Vivitek QUMI User manual

ii
Preface
Copyright
©2013 Vivitek Corporation. is a trademark of Vivitek Corporation. Other
trademarks are the properties of their respective owners. Values, weights and dimensions
are approximate. Specications are subject to change without prior notice.
Disclaimer
The information in this document is subject to change without notice. The manufacturer
makes no representations or warranties with respect to the contents hereof and
specically disclaims any implied warranties of merchantability or tness for any particular
purpose. The manufacturer reserves the right to revise this publication and to make
changes from time to time in the content hereof without obligation of the manufacturer to
notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand
Corporation with issued registrations and pending applications in
other countries throughout the world.
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
MHL, the MHL logo, and Mobile High-Denition Link are trademarks
or registered trademarks of MHL licensing, LLC.
All other product names used in this manual are the properties of their respective owners
and are acknowledged.

iii
Important Safety Information
Important:
It is strongly recommended that you read this section carefully before using the Qumi.
These safety and usage instructions that will make sure you enjoy many years of safe use
of the Qumi. Keep this manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous
situations.
The following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or
cause personal injury.
Throughout this manual, component parts and items in the OSD (On-Screen Display)
menus are denoted in bold font as in this example:
“Press the Menu button on the remote control to open the Main menu.”
General Safety Information
• Do not open the unit case. There are no user-serviceable parts in the unit. For
servicing, contact qualied service personnel.
• Follow all warnings and cautions in this manual and on the unit case.
• The projection light source is extremely bright by design. To avoid damage to eyes,
do not look into the lens when the LED illumination is on.
• Do not place the unit on an unstable surface or stand.
• Avoid using the system near water, in direct sunlight, or near a heating device.
• Do not place heavy objects such as books or bags on the unit.

iv
Qumi Installation Notice
• Allow at least a 50cm clearance around the exhaust vent.
Minimum 100mm
Minimum 500mm
• Make sure that the intake vents do not recycle hot air from the exhaust vent.
• When operating the Qumi in an enclosed space, make sure that the surrounding air
temperature within the enclosure does not exceed operating temperature while the
Qumi is running, and the air intake and exhaust vents are unobstructed.
• All enclosures should pass a certied thermal evaluation to make sure that the Qumi
does not recycle exhaust air, as this may cause the device to shutdown even if the
enclosure temperature is with the acceptable operating temperature range.
Caution:
Avoid using the Qumi in dusty environments.

v
Power Safety
• Only use the supplied power cord.
• Do not place anything on the cord. Place the cord where it will not be in the way of
foot trafc.
• Remove the battery from the remote control when storing or not in use for a
prolonged period.
Cleaning the Qumi
• Unplug the cord before cleaning. See Cleaning the Qumi on page 45.
Note:
The Qumi will be warm after usage. Allow Qumi to cool down before storing in a
compartment.
Regulatory Warnings
Before installing and using the Qumi, read the regulatory notices in the Regulatory
Compliance on page 57.
Symbol Explanations
DISPOSAL: Do not use household or municipal waste collection services for
disposal of electrical and electronic equipment. EU countries require the use
of separate recycling collection services.
Main Features
• Lightweight unit, easy to pack away and transport.
• Compatible with all major video standards including NTSC, PAL, and SECAM.
• A high brightness rating allows for presentations in daylight or in lit rooms.
• Supports data resolution up to UXGA at 16.7 million colors to deliver crisp, clear
images.
• Flexible setup allows for front, rear, ceiling and rear ceiling projections.
• Line-of-vision projections remain square, with advanced keystone correction for
angled projections.
• Input source automatically detected.
About this manual
This manual is intended for end users and describes how to install and operate the Qumi.
Wherever possible, relevant information—such as an illustration and its description—has
been kept on one page. This printer-friendly format is both for your convenience and to
help save paper, thereby protecting the environment. It is suggested that you only print
sections that are relevant to your needs.

