AAXA Technologies P3X Guide

Hard Reset for P3-X
The hard reset will allow you to fix you P3-X when it would crash or freeze up
1. You would first need to get a small pin or a paper clip and then you would insert it to
the reset button that is located on the right side of the projector and press on it. The
location of the reset button on the projector as shown below:
2. After you press the reset button it should fix your P3-X and you would turn the
projector back on

3. Now your P3-X is ready to be used again
4. If you have done these steps and there is still a problem with your P3-X, please
contact AAXA Technical Support either by email or by phone for further assistance.
Mirroring with iPod Touch 4th or 5th gen,
iPhone 4S/5/5C/5S, or iPad 2, 3, 4, Mini
Mirroring allows you to see the same content on display to another.
Apple products capable of mirroring are the iPod Touch 4th, 5th gen, iPhone 4S/5/5C/5S, or iPad
2, 3, 4, and iPad Mini only.
1. If you have a device that has the 30-pin dock connector, you will need this AV adapter
from the Apple store: 30-pin Digital AV Adapter - If you have a device that has
Lightning, you will need the Lightning Digital AV Adapter.

2. Using the supplied HDMI cable, connect the smaller end of the cable to the P3X, and
the larger end to your Apple Digital AV Adapter, as shown below:

3. Turn on your P3X and on the menu screen, select the option circled in red below:
4. Then select the HDMI option (circled in red below):

5. If you have everything connected and turned on, you should now be able to see
whatever you see on your iPod Touch 4th or 5th gen, iPhone 4S/5/5C/5S, or iPad 2, 3,
4, Mini on your AAXA Projector.
Mirroring with a Samsung Galaxy S3, S4,
Note II, or Note III
Mirroring allows you to see the same content on display to another.
In this case, the only devices we have verified to be functioning are the Samsung Galaxy S3, S4,
Note II, or Note III.
1. First, you will need a MHL Adapter. For your convenience, you can purchase it
directly from our store: MHL Adapter.

2. Put in the micro USB end of the MHL Cable into the bottom of your Samsung Galaxy
S3, S4, Note II, or Note III. As shown below:
3. Insert the full HDMI into the mini-HDMI adapter and plug into your P3X. Then
connect the USB to the full-size USB port on the P3X.

4. Turn on your P3X once everything is connected and on the menu screen select the
option circled in red below:
5. Then choose the HDMI option circled in red below:
6. Now you are ready to enjoy the full mirroring capabilities of P3X and your Samsung
Galaxy smartphone.
Convert Your Video Files to a Format
Supported by AAXA Projectors

These are some tips on how to play supported videos on AAXA Projectors
There are many types of codecs for AVI. So even though a file may say it is an AVI extension, it
may be using a codec that the projector doesn’t recognize.
Please try the following:
Please go to this link here to download Format Factory. We have had great success with this free
and lightweight conversion program. Use it to convert your video to AVI and that should do the
trick. Note: USB or SD card must also be under 32GB in size for the projector to read.
Projector
Native
Resolution
P1 Jr
380p
P3
1024 x 600
P4
1024 x 768
M1
800 x 600
M2
1024 x 768
L1V2
800 x 600
OEM-250
800 x 600
P2 Jr
380p

P300
1280 x 800
LED
Showtime
1280 x 800
P4-X
800 x 480
LED Pico
960 x 540
P3X
854x480
Connecting a computer to the P3X via HDMI
Only computers that support video output via HDMI will work with the P3X.
1. Using the supplied HDMI cable, connect the smaller end of the cable to the P3X, and
the larger end to your laptop or computer's HDMI port, as shown below:

2. Once connected, turn on the P3X and on the menu screen, select the option circled in
red below:
3. Then select the HDMI option (circled in red below):