Vivitar DVR 426HDv2 User manual

DVR 426HDv2
Digital Camcorder
with camera
User Manual
© 2009-2012 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

1
Contents
Introduction .................................................................................................................................. 2
What’s Included............................................................................................................................ 2
Parts of the Camcorder ................................................................................................................ 3
Initial Camcorder Setup................................................................................................................ 4
Main Camcorder Modes............................................................................................................... 7
Camcorder Technical Specifications............................................................................................. 8
Computer System Requirements –Windows............................................................................... 9
Computer System Requirements –Macintosh............................................................................. 9
Powering ON/OFF Your Digital Video Recorder......................................................................... 10
Changing Camcorder Mode ........................................................................................................11
Navigating the Menus................................................................................................................. 12
Video Capture Mode .................................................................................................................. 13
Video Playback Mode................................................................................................................. 17
Photo Capture Mode.................................................................................................................. 21
Photo Playback Mode ................................................................................................................ 25
Installing the Software................................................................................................................ 29
Connecting the Camcorder to the Computer.............................................................................. 30
Getting Photos and Videos from your Camcorder to Your Computer......................................... 31
Get started!................................................................................................................................. 32
Transferring Images from my Camcorder to my Computer Manually......................................... 33
Camcorder Maintenance............................................................................................................ 34
Sakar Warranty Card.................................................................................................................. 35
Technical Support....................................................................................................................... 36
Troubleshooting.......................................................................................................................... 36

2
Introduction
Thank you for purchasing this digital video recorder. Everything you need to take quality digital
photos and videos is included with your digital video recorder.
Vivitar makes capturing those special moments as easy as possible.
Note: Your camcorder needs an SD Memory card (up to 16GB) for normal use.
SD Memory cards are not included and need to be purchased separately.
Please read this manual carefully first in order to get the most out of your digital video recorder.
What’s Included
1. Digital Video Recorder
(with Built-in USB Connector,
not shown)
2. AV Cable
3. Vivitar Experience Image Manager
software Installation CD
4. Wrist Strap
Note: SD memory card and batteries not included.

3
Parts of the Camcorder
1. AV Out Port
12. Left / Resolution Button
2. Wrist Strap Connector
13. Shutter / OK Button
3. Tripod Mount
14. LCD Screen
4. USB Connector
15. Up / Zoom In Button
5. USB Lever
16. SD Memory Card Slot
6. LED Indicator Light
17. Power Button
7. Microphone
18. Delete Button
8. Lends
19. Right/ViviLink Button
9. Speaker
20. Down / Zoom Out Button
10. MODE Button
21. Battery Compartment
11. MENU Button

4
Initial Camcorder Setup
Installing the Batteries
Installing the Memory Card
Turning On the Camcorder
Using the Camcorder
Make sure the camcorder is
powered OFF.
Insert SD Memory card
(up to 16GB) before use.
Insert 3 X AAA (1.5V) batteries.
Alkaline batteries recommended
(not included).

5
When powering the camcorder ON for the first time the camcorder will take you through the
initial setup.
Powering the Digital Video Recorder ON
1) Batteries
Make sure the batteries have been inserted properly into your digital video recorder.
Slide the battery cover on the back of the camera in a downward direction to open the cover.
Insert 3 x AAA (1.5V) batteries (not included) with the correct polarity, according to the
polarity illustrated inside the battery compartment.
Note:
Alkaline batteries are recommended.
Remove the batteries from the camera when not in use for an extended period.
Do not mix alkaline and non-alkaline batteries.
Some camera features (such as Flash in some models) will not work if the battery power
level is low.
When the battery power is low the battery icon turns red and the camcorder will
automatically turn off a few seconds later.
The energy status of the power is displayed on LCD as shown below:
Full battery power Medium battery power Low battery power
2) SD Memory Card
Make sure the camcorder is powered OFF before inserting your SD/MMC/SDHC Memory
Card.
Make sure an SD card (up to16GB) has been inserted into your digital video recorder.
(SD Memory card not included.)
To properly insert the SD Card:
Push the SD card into the slot in the direction shown on the camcorder (see SD icon by the
SD card slot). Push the SD card until you hear a slight clicking sound. This indicates the SD
card has been inserted correctly.
Note:
After the camcorder is powered on, an SD icon will appear on the LCD display. If you do
not see the SD icon on the display, please check if the card was inserted properly.