vi
Table of Contents
Preface .................................................................................................................. ii
Chapter 1 At a Glance ................................................................ 1
Overview................................................................................................................ 1
Accessories ........................................................................................................... 3
Remote Control...................................................................................................... 4
Qumi and Remote Control Buttons........................................................................ 4
Media Player Screen ............................................................................................. 5
Chapter 2 Getting Started.......................................................... 6
What You Need...................................................................................................... 6
Setting Up Qumi .................................................................................................... 7
Setting Up the Remote Control............................................................................ 13
Chapter 3 Qumi Media Suite.................................................... 14
Overview.............................................................................................................. 14
Music ................................................................................................................... 15
Movies ................................................................................................................. 17
Photos.................................................................................................................. 18
Ofce Viewer........................................................................................................ 19
Wi....................................................................................................................... 20
Web browser........................................................................................................ 23
Wi Display .......................................................................................................... 24
Settings................................................................................................................ 25
Chapter 4 On-Screen Display (OSD) Settings........................ 27
OSD Menu Controls............................................................................................. 27
Setting the OSD Language.................................................................................. 28
OSD Menu Overview ........................................................................................... 29
Image Menu......................................................................................................... 30
Settings 1 Menu................................................................................................... 34
Settings 2 Menu................................................................................................... 39
Chapter 5 Taking Care of Your Qumi ...................................... 45
Cleaning the Qumi ............................................................................................... 45
Cleaning the Lens................................................................................................ 45
Troubleshooting ................................................................................................... 46
Vivitek Support Site.............................................................................................. 50
Specications....................................................................................................... 51
Projection Distance vs. Projection Size ............................................................... 52
Projection Distance and Size Table ..................................................................... 52
Timing Mode Table............................................................................................... 53
2Dà3D Timing Table ........................................................................................... 54
3D Timing Table ................................................................................................... 55
Qumi Dimensions ................................................................................................ 56
Regulatory Compliance ....................................................................................... 57
Safety Certications............................................................................................. 57
Disposal and Recycling ....................................................................................... 57

1
Chapter 1 At a Glance
Overview
Front/Top/Right View
Keypad
Keypad
See Keypad - On-Screen Display
(OSD) buttons
Cooling Vent
Do not cover
Lens
Projection Lens
Zoom / Focus ring
Zoom / Focus the projected
image
Cooling Vent
Do not cover
Right Cursor
Navigate and change settings in the
OSD
Enter Cursor
Change settings in the OSD
Left Cursor
Navigate and change settings
in the OSD
Up Cursor
Navigate and change settings
in the OSD
Menu
Open and exit the OSD
Power Switch
Turn on/off the Qumi
Down Cursor
Navigate and change settings
in the OSD
Return
Return the previous OSD
menu

2
Rear/Top/Left View
Bottom View
AC In
Connect the supplied power
cord
Audio Out
Connect an audio cable to
speakers or headphones
Audio in (L&R)
Connect the Audio in (L&R)
cable from an audio device
Video
Connect the video cable from
a video device
VGA
Connect the VGA cable from
a VGA device
IR Receiver
Receive IR signal from the
remote control
HDMI 2
Connect a HDMI cable from a
HDMI device
HDMI 1/ MHL
Connect a HDMI / MHL cable
from a HDMI / MHL device
USB
Connect an USB Flash Disc
Rubber Foot Pad
Stability and maintain cooling
ventilation
Tilt adjuster
Rotate adjuster lever to adjust angle
position
Cooling Vent
Do not cover
Tripod Connecting Slot
Tripod not included

3
Accessories
Along with the Qumi, the following accessories are included:
Remote Control
(With one 3V CR2025 battery)
Standard HDMI Cable
VGA Cable
MHL cable
Regional Power Cord
WARRANTY
Documentation Kit
(User Manual, Quick Start Guide, Warranty
Card)
Carrying Case
Lens Cap
WiFi Dongle (Optional)
Contact your dealer immediately if any items are missing, appear damaged, or if the unit
does not work. It is recommended that you keep the original packing material should you
ever need to return the equipment for warranty service.
Note:
Accessories will vary from model to model.

4
Remote Control
Important:
1. Be sure nothing obstructs the path between the remote control and the Qumi. If the path
between the remote control and the Qumi is obstructed, the signal can bounce off certain
reective surfaces.
2. The buttons and keys on the Qumi have the same layout and similar functions as the
corresponding buttons on the remote control. This user’s manual describes the functions
based on the remote control.
Qumi and Remote Control Buttons
The Qumi can be operated using the remote control or the keypad on the top of the
Qumi. All operations can be carried out with the remote control; however, the keypad
on the Qumi carries out the same operations as the remote control by pressing a
combination of keys.
The remote control is not only used to navigate the cursor in the menus, but can also be
used to control the media functions (music and video playback). For more details about
how to control the media functions with the remote control, please refer to 14.
Mouse
Mouse left key when using the Web
browser.
Up Cursor
Navigate and change settings in the OSD.
Cursor navigation when using web
browser.
Enter
Change settings in the OSD.
Enter function when using web browser.
Exit
Close the OSD.
Exit function when using web browser.
Right Cursor
Navigate and change settings in the OSD.
Cursor navigation when using web
browser.
Down Cursor
Navigate and change settings in the OSD.
Cursor navigation when using web
browser.
Source
Change the input source.
Volume Up/Down
Change the volume.
Left Cursor
Navigate and change settings in the OSD.
Cursor navigation when using web
browser.
Menu
Open and exit the OSD.
Page Up/Down
Page up and down when using the Web
browser.
Mute
Mute the built-in speaker.
ON/OFF
Turn on or off Qumi.

