viveroo Free User manual

Installation guide
MountingSet Inwall, free
!
viveroo GmbH
Wewelsburger Straße 4
33154 Salzkotten
Germany
www.viveroo.com
REV20211221
free

Safety information
Installation guide viveroo free, MountingSet Inwall and furniture, page of212
! Important
Please read the assembly instructions included carefully before
installing the MountingSet. Please also read the free user manual
completely before using your free. Please follow the instructions and
recommendations to ensure proper use and maximum enjoyment.
Safety
information
free and all free mounting sets are intended for use in enclosed and
dry living spaces.
The following conditions must be provided:
-Operating temperature between 0° C (32° F) and 35° C (95° F).
-Relative humidity (during use): 20!% to 90!%, non-condensing.
-No external environmental influences such as oil, chemicals, salt,
extensive dust, etc.
Installation, service or repairs, if necessary, may only be performed
by authorized persons.
The maximum altitude is 2.000m.
The installer is responsible for selecting the proper mounting
location and safe installation of free. This also applies to installation
in movable parts, such as doors. The installer is responsible for
performing and documenting all necessary safety tests.
All electrical installation work may only be conducted by authorized,
trained electricians, always adhering to the general rules and
regulations applying to electrical installation.
Should it become apparent that safe operation of free is not assured,
then free must immediately be taken out of service and secured
against potential misuse. If the free functions are limited, blocked or
disabled, if an unusual odor is present, if noises such as scratching
are audible or damage is visible, safe operation can no longer be
guaranteed.
!

Technical Data
Installation guide viveroo free, MountingSet Inwall and furniture, page of312
Measurements
in millimeter
Measurements design cover
free for …
… iPad mini
… iPad 9.7 inch, Air (before 2020)
iPad Air 2, iPad Pro 9.7 inch
… iPad 10.2 inch, Pro 10.5 inch
… iPad Pro 11 inch, Air (from 2020)
… iPad Pro 12.9 inch (from 2018)
223 x 134
267 x 164
277 x 173
275 x 178
332 x 214
Depth free
16
Size of opening
(for flush-mounted box)
elongated hole 68x139
Installation depth
(for flush-mounted box)
75
Weight in gram
free for …
… iPad mini
… iPad 9.7 inch, Air (before 2020)
iPad Air 2, iPad Pro 9.7 inch
… iPad 10.2 inch, Pro 10.5 inch
… iPad Pro 11 inch, Air (from 2020)
… iPad Pro 12.9 inch (from 2018)
876
924
952
993
1.110
Electrical
connections
Power supply
Power consumption
100-240 Vac
50-60 Hz
12,5Watt - 18Watt,
depending on iPad and
power supply
Removal from
power supply
free may be removed from the power supply via the circuit breaker in
the respective rooms.
Technical changes and mistakes are excepted.
Apple, iPad and Lightning are registered trademarks of Apple Inc.
Product
contents
-Installation guide Inwall
-free flush-mount box with installation disc, incl. integrated level
- Power supply unit (IN: 100-240 Vac, 50/60 Hz, OUT: 5,2 Vdc) or
USB Power Adapter USB-C: 100-240Vac, 50/60Hz, PD 3.0,
up to 18W
Compatability
Electrical operation of free is permitted only in connection with
free MountingSet and power supply and cable included in the
MountingSet. Operation of free without a MountingSet will lead to
immediate loss of guarantee and warranty.

Installation flush-mount box
Installation guide viveroo free, MountingSet Inwall and furniture, page of412
Step 1
free can be installed either in portrait or landscape
position, it is your choice.
For installation in landscape position:
Make an elongated hole in the wall (68mmx139mm). Use
a holesaw (two holes next to each other with 68mm
diameter, center distance 71mm).
For installation in portrait position:
Use a holesaw and make two holes among each other
with 68mm diameter, center distance 71mm.
The backside of the flush-mount box can be used as a
template. The depth should be approximately 75mm.
! Important: This installation guide shows the installation
process for a drywall. Here free is installed in landscape
position.
Step 2
Cut a hole for the cable in the flush-mount box. Use the
diagonal surfaces of the box for the cut. (See photo.) Cut
the hole from the back side of the box. Make the hole
correspond to the size needed for the cable.
If needed please prepare a second hole for the network
LAN cable, please see
Step 3
Insert the flush-mount box with the pre-installed
installation disc into the opening in the wall. Pull
10-15 cm of the power cable through the opening.
For free in landscape position:
The integrated level will show you the 12 o’clock “UP"
position. Adjust the flush mount box according to the
level. (Final adjustments can be made at a later time.)
For free in portrait position:
The integrated level is in 3 o’clock position. Use an
external level to align the box vertically.
Step 4
For drywall installation:
Fasten the flush-mount box to the wall.
For stone or solid wall installation:
Let the black installation disc mounted so that the flush
mounted box is not deformed in any way.
! IMPORTANT: During installation, pay attention that the
flush mount box is fastened parallel to the surface and is
not shifted or offset in the wall.
! IMPORTANT: It is important that the flush mounted box
is not deformed in any way. Do not use any foaming
installation materials that may put pressure on the box
and deform it.
LAN/Ethernet extension module
Supplementary set for cable bound connection to home
network. Please note that this set is a factory installed
hardware.

