Vivitar Freelance VS17G User manual

VS17G / VS18B Freelance
Digital Camera
User‟s Manual
© 2009 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

1
Table of Contents
Introduction.............................................................................................................................2
Key Features..........................................................................................................................2
What your digital camera includes..........................................................................................3
Computer System Requirements for Windows XP.................................................................3
Computer System Requirements for Windows Vista..............................................................4
Computer System Requirements for Macintosh.....................................................................4
A Quick Look at your Digital Camera......................................................................................5
Inserting Batteries ..................................................................................................................6
Camera Modes.......................................................................................................................6
Capturing Photos..................................................................................................................13
Capturing Video....................................................................................................................17
Install the Image Zone Software and camera driver.............................................................18
Connect your camera to the computer .................................................................................18
Get photos and videos from your camera to your computer.................................................19
Get started!...........................................................................................................................20
Using Your Camera as a Webcam.......................................................................................20
Sakar Warranty Card............................................................................................................22
Technical Specifications.......................................................................................................24
Frequently Asked Questions ................................................................................................24

2
Introduction
Thank you for purchasing the VS17G, VS18B Freelance Vivitar Digital Camera. Everything you need
to take quality digital photos and videos is included with your device. Please read this manual
carefully FIRST in order to get the most out of your digital camera.
Important Notice:
Please do not plug the camera into the USB port of your computer until you have installed the
Image Zone software and the cameras driver.
Plugging in your camera at this stage will cause the device to not be recognized by the
computer.
Key Features
1.3 Mega-Pixel Dual Mode Digital and Video Camera 1280 x 1024
1.4 Inch Color LCD monitor
Image Zone software to get photos and videos from your camera, manage and organize your images by
creating albums, edit images using automatic and manual tools and more...
Works as a Webcam on Windows and Macintosh computers

3
What your digital camera includes
Digital Camera
Image Zone software Installation CD
USB cable
Neck strap
Warranty card
Quick Start Guide
Computer System Requirements for Windows XP
To be able to download photos and videos to your PC, you will need the following minimum configuration:
Pentium 4 processor or above with Windows XP service pack 2
512 MB RAM, with 100MB of free disk space
1024 x 768 Recommended screen resolution
16-bit color or higher display adaptor
CD-ROM Drive
QuickTime 6 or higher
Microsoft Internet Explorer 7 or higher
Windows Media Player 10 or higher
Internet connection required

4
Computer System Requirements for Windows Vista
To be able to download photos and videos to your PC your will need the following minimum configuration:
Windows Vista
800MHz processor and 512 MB of system memory
20GB hard drive with at least 15GB of available space
Support for Super VGA graphics
Available USB Interface
CD-ROM drive
QuickTime 6 or higher
Microsoft Internet Explorer 7 or higher
Internet connection required
Computer System Requirements for Macintosh
Macintosh with Intel processor running Mac OS X v10.4.6 or later
256 MB RAM, 100 MB free disk space
Display: 1024 x 768 or higher-resolution monitor
QuickTime 6 or higher
Internet connection required

5
A Quick Look at your Digital Camera

6
Inserting Batteries
Open the camera‟s battery compartment cover on the bottom of the camera and insert 2 new AAA alkaline
batteries according to the polarity shown.
Close the cover and press the Power/Menu button to power on the camera.
After powered on, if you want to make changes to the camera‟s default settings, please read the instructions of
this manual.
Warning: Do not remove the batteries before downloading the photos and videos from the camera.
Doing so will erase everything in the camera`s memory.
Note: We recommend to download and save your photos and videos often so as not to lose them if the
battery power becomes too low.
Camera Modes
Note: In order to download the photos and videos captured with this camera you need to install the
Image Zone and camera specific driver for this device.
1. Press the Power/Menu button to power on the camera.
2. Press the Power/Menu button again to view the Main Menu screen.
3. Use the Up button to toggle between the menu icons on the screen.
4. Use the Shutter button to select the different submenu features within each icon.
5. Press the Power /Menu button to save your choice.

