Vitruvi STONE DIFFUSER User manual

STONE DIFFUSER MANUAL

Welcome to a whole new world. Whether you treated
yourself to a diffuser (yeah you did) or received it
as a gift, we’re so excited for you. It’s a beautiful way
to create ritual throughout your day and to discover
which scents you love most. This manual is meant to
help you learn the basics about your diffuser and to
inspire you to diffuse aromas that are as dynamic as
you are.
Usage / Page 04
Features / Page 07
Maintenance / Page 08
Troubleshooting / Page 10
TABLE OF CONTENTS
3

USAGE
WHAT’S IN THE BOX
Throughout this manual, we
refer to the diffuser parts by the
names you see below. If you ever
need clarification, just reference
this diagram.
c. Plastic lid
b. Spout
a. Stone cover
d. Water reservoir
e. On/off button and
power indicator
f. On/off button for
LED light
4

SETTING UP YOUR DIFFUSER
Step 1
Take off the stone cover and then
take off the inner plastic lid.
Step 2
Fill up the water reservoir to the
fill line and add 20-25 drops of
100% pure essential oils.
Step 3
Place the inner plastic lid back
on the reservoir and then slide
the stone cover over top by
aligning the hole in the top of
the cover with the spout.
Step 4
Plug in your diffuser and choose
your time setting by clicking the
large on/off button at the base.
One click turns on a continuous
3-hour setting (green light),
while two clicks turns on an
intermittent 7.5-hour setting
(orange light).
Step 5
The smaller on/off button at the
base will turn on the LED light, if
you’re looking to set the mood.
g. Power port
5

USAGE
HOW MANY DROPS?TIMED SETTINGS
For a room of approximately 500
square-feet, we suggest diffusing
20-25 drops of essential oils.
You can always add more or
less, depending on your scent
preferences and how strong
you’d like the aroma to be.
3-hour setting:
Click the power button at the base
once. You’ll see a green light—
this means your diffuser will run
continuously for 3 hours.
7.5-hour setting:
Click the power button at the
base twice. You’ll see an orange
light—this means your diffuser will
run for 30 seconds, then pause for
30 seconds, over a length of 7.5
hours.
6

FEATURES
BPA-free Plastic
The water reservoir and inner
plastic lid inside our diffuser is
made from high-grade, BPA-free
plastic.
Safety-off Switch
No need to worry about whether
you left your diffuser on—it will
automatically turn off once it has
run through its timed setting or is
out of water.
Voltage
Our diffuser has a voltage of 110-
240 volts and is compatible with
North American outlets.
Ultrasonic Technology
Our diffuser runs through
vibrations (2.5 million vibrations
per second) instead of emitting
heat. This means the plastic, water,
and oils are never heated while
diffusing, and that the plastic never
interacts with the essential oils.
LED Light
Our diffuser comes with an
optional light that gives off a warm,
candle-like glow. You can turn it
on or off by pressing the smaller
button on the base of the diffuser.
Ceramic Stone Cover
Our diffuser features a matte
stone cover that is made out of the
highest-quality ceramic.
7

MAINTENANCE
Cleaning your diffuser is really simple, but also
very important. To keep your diffuser looking and
working like new, we recommend cleaning it every
2 weeks or 7-10 uses.
CLEANING THE STONE COVER
Step 1
Remove the stone cover from the base and run the
whole piece under warm water.
Step 2
Apply a pea-sized amount of dish soap to the cover
and use your fingers to buff out any marks or dirt.
Note: do not use fabric or other materials because
the stone’s surface can pick up fibers.
Step 3
Rinse the diffuser and set it aside to air dry.
8

Step 1
Unplug your diffuser and remove
the stone cover.
Step 2
Take off the inner plastic lid
from the water reservoir. Using
a damp cloth, wipe the inside
of the water reservoir. Step 4 Turn the diffuser on and allow
the vinegar to run through the
diffuser for about 30 minutes.
Step 3
Plug in the diffuser and fill up
the water reservoir halfway. Add 1
tablespoon of white vinegar to the
water reservoir and put the plastic
lid and stone cover back on.
CLEANING THE WATER RESERVOIR
9

If you’re having an issue with your diffuser, try these
quick fixes first.
If there is no mist coming out of your diffuser:
Make sure the water is not higher than the water
line shown on the water reservoir. If this doesn’t
solve the problem, try emptying the water reservoir
and gently wiping it out with a paper towel. Rinse
out the inner plastic lid as well, and follow the
instructions for cleaning the inside of your diffuser.
If there is still no mist coming out, don’t hesitate to
reach out to us.
If your diffuser is spilling water:
Don’t panic! The first thing you should do is turn
off your diffuser. Make sure that the inner plastic
lid and the stone cover are properly in place. If the
diffuser continues to leak or spill water, get in touch
with us and we’ll happily help.
If there is a little bit of water left in your reservoir
after a diffusing cycle:
No need to worry, this is totally normal. You’re
welcome to simply top it up and start running your
diffuser again.
TROUBLESHOOTING
10

WARRANTY
At vitruvi we believe that
everything should have 3
components: functionality,
durability, and beauty. That’s why
we offer a 1-year warranty on all
our diffusers. If anything goes
wrong with your diffuser within
your first year, please reach out to
us and we’ll be happy to replace it.
REPLACEMENT PARTS
We know life happens—if you
need a replacement part for your
diffuser, you can order it off our
website. You can also reach out to
us and we’ll help you get what you
need to have your diffuser working
properly again.
Stone Covers - $25
Cords - $10
BPA Free Plastic Lid - $5
Power:
Power Consumption:
Frequency:
Materials:
Dimensions:
Weight:
Input: AC 100-240V 50/60Hz 0.5A
Output: DC 12V 1A
10 W, 100 hrs operation is 1 kw/h
Ultrasonic Vibration 2.5 MHz
Stone Cover: Ceramic
Base: ABS Plastic
Water Reservoir: Polypropylene
O-Ring: Silicon
Lens: Polycarbonate
3.4 x 3.4 x 7 in | 86 x 86 x 179 mm
1.1 lb | .52 kg
SPECS
11