Vivitar 91372, 91373 User manual

91372 / 91373 Digital Camera
User Manual
© 2010 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

1
Table of Contents
Introduction..............................................................................................................................2
Key Features ...........................................................................................................................2
What‟s Included .......................................................................................................................2
Computer System Requirements.............................................................................................3
A Quick Look at your Digital Camera.......................................................................................4
Installing the Batteries .............................................................................................................4
Starting Your Camera..............................................................................................................5
Taking Photos..........................................................................................................................6
The Camera Modes.................................................................................................................7
Installing the Vivitar Experience Image Manager Software and Camera Driver ....................11
Connecting your Camera to the Computer ............................................................................11
Getting Photos and Videos from your Camera to your Computer..........................................12
Getting Started!......................................................................................................................13
Using Your Camera as a Webcam ........................................................................................13
Maintenance of Your Digital Camera.....................................................................................14
Sakar Warranty Card.............................................................................................................15
Technical Support..................................................................................................................15
Technical Specifications........................................................................................................16
Frequently Asked Questions..................................................................................................16

2
Introduction
Thank you for purchasing this camera. Everything you need to take quality digital photos and
videos is included with your camera
Please read this manual carefully first in order to get the most out of your digital camera.
Important Notice:
Please do not plug the camera into the USB port of your computer until you have installed the
Vivitar Experience Image Manager software and the camera‟s driver.
Plugging in your camera at this stage will cause the device to not be recognized by the computer
and no images will be downloaded.
Key Features
3-in-1 Digial Camera
Takes over 100 photos
Vivitar Experience Image Manager software for uploading and managing photos and
videos to or from the most popular photo sharing and social network websites.
Works as a Webcam on Windows and Macintosh computers
What’s Included
1. Digital Camera
2. USB cable
3. Wrist Strap
4. Vivitar Experience Image Manager
software Installation CD
5. Quick Start Guide (not shown)
Note: Batteries not included.

3
Computer System Requirements
To be able to download photos and videos to your PC or Macintosh, you will need the following
minimum configuration:
WINDOWS OS
WINDOWS XP Service Pack 2, Vista and 7
Pentium® 4 processor (or above)
150 MB available hard disk space
512 MB of RAM
16-bit Color display, 1024 X 768 pixels
QuickTime® 6 or higher
Microsoft® Internet Explorer 7 or higher
Windows Media Player 10 or higher
MAC OS
Intel processor
150 MB available hard disk space
At least 256 MB of RAM
Mac OS X v10.5 or later
QuickTime® 6 or higher

4
A Quick Look at your Digital Camera
1. Shutter Button
6. LCD Display
2. View Finder
7. LED Light
3. Lens
8. Mode Button
4. Battery Compartment
9. Wrist Strap Connector
5. USB Port
10.Tripod Socket
Installing the Batteries
Your camera requires 2 AAA batteries (not
included). Alkaline batteries recommended.
Insert the batteries into the camera as shown:
1. Open the battery compartment.
2. Insert the batteries in accordance with the
polarity (+/-) shown on the inside of the
battery cover.
3. Close the battery compartment.

5
The LCD will flash if your batteries are running low in which case you will need to replace them
before taking photos. When the battery voltage drops below 2.2V, the LCD will display and
then automatically switch off.
Note: If you do not intend to use your camera for an extended period, remove the batteries to
avoid leakage and corrosion.
WARNING:
Please download any photos you have on the camera before opening the battery
compartment.
Opening the battery compartment and/or removing the batteries will erase the photos
currently stored in the camera.
Photos may be lost when batteries run low.
We recommend downloading and saving your photos and videos often so as not to lose
your captured images if the battery power becomes too low.
.
Starting Your Camera
1. Make sure camera lens is visible by sliding the lens cover to the left.
2. Press the MODE button to start the camera.
3. The camera emits a beep to confirm that your camera is ready for use.
4. The red LED next to the View Finder will light up to confirm that your camera is on and
ready for use.
5. The LCD display indicates the number of photos that can be taken.
Energy Saving Feature:
To conserve battery power, if the camera is not in use for 30 seconds, it automatically switches
off.
Note: In order to download the photos and videos captured with this camera you need to install
the Vivitar Experience Image Manager software and camera specific driver for your camera. See
the “Installing the Vivitar Experience Image Manager Software and Camera Driver” section of this
manual to learn how to install the software before connecting the camera to your computer.

