Vivitar VS27G, VS28B User manual

VS27G / VS28B
Digital Camera
User‟s Manual
© 2009 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

1
Table of Contents
Introduction................................................................................................................................ 2
Key Features............................................................................................................................. 2
What your digital camera includes............................................................................................. 2
Computer System Requirements for Windows XP..................................................................... 3
Computer System Requirements for Windows Vista.................................................................. 3
Computer System Requirements for Macintosh......................................................................... 4
A Quick Look at your Digital Camera......................................................................................... 4
Inserting Batteries...................................................................................................................... 5
Camera Modes.......................................................................................................................... 6
Install the Vivitar Experience Image Manager Software –TARGET Edition ............................. 15
Connect your camera to the computer..................................................................................... 16
Get photos and videos from your camera to your computer..................................................... 17
Get started!.............................................................................................................................. 18
Using Your Camera as a Webcam........................................................................................... 19
Sakar Warranty Card............................................................................................................... 21
Technical Support.................................................................................................................... 22
Technical Specifications .......................................................................................................... 22
Frequently Asked Questions.................................................................................................... 23

2
Introduction
Thank you for purchasing the VS27G, VS28B Vivitar Digital Camera. Everything you need
to take quality digital photos and videos is included with your device. Please read this
manual carefully FIRST in order to get the most out of your digital camera.
Important Notice:
Please do not plug the camera into the USB port of your computer until you have
installed the Vivitar Experience Image Manager –TARGET Edition software and the
camera`s driver.
Plugging in your camera at this stage will cause the device to not be recognized by
the computer and no images will be downloaded.
Key Features
1.4 Inch Color LCD monitor
Vivitar Experience Image Manager –TARGET Edition software for uploading and managing
photos and videos to or from the most popular photo sharing and social network websites.
Order Prints online using the Target Online Photo Partners –Shutterfly, Kodak Gallery and
Photobucket
What your digital camera includes
Digital Camera
Vivitar Experience Image Manager –TARGET Edition software and driver Installation CD
USB cable
Strap
Warranty card
Quick Start Guide

3
Computer System Requirements for Windows XP
To be able to download photos and videos to your PC, you will need the following minimum
configuration:
Pentium 4 processor or above with Windows XP service pack 2
512 MB RAM, with 100MB of free disk space
1024 x 768 Recommended screen resolution
16-bit color or higher display adaptor
CD-ROM Drive
QuickTime 6 or higher
Microsoft Internet Explorer 7 or higher
Windows Media Player 10 or higher
Computer System Requirements for Windows Vista
To be able to download photos and videos to your PC your will need the following minimum
configuration:
Windows Vista
800MHz processor and 512 MB of system memory
20GB hard drive with at least 15GB of available space
Support for Super VGA graphics
Available USB Interface
CD-ROM drive
QuickTime 6 or higher
Microsoft Internet Explorer 7 or higher

4
Computer System Requirements for Macintosh
Macintosh with Intel processor running Mac OS X v10.4.6 or later
256 MB RAM, 100 MB free disk space
Display: 1024 x 768 or higher-resolution monitor
QuickTime 6 or higher
A Quick Look at your Digital Camera

5
Inserting Batteries
Your camera requires three (3) AAA alkaline batteries, which must be inserted as follows:
1. Open the battery compartment on the side of the camera.
2. Insert the batteries in accordance with the polarity (+/-) shown on the inside of
the compartment.
3. Close the battery compartment.
Battery Capacity Icons
An icon will appear on the top right corner of your LCD screen, showing the amount of battery power
available.
Once the battery indicator falls below 35% it is advisable to download the images to your
computer as quickly as possible so as not to lose them.
Once the batteries run low and the camera turns off, the images will be erased from the
camera`s memory.
Removing the batteries and replacing them with new ones also erases the images from the
camera`s memory.
more than
70% power
35%-70%
power
5%-35%
power
less than
5% power

6
When the battery is running low, a “low battery”message will appear on the LCD Display and then
automatically switch off. In this case you will need to replace the camera‟s batteries before continuing
to take photos.
Warning:
Please download any photos you have on the camera before opening the battery
compartment
Do not remove the batteries before downloading the photos and videos from the
camera. Doing so will erase everything in the camera`s memory.
Note: We recommend downloading and saving your photos and videos often so as not to
lose them if the battery power becomes too low.
Camera Modes
Note: In order to download the photos and videos captured with this camera you need to
install the Vivitar Experience Image Manager –TARGET Edition and camera specific driver
for this device. See the “Install the Vivitar Experience Image Manager –TARGET Edition
Software”section of this manual to learn how to install the software before connecting the
camera to your computer.
Press the Power/Menu button to power on the camera.
Once powered on, if you want to make changes to the camera‟s default settings, please read the
instructions of this manual.

7
By default the Photo mode is ready to take photos on powering on the camera.
To select another mode:
1. Press the Power/Menu button again for the Main Menu screen to appear.
2. Use the Up/Down button to toggle between the menu icons on the screen.
3. Use the Shutter button to toggle and select the different submenu features within each
menu.
4. Press the Power/Menu button to save your choice.
The camera modes on the Main Menu are:
First icon options (top left):
Photo, Self-Timer, Video and Continuous 3 shot
Second icon (top middle): Resolution Settings
Third icon (top right): Compression Settings
Fourth icon (bottom left): Frequency Settings
Fifth icon (bottom middle): Delete
Taking Photos
1. In the Photo mode the camera icon appears in the top left corner of the Preview Screen.

8
2. Compose your shot using the viewfinder. (The optimal distance between the camera and the
subject is approximately 5 feet.)
3. Hold the camera steady and press the Shutter button to take a photo.
4. After each photo is taken the number of photos left to shoot at the selected resolution is
displayed at the bottom left of the Preview Screen.
5. This camera also has a Flash feature. To activate and select the Flash setting that you wish,
press the Up button to toggle between the Auto, Force On and Force Off options.
6. The camera will beep when a photo is taken.
If the camera beeps twice continuously and “Memory is Full” appears on the Preview Screen it
means no further photos can be taken until the existing photos are downloaded and cleared
from the camera`s memory.
Note: After a photo is taken the Preview Screen will display for a short time the
number of photos that can still be taken.
Self-Timer
1. Press the Menu button once to enter the menu.
2. Press the Shutter button until the icon appears in the top left icon area of Preview
Screen display.
3. Press the Menu button again to save the choice and exit the menu.

9
4. The Self-Timer icon now appears in the top left corner of the Preview Screen.
5. The camera is now ready to take a photo after a 10-second count down.
6. Press the Shutter button to start the countdown. The camera will emit a beep for
every second. After 10 seconds the photo will be taken automatically.
Taking Videos
1. Press the Menu button once to enter the menu.
2. Press the Shutter button until the icon appears in the top left icon area of Preview
Screen display.
3. Press the Menu button again to save the choice and exit the menu.
4. The Video icon now appears in the top left corner of the Preview Screen.
5. Press the Shutter button to start shooting the video and again to stop the video
capture. The video is saved as an AVI file in the camera`s memory.
6. During video capture the recording elapsed time will be appear on the bottom right
corner of the Preview Screen.
Taking 3 Continuous Shots
1. Press the Menu button once to enter the menu.