6
Make sure the SD card is not locked (checkthe lock switch on the side of the SD card). If the
SD card is locked this will prevent the camcorder from saving captured photos to the SD
card.
3) Power On
Press and hold the POWER button to turn on the camcorder.
Setting the Camcorder Language
You will first be prompted to select a language for the camcorder. The Language selection menu
will appear. Select the language of your choice and press the Shutter/OK button to confirm the
selection.
Your digital video recorder is now ready to begin capturing videos and photos.

7
Main Camcorder Modes
Your digital video recorder has different modes for the various camcorder functions.
You can switch modes by pressing the MODE button on your digital video recorder after the
camcorder has been powered ON.
Video Capture Mode
Use this mode to capture videos with your digital video recorder.
This is the default mode when the camcorder is powered ON.
To take a video, aim your camcorder as desired and press the Shutter button to start the
record. A red record indicator will appear on the LCD screen while record is in progress. To
stop the record, press the Shutter button again. The video will be automatically saved to
your camcorder’s memory card.
To access the various menus for the Video Capture mode, press the MENU button while in
the Video Capture mode.
Photo Capture Mode
Use this mode to capture pictures with your camcorder.
After turning on your camcorder, press the MODE button once to open the Photo Capture
mode.
To take a picture, aim your camcorder as desired and press the Shutter button.
The picture will be automatically saved to your camcorder’s memory card.
To access the various menus for the Photo Capture mode, press the MENU button while in
the Photo Capture mode.
Playback Mode (Photos & Videos)
Use this mode to view and manage the photos and videos on your camcorder.
After turning on your camcorder, press the MODE button twice to open the Playback mode
for photos and videos. You can scroll through the photos and videos that you’ve previously
taken to view and delete them as desired.
To access the various menus for the Playback mode for photos and videos, press the
MENU button while in the Playback mode.

8
Camcorder Technical Specifications
Image Sensor
CMOS Sensor
Image Resolution
2048x1536 (3M), 1280x1024 pixels (1.3 MP)
Video Resolution
1280 x 720 (HD), 640X480pixels (VGA 30fps)
File Format
JPEG/AVI
External Memory
SD/MMC/SDHC(up to 16GB) –SD Card Memory Card not
included
LCD Display
1.77 Inch TFT
Lens
f=3.0mm F2.8
Zoom
4X Digital Zoom
Image Quality
Normal
White Balance
Auto
Color Effect
Standard
Light Exposure
Auto
ISO
Auto
Frequency
60 Hz
Auto Power Off
3 minutes
Metering
Center
Language
English, French
Microphone
Yes
Speaker
Yes
Interface
USB 2.0 (HS)
System Requirements
Window XP SP3 / Vista SP1/ Windows 7
Mac OS X v10.5.x or higher
Battery
3 x AAA (1.5V) Alkaline batteries
Working Temperature
0~40 C

9
Computer System Requirements –Windows
To be able to download photos and videos to your PC, you will need the following minimum
configuration:
Microsoft® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7
Pentium® 4 processor (or above)
1 GB of RAM, with 250 MB of free hard disk space
16-bit Color monitor, 1024 X 768 recommended screen resolution
CD-ROM Drive
QuickTime® 6 or higher
Microsoft® Internet Explorer 7 or higher
Windows Media Player 10 or higher
DirectX 9 or higher
Internet connection required
Computer System Requirements –Macintosh
To be able to download photos and videos to your Macintosh, you will need the following
minimum configuration:
Intel processor running Mac OS X v10.5.x or later
1 GB RAM, 250 MB free hard disk space
Display: 1024 x 768 or higher-resolution monitor
CD-ROM Drive
QuickTime® 6 or higher
Internet connection required

10
Powering ON/OFF Your Digital Video Recorder
Make sure the batteries have been inserted properly into your digital video recorder.
If your camcorder comes with a rechargeable lithium battery, make sure it is fully charged
before the first use.
Make sure an SD card has been inserted into your camcorder.
(SD card up to 16GB - SD Card not included)
Powering the camcorder ON
Press the Power button to turn your camcorder ON.
The camcorder will be in Video Capture mode to start.
Powering the camcorder OFF
While the camcorder is on, you can press the Power button again at any point to turn your
camcorder OFF. You will see a “Goodbye” splash screen and then the camcorder will power off
completely.
Note: When there is insufficient battery power, a “Low Battery”message will appear on the LCD
screen. The digital video recorder will automatically power off a few moments later.
Auto Power Saving
Your digital video recorder has an Auto Power Off feature that will automatically turn off the
camcorder if it has not been in use after 3 minutes.