5
Media Player Screen
The media player screen is the main interface for the Qumi Q7 Series. If a USB Flash Disc
is plugged in when powering on the Qumi, the media player screen appears. In the media
player screen, you can choose the type of media to display by selecting:
• Music – A music player that supports many types of audio les, ready to play music.
• Movie – An easy to use movie player that displays multiple movie formats.
• Photo – A photo viewer that contains slide show functionality.
• Ofce viewer – A document viewer that displays documents.
• Wi Display – Use this to congure the connection to a wireless access point.
• Web browser – A Web browser for surng the Internet.
• Wi – Use this to choose a Wi-Fi access point.
• Settings – The settings of the Qumi can be adjusted in this menu.
Note:
Wi & Web browser functions are only available with Q7’s dongle.

6
Chapter 2 Getting Started
What You Need
Many types of external devices and peripherals can be connected to the Qumi. External or
portable music players can be connected to play music. DVD, VCD and VHS players can
be connected to play movies. Camcorders and digital cameras can also be used to play
videos and display photos. Computers can be connected, as well as peripherals such as
USB Flash Disc to display documents and other types of media.
These devices can be connected to the Qumi by using an appropriate cable. Make sure
that the connecting device has an appropriate output connector.
USB
HDMI 1 / MHL HDMI 2
VGA
VIDEO
AUDIO OUT
L - AUDIO - R
K
Warning:
As a safety precaution, disconnect all power to the Qumi and connecting devices before
making connections.
Connect AC power cord
Connect HDMI / MHL peripherals
Connect HDMI peripherals
Insert USB Flash Disc Connect to an audio device
Connect video device
Connect VGA device
Connect AUDIO IN device

7
Setting Up Qumi
Connecting to an HDMI Device
Connect your Qumi to an HDMI device by using an HDMI cable.
USB
HDMI 1 / MHL HDMI 2
VGA
VIDEO
AUDIO OUT
L - AUDIO - R
K
Game
Console Personal Computer
SmartphoneCamera
Connecting to an MHL Device
Connect your Qumi to a MHL-compatible device by using an MHL cable.
USB
HDMI 1 / MHL HDMI 2
VGA
VIDEO
AUDIO OUT
L - AUDIO - R
K
TouchpadSmartphone
Note:
For some MHL compatible devices, whose output is not thru micro-USB, an extra cable
adaptor may be required.
Connecting to a Personal Computer
Connect your Qumi to a personal computer by using a VGA cable.
USB
HDMI 1 / MHL HDMI 2
VGA
VIDEO
AUDIO OUT
L - AUDIO - R
K
Personal
Computer
Note:
The personal computer must have a VGA output port to use the VGA cable to connect to
the Qumi.

8
Inserting a USB Flash Disc
Connect a USB Flash Disc to the Qumi by inserting the storage device(s) into the
appropriate port.
USB
HDMI 1 / MHL HDMI 2
VGA
VIDEO
AUDIO OUT
L
-
AUDIO
-
R
K
Connecting Video
Connect audio/video devices to the Qumi by using the audio/video cable.
USB
HDMI 1 / MHL HDMI 2
VGA
VIDEO
AUDIO OUT
L - AUDIO - R
K
Game
Console DVD
Player
Connecting Audio
Connect earphones or mini speakers to the Qumi by inserting into the Audio Out port.
USB
HDMI 1 / MHL HDMI 2
VGA
VIDEO
AUDIO OUT
L
-
AUDIO
-
R
K
Earphone Mini Speaker