7
Below is an explanation for each of the Submenus on the Main Menu.
Camera Submenu
Take Photo
Self-Timer
AVI（Video）
Continuous Capture

8
1. Press the Power/Menu button to enter the Main Menu. By default the camera icon is automatically
selected.
2. Press the Shutter button to toggle through the following various options within the camera submenu.
3. Press the Power/Menu button to select and save the mode of your choice. The LCD screen will show your
choice with a symbol in the upper left corner.
Resolution Modification Submenu
1. Press the Power/Menu button to enter the Main Menu.

9
2. Press the Up button until the Resolution Modification icon is selected and then press the Shutter button to
toggle between the different resolution options.
3. Press the Power/Menu button again to select and save the desired resolution. Options within the
Resolution Modification Submenu are as follows:
SXGA (1280x1024)
Note: At higher resolutions the pictures captured will be clearer but will take up more of the camera`s memory. You
will therefore be able to take less photos at higher resolution than at lower resolution.
An indication of the number of photos that can still be captured for each resolution appears on the bottom left of the
LCD screen once the picture is taken.
Compression Rate Submenu
1. Press the Power/Menu button to enter the Main Menu.
2. Press the Up button until the Compression Rate icon is selected.
VGA (640x480)
QVGA (320x240)

10
3. Press the Shutter button to toggle between the different compression rate options.
4. Press the Power/Menu button again to select and save the desired compression.
Options within the Compression Rate Submenu are as follows:
Frequency (Anti-Flicker) Submenu
1. Press the Power/Menu button to enter the Main Menu.
2. Press the Up button until the Frequency icon is selected.
3. Press the Shutter button to toggle between the frequency options
4. Press the Power/Menu button to select and save the desired frequency. Options within the Frequency
Submenu are as follows:
Non-Compression Mode
Compression Mode

11
Note: 60Hz is suitable for the U.S. and Asia, and 50Hz for Europe and Japan. Select the correct frequency for the
present conditions you find yourself.
Delete All Submenu
1. Press the Power/Menu button to enter the Main Menu.
2. Press the Up button until the Delete All icon is selected.
3. Press the Shutter button to select this submenu.
Upon entering this submenu, you will be shown the following screen, asking if you wish to Delete All of the
photos in the camera.
4. Press the Up button to move between options, select Yes to Delete All, or No to Cancel.
5. Press the Shutter button to confirm your choice.
Note: Please use this feature only after you have downloaded all the images to your computer. Once deleted
the images are lost forever and cannot be retrieved.
50Hz
60Hz

12
Battery Capacity Icons
An icon will appear on the top right corner of your LCD screen, showing the amount of battery power available.
Once the battery indicator falls below 35% it is advisable to download the images to your computer as quickly as possible
so as not to lose them.
Once the batteries run low and the camera turns off, the images will be erased from the camera`s memory.
Removing the batteries and replacing them with new ones also erases the images from the camera`s memory.
more
than
70%
power
35%-
70%
power
5%-
35%
power
less
than
5%
power

13
Capturing Photos
TAKING INDIVIDUAL PHOTOS
You can compose your shot using the LCD screen. Hold the camera steady and press the shutter button. A beep
will sound and the red LED indicator on the front of the camera will light up, indicating that the photo has been taken.
Do not move the camera until you hear the beep. Moving the camera while taking the picture will cause the photo to
blur.
After each photo is taken the number of photos left to shoot at this resolution is displayed at the bottom
left of the LCD screen.
If the level of brightness is too low, two quick beeps will sound, indicating that the photo cannot be taken.
If there is not enough battery power, two quick beeps will sound, indicating that the photo cannot be taken.
If the camera‟s memory is full, two quick beeps will sound, indicating that photos cannot be taken. In order
to continue taking photos you will need to download the photos on the camera to the computer and then
delete them from the camera.

14
CONTINUOUS SHOT
Your camera can be set up to take 3 photos in one continuous shot.
Select the Continuous shot mode from the camera menu options on the LCD screen.
1. Press the Power/Menu button.
2. Toggle between the camera modes by pressing the Shutter button until the continuous shot icon appears
in the top left corner.
3. Press the Power/Menu button to save your choice. The camera will show the continuous shot icon in the
top left corner - you can now take your shots.
4. Press the Shutter button once and the camera will take 3 consecutive shots saved in jpeg format. The red
LED indicator on the front of the camera will light up three times and you will hear three beeps.
TIMER
Your camera can be set up with the timer mode to take a photo after 10 seconds.
Select the Timer shot mode from the camera menu options on the LCD screen.