11
Changing Camcorder Mode
Your digital video recorder has three main modes:
1) Video Capture Mode - Use this mode to capture videos with your camcorder.
2) Photo Capture Mode - Use this mode to capture photos with your camcorder.
3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos
you have already taken with your camcorder.
When the camcorder is first powered ON, the Video Capture Mode will be active. The icons that
appear on the LCD screen are the best default settings so that you can begin to capture and
enjoy clear quality videos and photos.
To change the active camcorder mode, make sure the camcorder is powered ON and press the
MODE button.
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display.
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD
display.
When in Playback Mode, this icon will display on the top-left corner of the LCD display

12
Navigating the Menus
Each camcorder mode has a set of menus specific to that mode.
1) Press the MENU button to open the menus for the current mode.
1) Press the LEFT or RIGHT direction control button to scroll between the various menus for
the current mode.
2) Press the UP or DOWN direction control button to highlight the desired menu selection.
3) Press the Shutter/OK button to confirm and select the highlighted menu option.
4) If the selection can be remembered by the camcorder, a selection icon will appear to the
right of the selected menu option. Changes made to these options will remain as is until you
decide to change them again at a later time.
5) Some menu options are single-use functions that are not remembered by the camcorder
and do not display this icon when selected.
6) At any time you can press the MODE button to exit the menus and return to the previous
screen.

13
Video Capture Mode
The Video Capture Mode allows you to capture videos with your digital video recorder. When the
camcorder is first powered ON, the Video Capture Mode will display by default.
Taking a Video
1) While in Video Capture Mode use the LCD display to direct the camcorder at the scene you
would like to capture.
2) Press the UP-T/Zoom In and Down –W/Zoom Out buttons to better set the camcorder
display if desired.
3) Press the Shutter button to start the video capture.
4) The elapsed time will begin to appear on the top right corner of the LCD screen and a red
indicator will appear in place of the video icon on the LCD screen.
5) To stop the video record, press the Shutter button again.
6) The video will automatically be saved to the camcorder’s SD card.
7) You can also capture your videos using the iTwist Flip Screen.
When you would like to quickly and easily include yourself in the video, simply flip the LCD
display out and hold the camera facing towards you. Make sure you can see yourself within
the scene on the LCD screen, look at the lens, then click the Shutter button to begin
recording.
It’s as easy as twist and shoot!
Note: The amount of recording time available for the resolution selected appears on the top
center of LCD screen. The lower the resolution setting the more recording time is available.
However, videos recorded at lower resolution are of less quality than videos recorded at the
higher resolution.
Remember, the amount of time that you can capture videos also depends on the size of the SD
memory card inserted as well as the video resolution selected.

14
Video Capture Mode Quick Function Buttons
Your digital video recorder has a four-directional pad and additional buttons that functions as
Quick Function buttons.
Button
Function
LEFT
Video Resolution –Changes between HD, VGA, QVGA Video Resolution
UP (T)
Zooms in
RIGHT
ViviLink for Videos –Opens the ViviLink Menu options for Videos
(see below for details)
DOWN (W)
Zooms out
Other
Shutter/OK
- Starts and stops your video capture
- Confirms menu selection
MENU
Opens the Video Menu options
Note: To navigate through the Menus, use the Left, Right, Up, and Down
directions control buttons.
MODE
Toggles between the Video Capture Mode, Photo Capture Mode, and
Playback Mode
Exits the Video Menu options

15
ViviLink for Videos Menu
ViviLink Quick Function Button (Right Button):
The ViviLink technology allows you to quickly and easily upload your camcorder’s photos and
videos to the social networks of your choice with the accompanying Vivitar Experience Image
Manager application.
1) Press the RIGHT button while in Video Capture Mode.
This is the Quick Function Button to access the ViviLink for Videos Menu.
2) The ViviLink for Videos Menu appears with the following options:
YouTube, Photobucket, Flickr, None
3) Press the UP or DOWN direction control button to scroll through the menu options.
4) Press the OK button to select and confirm the desired option.
A selected option icon will appear on the selected item.
NOTE: The selected ViviLink option remains the default option for all captured images. This
can be changed at any time by choosing another option from the ViviLink menu.
5) Once you have selected a ViviLink, press the MODE button to return to the Video Capture Mode.
6) The icon of the selected ViviLink destination appears on the LCD screen.
NOTE: The icon of the selected ViviLink destination also appears in Video Playback mode
on each captured image. If you have selected ‘None’as your ViviLink, no icon appears.
Remember that the ViviLink feature is deactivated by default. A ViviLink destination will only
be assigned to a photo or video if you manually set it from this menu or from the ViviLink
menu in Capture mode (accessible with the ViviLink Quick-Function button in Capture
mode).
Changing the ViviLink destination site will also make the selected site the new default
ViviLink option. A new default can be selected at any time through this menu.