Installation flush-mount box
Installation guide viveroo free, MountingSet Inwall and furniture, page of512
Step 5
Remove the installation disc by loosening the screws.
Step 6
Now connect the connecting terminal with the current-
carrying conductors (L, N) and the protective conductor.
! Important: Make sure that the power supply cord is
unplugged during the entire installation and cannot be
turned on accidentally.
Note: Illustration is an example. Depending on the iPad
and USB port, another power adapter can be supplied.
Step 7
Re-insert the installation disc with the three screws
! Important: Make sure that no cables are jammed
between the flush mounting box and the installation disc."
After completing installation, please make sure that the
free is solidly secured to the wall.
Now you can install free. Please see the corresponding
user manual.

Product dimensions
See document „Technical Data“.
Installation guide viveroo free, MountingSet Inwall and furniture, page of612

Technical drawing
Installation guide viveroo free, MountingSet Inwall and furniture, page of712
side view
from left to right: Flush mount
box, wall, mounting plate, free
back view
! Attention: Measurements show free for iPad mini 4.
Measurements for other generation on previous page.
The size of free varies depending on the iPad
generation. Mounting plate is always the same, it
allows you to change iPad generation easily.

Installation guide
MountingSet Furniture, free
Installation guide viveroo free, MountingSet Inwall and furniture, page of812
free
viveroo GmbH
Wewelsburger Straße 4
33154 Salzkotten
Germany
www.viveroo.com

Safety information
Installation guide viveroo free, MountingSet Inwall and furniture, page of912
! Warning
Please read the assembly instructions included carefully. Please read
this free user manual completely before using your free. Please follow
the instructions and recommendations to ensure proper use and
maximum enjoyment.
Safety
information
free and all free mounting sets are intended for use in enclosed and dry
living spaces.
The following conditions must be provided:
-Ambient temperature: Usage: between 0° C (32° F) and 35° C (95° F),
storage: between -10° C (14° F) and 50° C (122° F).
-Relative humidity (during use): 20!% to 90!%, non-condensing.
-No external environmental influences such as oil, chemicals, salt,
extensive dust, etc.
Installation, service or repairs, if necessary, may only be performed by
authorized persons.
The installer is responsible for selecting the proper mounting location
and safe installation of free. This also applies to installation in movable
parts, such as doors. The installer is responsible for performing and
documenting all necessary safety tests.
All electrical installation work may only be conducted by authorized,
trained electricians, always adhering to the general rules and
regulations applying to electrical installation.
Should it become apparent that safe operation of free is not assured,
then free must immediately be taken out of service and secured
against potential misuse. If the free functions are limited, blocked or
disabled, if an unusual odor is present, if noises such as scratching are
audible or damage is visible, safe operation can no longer be
guaranteed.
!

Technical Data
Installation guide viveroo free, MountingSet Inwall and furniture, page of10 12
Measurements
in millimeter
Measurements design cover
free for …
… iPad mini
… iPad 9.7 inch, Air (before 2020)
iPad Air 2, iPad Pro 9.7 inch
… iPad 10.2 inch, Pro 10.5 inch
… iPad Pro 11 inch, Air (from 2020)
… iPad Pro 12.9 inch (from 2018)
223 x 134
267 x 164
277 x 173
275 x 178
307 x 215
Depth free
16
Size of opening
(for furniture installation)
Round hole, 50mm to put
the connector through.
Installation depth
(for furniture)
30
Weight in gram
free for …
… iPad mini
… iPad 9.7 inch, Air (before 2020)
iPad Air 2, iPad Pro 9.7 inch
… iPad 10.2 inch, Pro 10.5 inch
… iPad Pro 11 inch, Air (from 2020)
… iPad Pro 12.9 inch (from 2018)
876
924
952
993
1.110
Electrical
connections
Input voltage
Output voltage
200-240 Vac, 50/60 Hz via
Europlug
5Vdc, 9Vdc or 12Vdc
depending on iPad and USB
connector
Removal from
power supply
free may be removed from the power supply via the circuit breaker in
the respective rooms.
Technical changes and mistakes are excepted.
Apple, iPad and Lightning are registered trademarks of Apple Inc.
Product
contents
-Installation guide Furniture
-USB Power Adapter
(For USB-A: 100-240Vac, 50/60Hz, 12,5W, For USB-C: 100-240Vac,
50/60Hz, PD 3.0, up to 18W)
Compatability
Electrical operation of free is permitted only in connection with free
MountingSet and power supply and cable included in the
MountingSet. Operation of free without a MountingSet will lead to
immediate loss of guarantee and warranty.

Technical drawing
Installation guide viveroo free, MountingSet Inwall and furniture, page of11 12
side view
from left to right: Wall,
mounting plate, free.
Please note: Use holesaw
∅50mm to put the connector
through.
back view
! Attention: Measurements show free
for iPad mini 4. Measurements for
other generations on the following
page.
The size of free varies depending on
the iPad generation. Mounting plate is
always the same, it allows you to
change iPad generation easily.

MountingSet PoE / MontageSet PoE
Place the PoE adapter built into the bracket in the mounting box of the PoE mounting set. A PoE switch or an
injector with the 802.3at standard is also required for the power supply.
The assembly set PoE is installed according to steps 1 to 4 on page 4 of these instructions.
Installation guide viveroo free, MountingSet Inwall and furniture, page of12 12