VIVO HOME VH1032-SL User manual

Instruction Manual
Upgrade Automatic Ice Cube Maker
Machine with Visible Window
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Accessories
Installation
Ice storage basket Ice scoop
Before connecting the power cord, please put the machine upright for 24 hours to
allow the refrigerant to settle. Unpack all packaging materials : foam, bags, tape, etc.
The machine should be placed on a stable level to support the ice machine's weight
of water or ice.
This machine can be installed without any support and can be installed in any place
that meets the conditions of use and power supply.
Use this machine in a well-ventilated area with temperature between 50°F and 100°F.
Do not install the machine in a place with the following factors, such as wind, rain,
water mist or electromagnetic.
lnstall the machine away from the following factors, such as wind, rain, watermist or
the electromagnetic environment.
Do not place it next to high-temperature sources such as ovens and grills.
every other week to clean the outside of the machine and the dust deposits on the
bottom of the tank.
Model No (S):VH1032-SL / VH1032-RE
Thank you for choosing our ice maker
lf you have any questions or problems, please feel free to contact us for assistance.
1

Control Panel
Operation
A B C D
A — Ice Making B — Add Water Indicator C — Ice Full Indicator
1.
2.
3.
4.
5.
6.
7.
8.
Insert the appliance’s main plug into the main socket.
Open the front cover, take out the ice basket, and pour water into the water tank. Do
NOT exceed the MAX line.
Put back the ice basket. Make sure the water level is below the bottom of the ice
basket, and then close the front cover.
After plugging it in, the appliance will be in standby mode and the“ICE‐MAKING”
Quickly press the “ ” button once. The appliance will default to the big ice cube
mode and begin producing ice. The green“ICE‐MAKING”indicator light will stabilize.
During the ice-making cycle, press and hold the “ ” button for 3 seconds to
switch to the small ice cube mode. The “ICE‐MAKING” indicator light will turn yellow.
ice cubes. The appliance has a memory function. After turning it on, it will
automatically resume operating in the mode (big/small ice cubes) previously active
During the ice-making cycle, quickly press the “ ” button once. The appliance will
In standby mode, press and hold the“ ” button for 10 seconds. The appliance will
enter the self‐cleaning mode, and the indicators "ADD WATER", "ICE FULL", and
After 15 minutes, the appliance will switch to standby mode, and the “ICE-MAKING”
2

Ice Storage Capacity
Sound During Machine Operation
Tips:
When the ice box is full, the ice full indicator on the display panel wil light up (red), and
the machine will stop automatically. When the ice is removed, the machine will restart
working.
and the ice maker will stop working. Please refer to the trouble shooting page.
cord.
* When the ice basket is full, the machine will stop automatically and stand by.
* The ice maker can partially block heat and store ice temporarily, but cannot be used as
a freezer.
* Please remove ice cubes as needed and add water to ensure machine works normally.
The new ice maker may make unfamiliar sounds. Most sounds are normal, for example:
*Compressor emits beating or sharp sounds.
* Water splashes from the evaporator to the tank.
* The sound of air compressed by the condenser fan over the condenser.
3

Cleaning And Maintenance
Strange smell:
prolong the working life of the ice maker.
* Do not use solvent-based cleaning agents, which may damage the machine or cause
retention of harmful substances.
* Do not rinse the outside of the machine directly with water, but wipe with a wet cloth
instead.
* Dry the inside and outside of the machine with a soft and clean cloth.
time use or long time left idle:
* Disinfection solution: water and vinegar, or citric acid (ratio: 10:1).
* Wipe the interior with a neutral cleaning agent, including the hand-touchable
evaporator (icing column).
* Add ice-making water, run the ice maker and discard the ice cubes produced in the
reinstall the drain plug to ensure that the plug is in place.
* Re-use clean, soft cloth to clean the remaining watermarks. Finish cleaning.
* Disinfection solution: water and vinegar, or citric acid (ratio: 10:1).
* Wipe the interior with a neutral cleaning agent, including the hand-touchable
evaporator (icing column).
* Add ice-making water, run the ice maker and discard the ice cubes produced in the
reinstall the drain plug to ensure that the plug is in place.
* Re-use clean, soft cloth to clean the remaining watermarks. Finish cleaning.
lf the ice has a strange taste, or if the ice has a disgusting or mildew odor in the
machine, refer to the steps above to clean the inside of the machine.
4