9
Starting and Shutting down the Qumi
1. Connect the AC power cord to
the Qumi. Connect the other end
of the AC power cord to a wall
outlet.
2. Press the POWER button to
turn on the Qumi.
The Qumi splash screen
displays and connected devices
are detected.
See Setting an Access
Password (Security Lock) on
page 11 if security lock is
enabled.
3. If more than one input device is
connected, press the SOURCE
button on the remote control
and use the ▲ or ▼ buttons to
select the applicable device or
press ▲ and ▼ or ◄ and ► at
the same time on the keypad on
the Qumi.
• VGA: Analog RGB,
Component: DVD
input YCbCr / YPbPr,
or HDTV input YPbPr
• Composite Video:
Traditional composite video
• HDMI 1 / MHL: HDMI / DVI /
MHL
• HDMI 2: HDMI / DVI
• USB: USB Flash Disc

10
4. Press the POWER button to
turn off the Qumi.
5. When the “Power Off? /Press
Power again” message appears,
press the POWER button.
The projector turns off.
Adjusting the Image
Use the Image-zoom control (on the
projector) to resize the projected image
and screen size (B). B
A
Use the Image-focus control (on the
projector) to sharpen the projected
image (A).

11
Setting an Access Password (Security Lock)
To prevent unauthorized use of the Qumi, you can create a password. When the access
password function is enabled, the password must be entered after the Qumi has been
turned on.
Creating a password can be done by performing the following steps:
1. Press the MENU button on the
remote control or press MENU
on the keypad to open the
On-Screen Display (OSD)
menu.
2. Move the cursor to the Settings
1 tab and scroll down to select
Advanced 1.
3. Press the ▲ or ▼ button to
select Security Lock and press
.
4. Press the ◄ or ► button to
enable or disable the security
lock function.
A password dialog box
automatically appears.
5. You can use the ▲▼◄►
buttons located either on top
of the Qumi or on the remote
control to enter the password.
Any combination of the
navigation buttons can be used
(ve must be chosen).
Press the navigation buttons in
any order to set the password.
Then press the MENU button to
exit the dialog box.

12
6. The password conrmation
menu appears when you
power on the Qumi when the
Security Lock is enabled.
Enter the password that was
created in step 5.
Important:
Keep the password in a safe place. Without the password, you will not be able to use
the Qumi. If you lose the password, contact your reseller for information on resetting the
password.
Using a Tripod
The Qumi can be used with a tripod by connecting
the tripod to the bottom of the Qumi. Many typical
tripods can be connected.
Supported Tripod Specications:
• Type: Mini tripod
• Slot size: 1/4-20 L6.3 mm
Adjusting Projector Level
Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the projector so that it is perpendicular to the screen.
• Ensure the cables are in a safe location. You could trip over them.
To adjust the angle of the picture, turn the tilt-adjuster right or left until the desired angle
has been achieved.

13
Setting Up the Remote Control
The remote control comes with one (1) 3V lithium
battery (CR2025). The battery is pre-installed in
the remote control.
To begin using the remote control, remove the
plastic tab (A) from the battery compartment.
A
Replacing the Remote Control Batteries
1. Remove the battery
compartment cover
by sliding the cover
towards the arrow
(A). Then pull out
the cover towards
the arrow (B).
2. Remove the old
battery and insert
the new battery
with the positive
side facing up.
3. Install the cover.
A
B
Caution:
1. Use only a 3V lithium battery (CR2025).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the battery when not using the Qumi for prolonged periods.
Operating Range
The remote control uses infrared (IR) transmission to control the Qumi. It is not necessary
to point the remote directly at the Qumi.
The remote control functions properly within a radius of approximately 7 meters (23 feet)
and 15 degrees above or below the Qumi level (if the remote is not held perpendicular to
the sides or rear of the Qumi).
If the Qumi is unresponsive to the remote control, move closer towards the Qumi.

14
Chapter 3 Qumi Media Suite
Overview
The Qumi Media Suite is designed to provide easy access to your les from an inserted
USB Flash Disc. Music, movies, pictures and documents can be displayed.
The media suite menu contains 8 applications that can be accessed:
• Music – A music player that supports many types of audio les, ready to play music.
• Movie – An easy to use movie player that displays multiple movie formats.
• Photo – A photo viewer that contains slide show functionality.
• Ofce viewer – A document viewer that displays documents.
• Wi Display – Use this to congure the connection to a wireless access point.
• Web browser – A Web browser for surng the Internet.
• Wi – Use this to choose a Wi-Fi access point.
• Settings – The settings of the Qumi can be adjusted in this menu.
Note:
1. Wi & Web browser functions are only available with Q7’s dongle.
2. Plug a USB hub into Qumi’s USB socket, then plug the Q7 Wi-Fi dongle, keyboard and
mouse into the USB hub to surf the Internet easily.