6
Taking Photos
1. Compose your shot using the view finder.
The optimal distance between the camera and the subject is approximately 5 feet.
2. Hold the camera steady and press the Shutter button to take the photo.
3. The camera will beep when a photo is taken.
4. The photo is save as a JPEG file in the camera‟s memory
5. The LCD screen will display the number of photos that can be still taken.
Note: If there are more than 99 photos left to take, the hundreds digit will appear on the LCD for
a split second when you take the photo. Thereafter the last two digits will appear.
How to Proceed when your Camera Memory is Full:
If the camera beeps twice continuously or if a "00" appears on the LCD, this is an indication that
the memory is full. When the camera memory is full no further photos can be taken until the
existing photos have been downloaded and cleared from the camera memory.
In order to continue taking photos you will need to:
1. Download all the photos and videos from your camera to your computer.
2. After the photos have been downloaded and appear on your computer you should delete
all the photos from your camera.
3. Once your camera memory is empty you are now ready to take more photos and videos.

7
The Camera Modes
Power Off -
1. Press the MODE button for the icon to appear on the LCD screen.
2. Press the Shutter button and the camera will switch off.
Self-Timer -
1. Press the MODE button for the icon to appear on the LCD screen.
2. Press the Shutter button.
3. A 10 second count down will start (the camera will beep once a second).
4. After 10 seconds a photo will be taken.
Continuous Shot Mode - (Video)
1. Press the MODE button for the icon to appear on the LCD screen.
2. Hold the Shutter button down for the camera to continuously shoot the video.
3. The camera will beep and the countdown digits will appear all the while the video is being
taken.
4. Lift your finger off the Shutter button to stop shooting the video.
5. The video will be saved as an AVI file.
Note: Photos taken in Continuous Shot Mode may fail under poor lighting conditions.
3 Shot Mode -
1. Press the MODE button for the icon to appear on the LCD screen.
2. Press the Shutter button once - 3 continuous jpeg shots are taken.
Note: The 3 photos taken in this mode will be downloaded individually.

8
Delete All -
To delete all photos on the camera:
1. Press the MODE button for the icon to appear on the LCD screen.
2. Press the Shutter button and the photo counter will flash.
3. Press the Shutter button again within 5 seconds and all photos in the camera will be
deleted.
4. The LCD counter will be reset to show the maximum number of photos that can be taken
at the current resolution and compression.
Delete (Last Photo) -
To delete the last photo taken:
1. Press the MODE button for the icon to appear on the LCD screen.
2. Press the Shutter button within 5 seconds and the last photo will be deleted.
3. The LCD counter will display the updated number of photos that can be taken at the
current resolution and compression.
Photo Resolution /
There are 2 photo resolutions to select from:
High Resolution –or Low Resolution –.
1. Press the MODE button for the or icons to appear on the LCD screen.
2. If the LCD displays this means the present resolution is and in order to change to
, click the Shutter button.
3. If the LCD displays this means the present resolution is and in order to change to
, click the Shutter button.
4. All photos taken after changing the resolution setting will be taken at the new resolution.
5. The resolution setting can be changed at anytime.
Note: Photos taken at higher resolution take up more of the camera‟s memory and therefore less
photos can be taken at high resolution than that with low resolution.

9
Compression /
There are 2 photo compressions to select from:
High compression - or Low compression -
1. Press the MODE button for the or icons to appear on the LCD screen
2. If the LCD displays this means the present compression is Low and in order to
change to High compression , click the Shutter button.
3. If the LCD displays Low compression this means the present compression is High
and in order to change to Low compression , click the Shutter button.
4. All photos taken after changing compression will be at the new compression.
5. The compression setting can be changed at anytime.
Note: Photos taken at lower compression take up more of the camera‟s memory and therefore
less photos can be taken at lower compression than with high compression.
The photo resolution and compression settings determine the number of photos that can be
taken and the amount of memory required for each photo.
The following table tells you how many photos can be taken based on the image resolution and
compression:
Resolution
Compression
VGA (640 x 480)
26 photos
VGA (640 x 480)
52 photos
QVGA (320 x 240)
104 photos
QVGA (320 x 240)
208 photos –approx.