5
Storage
This sign“ ”on the product or packaging indicates that the product cannot be
electronic and electrical products. Proper handling of this product can help prevent
possible environmental problems and harm to human body.If you need more details
services or the manufacturer or the point of purchase.
remaining water from the drainage outlet. Dry the interior with a clean soft cloth (refer
to maintenance and cleaning).
Safety Tips And Warnings
1. Do not plug and unplug the machine with wet hands.
2. Do not attempt to repair or replace any part of the ice machine unless under
manufacturer's guide, otherwise inspections should be performed under the direction
of a technician.
3. Use the machine in a well-ventilated area with a temperature between 50°F and 100°F.
4. Do not install or operate the machine in a sealed space, such as a closed room.
5. Do not install the machine in a place with the following factors, such as wind, rain,
water mist or electromagnetic.
6. Do not place it next to high-temperature sources such as ovens and grills.
7. The use of ice makers must comply with national and local standards.
8. Do not squeeze or twist the power cord of the ice machine.
10. Check if there is any water leakage after adding water to the ice machine.
11. Children or people with mental disorders are not allowed to operate the ice machine.
12. Although the machine has been tested and cleaned at the factory, due to long-term

Troubleshooting
13. If the machine has not been used for a long time, please clean it thoroughly before
use.Please follow the instructions provided to clean and disinfect. Do not leave any
solution after cleaning.
14. This machine is suitable for households or similar purposes such as family
intended use.
15. If the device is no longer operating, please contact the manufacturer, a service
17. lf the power cord is damaged, it must be replaced by a manufacturer, service agent
18. This device may not be used by persons who have physical, sensory or mental
abilities, or who lack experience and knowledge, including children, unless they are
supervised or prompted by the person responsible for their safety.
19. At least 6 inches of space should be left between the ice machine and any walls or
other objects to ensure free circulation of air.
20. Do not use mechanical equipment or other means to accelerate the defrosting
process except the method recommended by the manufacturer.
21. Do not damage the ice machine refrigeration tube.
22. Except for the type recommended by the manufacturer, the appliance shall not be
used in the ice storage room of the appliance.
or an explosion.
24. It is forbidden to store explosives such as gasoline, combustion-supporting sprays or
25. Under no circumstances should the ice machine be inclined more than 45 degrees.
26. When the machine is working, it is strictly forbidden to touch the evaporator by
hand.
lf the machinebreaks down, please wait for the machine to stop
6

phenomenon cause solution
The machine
does not
respond.
Not powered.
There is no power in the power
jack.
The power cord is not plugged
Check the power supply.
Check the power cord
connection.
Check the power cord for
damage.
Add water
indicator light on.
Lack of water.
Poor induction of the water
shortage sensor.
Please add water and restart
the machine.
restart the machine.
Ice full indicator
light on.
Ice basket is full.
Poor induction of ice full sensor. Clean the induction probe.
Please take out the ice cubes
from the ice basket.
Ice cubes stick
together.
Ice making environment
temperature or water
temperature is too low.
Replace the water.
The recommended water
temperature is at 45°F-90°F.
Replace the water.
The recommended water
temperature is at 45°F-90°F.
Ice making environment
temperature or water
temperature is too high.
Ice cubes smaller
than usual size.
The machine is
working properly
but does not
make ice.
Refrigeration pipe blockage.
Refrigerant leak.
Ice cubes are stuck in ice box.
Add water and ice
alternately.
restart the machine after
removing the stuck ice cubes.
Call an authorized technician to
repair.
Call an authorized technician to
repair.
Call an authorized technician to
repair.
Power cord is damaged.
7

Model
C5H10
18.7Lbs
Technical parameter
VH1032-SL / VH1032-RE
Applicable climate types
Grade of protection against electric shock
Ice storage capacity
Water tank volume
Rated voltage/frequency
Rated current
Refrigerant/Weight
Type of thermal insulation
Net weight
Product size
SN/N/ST
I
11*15.6*13.1Inch
R600a/0.05lb
1.4A
110V-120V/60Hz
71oz
1.5Lbs
9

To continuously improve its products, VIVOHOME reserves the right to modify this
For any questions during assembly, please watch the video in the product page for
reference. Or contact our customer service with any questions, comments, or concerns.
Thank you for using VIVOHOME products in your home!