15
1. Press the Power/Menu button. Toggle between the camera modes by pressing the Shutter button until the
Timer icon appears in the top left corner.
2. Press the Power/Menu button to save your choice. When the Timer icon appears in the top left corner you
can now prepare your shot.
3. Press the Shutter button once and the timer will be activated to take the photo after 10 seconds. The red
LED indicator on the front of the camera will light up and a beep will sound every second.
PLAYBACK MODE
1. Press the Power/Menu button.
2. Press the Playback (Down) button on your camera in order to view all the photos that are presently on
your camera.
3. Press the Up button to navigate between the photos.
You may also delete single photos in the Playback mode.
Select the present photo you wish to delete.
1. Press the Power/Menu button.
2. A Delete single photo icon will appear on the LCD screen with 2 options.
3. Press the Up button to move between the options, “Yes”to Delete the present photo, or “No”to Cancel.
4. Press the Shutter button to confirm your choice.
The photo is deleted from your camera‟s memory.
Note: If you delete photos from your camera before downloading them to your computer the photo is completely
erased from your camera‟s memory and will be lost with no recovery.

16
SLEEP MODE
(Automatic Power-Saving)
The digital device will go into Sleep Mode automatically after approximately 30 seconds of inactivity. This mode
uses low energy consumption in order to prolong the device‟s battery life. To reactivate the device, simply press
the Power/Menu button.
(Manual Power-Saving)
Press and hold the Power/Menu button for 3 seconds. After hearing two consecutive beeps the camera will go
into a sleep mode manually.
In sleep mode, energy consumption is very low and the battery life is prolonged. Your camera can remain in sleep
mode to save power. To use your camera again just simply press the Power/Menu button.
For information on how to work with your photos and videos, please see the Software section in the Help and
Tour of your application.

17
Capturing Video
In order to capture Videos with this Camera the camera has to be set to the Video mode. Select the Video mode
from the camera menu options on the LCD screen.
1. Press the Power/Menu button. Toggle between the camera modes by pressing the Shutter button until the
video icon appears in the top left corner.
2. Press the Power/Menu button to save your choice. When the video icon appears in the top left corner you
can now prepare your shot.
Once in the Video mode, press the shutter button for the camera to start capturing an AVI video.
A clock counter on the bottom right corner of the LCD screen will begin to count. The video is now being captured.
To end the video capture, press the Shutter button again.
The Video has now been captured and is ready to be downloaded from the camera to your computer.
Warning: In AVI mode, the camera checks the brightness before capturing the video. If the light conditions changes
and becomes darker after the capture has begun, the resulting AVI file when played back on your computer will play
back very fast.

18
Install the Image Zone Software and camera driver
Warning: Do not plug your camera into the computer until the Image Zone software installation
is complete.
1. Insert the installation CD into your CD-ROM drive. The Image Zone will begin to install.
2. Please review the license terms.
On PC: Click the “I Agree” button to continue.
On Macintosh: Click the “I accept the terms of this license agreement” and then click “Next” to continue.
3. On PC only: Let the “Image Zone” installer create the folder to where the program will be installed, and
then click “Install”.
4. Please wait while the application continues the installation process on your computer. Follow all
instructions.
5. On PC: Click the “Close” button when the installation is complete.
The application automatically opens.
On Macintosh: Click the “Quit” button when the installation is complete.
6. If you closed the application, click on the Image Zone from your computer to open and run the application.
Connect your camera to the computer
1. Use the USB cable that came with your camera to connect your camera to your computer.
2. Your camera will automatically turn on.

19
3. The first time you connect the device to the computer you will have to wait a few moments until the
computer recognizes the device.
Get photos and videos from your camera to your computer
Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your
computer.
1. Select the “Get Images” button from the Main menu.