16
Video Capture Mode Menus
The following are the menus that appear in your camcorder’s Video Capture Mode:
Image Resolution Menu
The Image Resolution menu allows you to choose the desired size of the images taken by your
camcorder. Keep in mind that images with a larger size will also take up more of your
camcorder’s memory.
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control button to scroll and select the Image Resolution
menu.
3) Press the UP or DOWN direction control button to scroll through the menu options.
4) Press the Shutter/OK button to select the desired option.
5) A selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the MODE button to exit the menu and return to your previous mode.
8) An icon reflecting your selection will display on the LCD screen.
9) Remember that this setting will be saved by your camcorder until you manually change the
setting.
Language Menu
You can select your camcorder’s language setting by selecting the desired language from the
Language menu.
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control button to scroll and select the Language menu.
3) Press the UP or DOWN direction control button to scroll through the menu options.
4) Press the Shutter/OK button to select the desired option.

17
5) A selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the MODE button to exit the menu and return to your previous mode.
8) Remember that this setting will be saved by your camcorder until you manually change the
setting.
Video Playback Mode
The Playback mode allows you to review photos and videos that you’ve already taken with your
digital video recorder.
When you first turn on the camcorder, the camcorder will be in Video Capture mode by
default.
Press the MODE button twice to open the Playback Mode.
The Playback screen appears with the Playback icon appearing on the top left corner of
the screen.
Playing Videos on Your Digital Video Recorder
1) Select your Video:
Once in Playback mode, press the LEFT or RIGHT direction button to scroll through the
images on your digital video recorder’s memory card until you find the video you would
like to view.
Each captured image (both videos and photos) is displayed on the LCD screen.
Videos appear with an ‘AVI’icon on the top left of the LCD screen.
2) Play your selected Video:
Press the Shutter button to START playing the video.
- While the Video is playing all the icons on the top section of the LCD disappear.
- The video playing time is shown on the bottom right.
Press the Shutter button again to STOP the video.

18
Press the UP button to increase the volume during video playback.
Press the DOWN button to decrease the volume during video playback.
Video Playback Mode Quick Function Buttons
Your digital video recorder has a four-directional pad and additional buttons that functions as Quick
Function buttons.
Button
Function
LEFT
- Displays the PREVIOUS image
- Scrolls through your Thumbnail images
UP (T)
- Scrolls through your Thumbnail images
- Increases the volume during video playback
RIGHT
- Displays the NEXT image
- Scrolls through your Thumbnail images
DOWN (W)
- Opens the Thumbnail display
- Scrolls through your Thumbnail images
- Decreases the volume during video playback
Other
Shutter/OK
- Plays the selected video file
- Stops the selected playing video
- Confirms menu selection
- Opens selected image from the Thumbnail display
DELETE
Opens the Delete menu options
Note: To navigate through the Menus, use the Left, Right, Up, Right, and
Down directions control buttons.
MODE
Toggles between the Video Capture Mode, Photo Capture Mode, and
Playback Mode
Exits the Video Playback menu

19
Thumbnail View
Easily navigate and select the image you wish to view by using the Thumbnail View.
The images on your camcorder will be displayed in a 3 X 3 matrix where you can use the
direction buttons to scroll and select images from the thumbnails.
1) Press the DOWN (W) button for the images to appear in Thumbnail View.
2) Use the UP/DOWN/LEFT/RIGHT direction control buttons to navigate the thumbnails and
select the image you wish to view.
Videos appear with a ‘V’ icon.
3) Press the Shutter/OK button for the selected image to appear in full screen.
Note: You can identify from the thumbnail the image type:
AVI files have a Vappear on the thumbnail image
JPEG files do not have any icons on the thumbnail image
Video Playback Mode Menu
The following is the menu that appears in your digital video recorder’s Video Playback Mode:
Delete Menu
While in the Playback mode, you can delete videos from your camcorder through the Delete
menu or by pressing the DELETE button.
Delete This Video:
1) Select the image you wish to delete.
1) Press the MENU or DELETE button to open the ‘Delete’ menu.
2) Press the UP or DOWN direction control button to highlight the ‘Delete this Video’ option,
and then press the Shutter/OK button confirm and continue.
3) A ‘Delete This Video’ confirmation menu appears.
- Select ‘No’ then press the Shutter/OK button to exit without deleting the selected video.