks or dirt. Note: do not use
fabric or other materials because the
stone’s surface can pick up bers.
Rinse the diffuser and set it aside to
air dry.
01.
02.
03.
9
01. Unplug your diffuser and remove the
stone cover.
02. Take off the plastic lid from the water
reservoir. Using a damp cloth, wipe the
inside of the water reservoir. 04. Turn the diffuser on and allow the
vinegar to run through the diffuser for about
30 minutes.
03. Plug in the diffuser and ll the water
reservoir with water ½ inch below the water
ll line. Add 2 tbsp of white vinegar to the
water reservoir and put the plastic lid and
stone cover back on.
Cleaning the Inside
10
If you’re having an issue with your diffuser,
try these quick xes rst.
If there is no mist coming out of your
diffuser:
Make sure the water is not higher than the
water line shown on the water reservoir. If
this doesn’t solve the problem, try emptying
the water reservoir and gently wiping it out
with a paper towel. Rinse out the plastic
lid as well, and follow the instructions for
cleaning the inside of your diffuser. If there
is still no mist coming out, don’t hesitate to
reach out to us.
TROUBLESHOOTING
If your diffuser is spilling water:
Don’t panic! First thing to do is to turn your
diffuser off. Make sure that the plastic lid
and the stone cover are properly in place. If
the diffuser continues to leak or spill water,
get in touch with us and we’ll happily help.
11
WARRANTY
At vitruvi we believe that everything should
have 3 components: functionality, durability,
and beauty. That’s why we offer a 1-year
warranty on all our diffusers. If anything
goes wrong with your diffuser within your
rst year, please reach out to us and we’ll be
happy to replace it.
REPLACEMENT PARTS
We know life happens—if you need to
replace a certain part of your diffuser at any
time, please reach out to us and we’d be
happy to facilitate getting you what you need
to have your diffuser working properly again.
Stone Covers - $20
Cords - $10
BPA Free Plastic Lid - $10
Model:
Dimensions:
Weight:
Power:
Power Consumption:
Frequency:
Materials:
LT09333
3.4 x 3.4 x 7 in | 86 x 86 x 179 mm
1.1 lb | .52 kg
Input: AC 100-240V 50/60Hz 0.5A | Output: DC 12V 1A
10 W, 100 hrs operation is 1 kw/h
Ultrasonic Vibration 2.5 MHz
Stone Cover: Porcelain
Base: ABS Plastic
Water Reservoir: Polypropylene
O-Ring: Silicon
Lens: Polycarbonate
SPECS
Get In Touch
Our team would love to chat or help with anything we can!
Table of contents
Other Vitruvi Accessories manuals
